Secure image encryption scheme using 4D-Hyperchaotic systems based reconfigurable pseudo-random number generator and S-Box

This paper introduces the design of a hardware efficient reconfigurable pseudorandom number generator (PRNG) using two different feedback controllers based four-dimensional (4D) hyperchaotic systems i.e. Hyperchaotic-1 and -2 to provide confidentiality for digital images. The parameter's value of these two hyperchaotic systems is set to be a specific value to get the benefits i.e. all the multiplications (except a few multiplications) are performed using hardwired shifting operations rather than the binary multiplications, which doesn't utilize any hardware resource. The ordinary differential equations (ODEs) of these two systems have been exploited to build a generic architecture that fits in a single architecture. The proposed architecture provides an opportunity to switch between two different 4D hyperchaotic systems depending on the required behavior. To ensure the security strength, that can be also used in the encryption process in which encrypt the input data up to two times successively, each time using a different PRNG configuration. The proposed reconfigurable PRNG has been designed using Verilog HDL, synthesized on the Xilinx tool using the Virtex-5 (XC5VLX50T) and Zynq (XC7Z045) FPGA, its analysis has been done using Matlab tool. It has been found that the proposed architecture of PRNG has the best hardware performance and good statistical properties as it passes all fifteen NIST statistical benchmark tests while it can operate at 79.101-MHz or 1898.424-Mbps and utilize only 0.036 %, 0.23 %, and 1.77 % from the Zynq (XC7Z045) FPGA's slice registers, slice LUTs, and DSP blocks respectively. Utilizing these PRNGs, we design two 16 × 16 substitution boxes (S-boxes). The proposed S-boxes fulfill the following criteria: Bijective, Balanced, Non-linearity, Dynamic Distance, Strict Avalanche Criterion (SAC) and BIC non-linearity criterion. To demonstrate these PRNGs and S-boxes, a new three different scheme of image encryption algorithms have been developed: a) Encryption using S-box-1, b) Encryption using S-box-2 and, c) Two times encryption using S-box-1 and S-box-2. To demonstrate that the proposed cryptosystem is highly secure, we perform the security analysis (in terms of the correlation coefficient, key space, NPCR, UACI, information entropy and image encryption quantitatively in terms of (MSE, PSNR and SSIM)).     

NIST Chemistry Webbooks数据库的批量查询和数据采集

NIST(The National Institute of Standards and Technology)Chemistry web Books(即美国国家标准与技术局化学数据库)是提供各种化合物化学和物理性质的免费查询数据库。作者简单介绍了NIST网上化学数据库Chemis-try Webbooks的查询语法。并根据自己的使用经验用示例详细介绍了自己开发的NIST数据库的批量查询和数据采集软件。成功地解决了NIST不能批量查询，及查询后有效数据的自动采集问题。     

国外化工数据编篡进展简介

介绍了美国ＤＩＰＰＲ、德国ＤＥＴＨＥＲＭ和日本ＮＩＳＴ的组织情况和编篡工作，从此得到启示，以求加速我国化工物性数据编篡工作的发展。     

Effectiveness of Security Control Risk Assessments for Enterprises: Assess on the Business Perspective of Security Risks

ABSTRACT

Today's businesses being IT enabled, the complexity of risks affecting the business has increased manifold and the need to gauge the Information Technology risks acting on the business operations has become paramount. The business managers who run business operations need to operate securely and seamlessly leveraging Information Technology and ability to recover and resume the business without any loss of confidentiality, integrity and availability of business information/data in any event of a security incident.

There is a need to quantify the impact of the IT security risk on the critical business processes, and provide the business-level insight at the management level. It is critical to classifying the Risk Ratings as per the impact on the business operations. This approach allows the organizations to understand and prioritize the security risk management activities that make the most sense for their organization to secure the business operations instead of trying to protect against every conceivable threat.     

一种新型指数混沌系统及其DSP数字化实现

该文提出了一种基于Chen系统的新型三维指数混沌系统.重点分析了系统参数对整个混沌系统的影响,给出了混沌系统吸引子图,Lyapunov指数图,分叉图等.最后利用DSP实现了该混沌系统,并对由系统生成的数字序列做了NIST测试,测试结果表明序列性能良好.     

Experimental heat transfer in supercritical water flowing inside channels (survey)

This literature survey is for heat transfer to supercritical water flowing in channels. The objectives are to assess the work that was done and to understand the specifics of heat transfer at these conditions. Our exhaustive literature search, which included over 450 papers, showed that the majority of experimental data were obtained in vertical tubes, some data in horizontal tubes and just a few in other flow geometries including bundles. In general, the experiments showed that there are three heat transfer modes in fluids at supercritical pressures: (1) normal heat transfer, (2) deteriorated heat transfer with lower values of the heat transfer coefficient (HTC) and hence higher values of wall temperature within some part of a test section compared to those of normal heat transfer and (3) improved heat transfer with higher values of the HTC and hence lower values of wall temperature within some part of a test section compared to those of normal heat transfer. The deteriorated heat transfer usually appears at high heat fluxes and lower mass fluxes. Also, a peak in HTC near the critical and pseudo-critical points was recorded. Due to the limited number of publications that are devoted to heat transfer in bundles cooled with water at supercritical pressures, more work is definitely needed to provide the additional information for design purposes.     

