金属－橡胶硫化粘接过程中分子取向行为的间接证据

对金属－橡胶热硫化粘接复合体的剥离行为进行了研究，同一粘接试样的双向１８０°剥离试验显示出了巨大的差异。本文分析了弹性材料在硫化过程中的分子行为，并提出了相应的新假设，认为这是由于金属－橡胶在硫化粘接过程中分子取向交联行为所致。这种双向１８０°剥离破坏现象可被看作是金属－橡胶硫化粘接过程中分子取向行为的间接证据。     

Analyses of the practical adhesion strengths of the metal/polymer interfaces in electronic packaging

There is a plethora of techniques to measure the adhesion strength of metal/polymer interfaces. However, the practical adhesion strength, which is the work done in separating the film from the substrate (or one film from another), is very sensitive to the test methods and the mechanical effects, such as the residual stress, thickness and mechanical properties of the layers, strain rate, and phase angle. Deriving intrinsic-adhesion properties of the interfaces, which are independent of such parameters, from the practical adhesion-strength measurements is a formidable task. In the present work, data from the three commonly used adhesion tests; pull-out, 90°-peel, and T-peel tests are compared with the intrinsic-adhesion properties of the interface, such as the interface-fracture toughness or the interface-fracture energy, and their implications are discussed. Material systems analyzed were Cu-based lead frame/epoxy-molding compound (EMC) and Cu/Cr/polyimide.     

Viscoelastic Windows of Pressure-Sensitive Adhesives

A viscoelastic window (VW) concept has been proposed to identify different types of pressure-sensitive adhesives (PSA's). Such viscoelastic windows are constructed from the values of dynamic storage modulus: G' and dynamic loss modulus G' at frequencies of 10^-2 and 10² rad/sec. These frequencies are chosen because the range covers most of the time scales corresponding to the uses of PSA's at different application rates in performance tests. A four quadrant concept has also been recommended to categorize different types of PSA's based on the location of their VW's on the log-log cross plot of G' and G'. It was found that for most PSA's, the range of G' and G' at room temperature within these selected frequencies falls between 10³ and 10⁶ Pascals. The proposed four-quadrants (top-left hand quadrant of high G' and low G', top-right hand quadrant of high G' and high G', lower left hand quadrant of low G' and low G', and lower right-hand quadrant of low G' and high G') correspond respectively to (1) non-PSA or release coatings (2) high shear PSA's, (3) removable PSA's and medical PSA's and (4) quick and cold stick PSA's. It was also observed that the VW's of general purpose permanent PSA's occupy the central region which straddles part of the four quadrants.     

微加速度计粘附问题的研究及应用

粘附是影响微机电系统(MEMS)可靠性的重要因素之一。针对MEMS的典型产品——微加速度计的粘附问题进行了研究,给出了2种典型的微加速度计的表征粘附特性的剥离数的表达式,并分析了将粘附条件应用于微加速度计的多学科设计优化之中,分析了其对系统结构设计产生的影响。     

GJ5×2双槽剥片机及其在高岭土剥片中的应用

GJ5×2大型双槽剥片机是国内超细物料加工中最新出现的超细磨/剥片设备,也是目前国内这一领域内最大规格的设备,已成功应用于煤系硬质高岭土剥片中,单机能力可达1.5～2.0t/h,产品细度可达小于2μm颗粒占85%～90%。     

SEM observation of the “orange peel effect” of materials

This study investigated the peculiar “orange peel” effect often observed in nanomaterials using high-resolution scanning electron microscopes. The study used different materials, including semiconductor thin films and ceramic nanoparticles. The investigation established that the “orange peel” is of an artifact caused by the metallic coating of the samples in sample preparation. This discovery is important in eliminating the misinterpretation of such effect on the true surface feature of materials, hence avoiding the confusion in the discussion of the properties of nanomaterials.     

The Interlaminar Bond Strength of Flexible Polymer-Metal Laminates

An alternative test method to the traditional 180° “T” peel test has been developed for the measurement of interlaminar bonding in three-ply (polyester/aluminium/polypropylene) flexible-packaging, laminate materials. The new test is thought to involve mixed mode I (opening) and mode II (shearing) failure, and takes into account the yielding of the polypropylene layer during testing. The method allows more direct comparisons between materials to be made, and allows the measurement of strong bonds, where a peel test would result in yield or fracture of the substrate arms before debonding.     

Surface modification of tetrafluoroethylene–perfluoroalkyl vinylether copolymer (PFA) by plasmas for copper metallization

Tetrafluoroethylene–perfluoroalkyl vinylether copolymer (PFA) sheet surfaces were modified with argon, helium, oxygen, and hydrogen plasmas. How the four plasmas modified the PFA sheet surfaces was investigated. All plasmas modified the PFA surfaces and at the same time initiated degradation of the PFA polymer chains. The balance between modification and degradation was strongly influenced by the magnitude of the discharge current in the plasmas. Efficiency of the plasmas in modification was hydrogen plasma > oxygen plasma > argon plasma > helium plasma. The modification involved defluorination of CF₂ carbons into CHF and CH₂ carbons and oxidation into O? CH₂, O? CHF, and O? CF₂ groups. The surface‐modification technique (a combination of hydrogen plasma treatment and silane coupling treatment) proposed in this study was applied for copper metallization of the PFA surface. The utility of the technique was confirmed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1087–1097, 2002     

大孔吸附树脂纯化石榴皮多酚

从D3520、D4020、AB-8、D140、D141、D160、DM-301、DA-201、SAD-7和D101大孔吸附树脂中筛选出D141树脂,研究了其对石榴皮多酚的静态与动态吸附和解吸性能。结果表明,D141树脂对石榴皮多酚的饱和吸附量为19.86 mg/g(干树脂),吸附等温线符合Langmuir方程,饱和吸附时间为5 h,适宜解吸剂为体积分数70%的乙醇溶液;以质量浓度9 mg/mL的石榴皮提取液上柱,流速为1.8~2.0 BV/h时,树脂的多酚穿透吸附容量为39.42 mg/g(干树脂),2.5 BV体积分数70%的乙醇溶液可将吸附于柱上的石榴皮多酚完全洗脱。以该条件纯化石榴皮多酚提取物时,纯化样的收率为15.4 g/100 g(石榴皮),多酚质量分数从34%提高到76.34%。     

Peel Adhesion of Poly(Vinyl Chloride) to Nitrile Rubbers

In addition to molecular interaction and physical entanglement of the molecular chains across the interface in poly (vinyl chloride)-nitrile rubber joints, at high temperatures and long contact times interfacial chemical bonds may be formed which seem to couple the two adherends thereby resulting in cohesive failure of the rubber matrix on peeling. This is verified by performing the peel tests at high temperatures, low peel rates and under swollen conditions. Infrared spectroscopic studies of the PVC/NBR blend reveal the formation of chemical bonds at the contact temperatures studied. The peel fracture energy is found to depend on the acrylonitrile content and presence of carboxylic content in the NBR, and the presence of stabilizer and plasticizer in the PVC phase, in addition to the molding and testing conditions.