Accuracy and precision of quantitative energy-dispersive x-ray spectrometry in the environmental scanning electron microscope

The accuracy and precision of quantitative energy-dispersive x-ray spectrometry in the environmental scanning electron microscope have been estimated using a series of copper / gold alloys of known composition. The mean values (five to six replicate experiments) had relative errors within +/- 5%, and most were within +/- 3.5%. All relative standard deviations were < 5% and most were < 3%. Since the standard specimens were large (approximately 500 microm) in diameter, electron scattering in the 2 torr of water vapor above the specimen did not affect the results. This level of accuracy and precision was possible only by using a novel specimen surface charge neutralization scheme.     

Liquid penetration length of heptamethylnonane and trimethylpentane under unsteady in-cylinder conditions

While strategies employing early or late direct-injection of fuel can improve emissions, they also can lead to impingement of liquid-phase fuel on the piston and/or cylinder wall due to low in-cylinder temperatures and densities during the injection event. Previous work has shown that liquid-phase fuel films formed in this way can lead to pronounced degradations in efficiency and emissions. To avoid these problems, a quantitative understanding of fuel-property effects on the liquid penetration length is needed, and this understanding must include conditions where in-cylinder thermodynamic conditions and the injection rate vary with time. This work reports liquid penetration lengths measured in an optical engine under such time-varying conditions. Diagnostics included laser light scattering for measurement of the liquid length and conventional pressure-data acquisition for heat-release analysis. Unsteady liquid penetration was characterized for different injection timings, injection pressures, intake-manifold pressures, and fuel volatilities to gain an understanding of the relative importance of these factors. Fuel volatility was studied by using two fuels, 2,2,4,4,6,8,8-heptamethylnonane (HMN) and 2,2,4-trimethylpentane (TMP), which have very different volatility characteristics. Measured liquid lengths changed as in-cylinder conditions changed, with increasing temperature and density during the compression stroke causing a decrease in liquid length, and decreasing temperature and density during the expansion stroke causing an increase in liquid length. Intake-manifold pressure and fuel volatility were found to be primary factors governing liquid length. Heat loss from the charge gas to the engine and local charge cooling due to fuel vaporization were found to have a secondary influence on liquid length. Injection pressure was found to have little effect.     

Life-cycle carbon and cost analysis of energy efficiency measures in new commercial buildings

Energy efficiency in new building construction has become a key target to lower nation-wide energy use. The goals of this paper are to estimate life-cycle energy savings, carbon emission reduction, and cost-effectiveness of energy efficiency measures in new commercial buildings using an integrated design approach, and estimate the implications from a cost on energy-based carbon emissions. A total of 576 energy simulations are run for 12 prototypical buildings in 16 cities, with 3 building designs for each building-location combination. Simulated energy consumption and building cost databases are used to determine the life-cycle cost-effectiveness and carbon emissions of each design. The results show conventional energy efficiency technologies can be used to decrease energy use in new commercial buildings by 20-30% on average and up to over 40% for some building types and locations. These reductions can often be done at negative life-cycle costs because the improved efficiencies allow the installation of smaller, cheaper HVAC equipment. These improvements not only save money and energy, but reduce a building’s carbon footprint by 16% on average. A cost on carbon emissions from energy use increases the return on energy efficiency investments because energy is more expensive, making some cost-ineffective projects economically feasible.     

NIST Calibration of a Neutron Spectrometer ROSPEC

A neutron spectrometer was acquired for use in the measurement of National Institute of Standards and Technology neutron fields. The spectrometer included options for the measurement of low and high energy neutrons, for a total measurement range from 0.01 eV up to 17 MeV. The spectrometer was evaluated in calibration fields and was used to determine the neutron spectrum of an Americium-Beryllium neutron source. The calibration fields used included bare and moderated ²⁵²Cf, monoenergetic neutron fields of 2.5 MeV and 14 MeV, and a thermal-neutron beam. Using the calibration values determined in this exercise, the spectrometer gives a good approximation of the neutron spectrum, and excellent values for neutron fluence, for all NIST calibration fields. The spectrometer also measured an Americium-Beryllium neutron field in a NIST exposure facility and determined the field quite well. The spectrometer measured scattering effects in neutron spectra which previously could be determined only by calculation or integral measurements.