Effect of select parameters on the properties of edible film from water-soluble fish proteins in surimi wash-water

Edible film from water-soluble fish proteins were developed by casting film solution on leveled trays and effects of pH (9.5, 10.0 and 10.5), heating temperature (60, 70 and 80 °C), and heating time (10, 20 and 30 min) of the film solution on various film properties were determined using Response Surface Methodology (RSM). The impact of pH and heating temperature of film solution was more significant, overall, on the film's properties than heating time. Contour plots of tensile strength and elongation at break was highest at pH of 10.0 at 70 °C (2.75-3.02 MPa) but low in elongation at break (6.35-9.16%), while water vapor permeability and oxygen permeability were at their lowest (58.55-65.96 g mm/m² d kPa and 351.33-624.18 cm³ μm/m² d kPa). There was a direct correlation between the films’ and proteins’ solubility on one hand, and heating temperature of film solution on the other, which reversed with change in pH of film solution. Film color was darker and more yellowish with increase in the pH of film solution.     

Effects of Contaminants on Toxicity of the Lampricides TFM and Bayer 73 to Three Species of Fish

Waters in the Great Lakes basin contain more than 400 contaminant chemicals that potentially affect fishery resources, commerce, and human inhabitants. We determined in the laboratory the effects of selected contaminants on the toxicity of the widely used lampricides TFM (3-trifluoromethyl-4-nitrophenol) and Bayer 73 (2′,5-dichloro-4′-nitrosalicylanilide) to three species of fish—rainbow trout (Salmo gairdneri), white sucker (Catostomus commersoni), and fathead minnow (Pimephales promelas). The fish were exposed to paired mixtures of lampricides and selected contaminants in standardized, acute static toxicity tests to determine the resulting type of response—less than additive, additive, or greater than additive (synergistic). As expected, the toxicities of combinations of lampricides with organic pesticides, metal, industrial or municipal pollutants, and tannic acid were mostly additive. However, the toxicity of a combination of TFM, Delnav, and malathion was synergistic, and extremely small quantities of each chemical became lethal when mixed. The concentration that produced 50% mortality was 1.64 mg/L for TFM alone but only 0.041 mg/L for TFM with the pesticides. Toxicities of the pesticides in the combination also increased commensurately. The triple combination of chemicals produced extraordinary synergism and effectively demonstrated the hazards that may result if certain chemical combinations occur in the aquatic environment. However, synergism is not the only kind of toxic action that produces hazards to aquatic organisms. All three types of toxic action are of concern because toxic units produced by contaminant chemicals add to the toxic units of applied management chemicals. Since the toxicity of the majority of chemical combinations is simply additive, this cumulative toxic action contributes more total units to aquatic environments than the extreme actions of less than additive and synergism. The toxicity of the lampricide TFM, as well as other management chemicals, is reinforced by the presence of any contaminant that contributes additional units of toxicity. Therefore, all types of cumulative toxic action should be of concern to people and agencies involved with protecting the environment.     

Diel Vertical Migration of Round Goby Larvae in the Great Lakes

One hypothesis for the transcontinental and intra-Great Lakes basin transfer of round gobies (Neogobius melanostomus) has been that round gobies were pumped into the ballast water of ships. During June 2005 in Lake Erie, we obtained evidence of a vertical migration of round goby larvae, when we collected 167 round goby larvae in surface ichthyoplankton net tows at night and zero during day. These results complemented similar findings from the Muskegon River estuary of Lake Michigan during 2003 and 2004, documenting diel vertical migration for the first time in larval round gobies. We suggest vertical migration behavior may have allowed larval round gobies to be transported to and within the Great Lakes via ballast water and dispersed in the Great Lakes via advection of 6.5–8.5-mm long larvae at the surface. Based on our results, if ballast water was only taken on near the surface during daylight hours from May through September when larval round gobies were present, it would have mitigated the spread of round gobies throughout the Great Lakes.     

铁水鱼雷罐的检测方案研究

论文介绍了一种针对铁水鱼雷罐车铁水液位检测的较为可行的低成本方案。采用车上间接称重、远红外非接触传输信号方式，解决了对移动铁水罐车进行实时监测的难题。     

Influence of Production Process Parameters on Fish Oil Quality in a Pilot Plant

ABSTRACT: A pilot plant used for upgrading herring byproducts into fish oil was analyzed on its operational efficiency and product quality. The temperature of the heat exchanger and the speeds of the pump and the 3-phase decanter were varied according to a 2³ fractional factorial design. The initial amount of oxidation products present in the crude oil, its storage stability, and the yields from the different obtained products were determined. Multivariate data analysis of the advanced screening stage showed that T had neither influence on the quality nor on the yield in contrast to D and MP (P < 0.05). Process optimization results showed that the quality of the oil was influenced by an interaction effect between the speed of the MP and the D. Oils processed with the highest MP speed were the most stable during storage.     

Concentration of docosahexaenoic acid in glyceride by hydrolysis of fish oil withcandida cylindracea lipase

In an attempt to concentrate the content of DHA (docosahexaenoic acid) in a glyceride mixture containing triglyceride, diglyceride and monoglyceride, fish oil was hydrolyzed with six kinds of microbial lipase. After the hydrolysis, free fatty acid was removed and fatty acid components of the glyceride mixtures were analyzed. When the hydrolysis withCandida cylindracea lipase was 70% complete, the DHA content in the glyceride mixture was three times more than that in the original fish oil. The EPA (eicosapentaenoic acid) content became almost 70% of the original fish oil. Hydrolysis with other lipases did not result in an increase in the DHA content in the glyceride mixtures. Hydrolysis of DHA-rich tuna oil (DHA content is about 25%) withCandida cylindracea lipase resulted in 53% DHA in the glyceride mixture. The EPA content, however, remained close to that of the original tuna oil. In this report, the acyl chain specificity of lipases is evaluated in terms of hydrolysis resistant value (HRV). HRV is the ratio between the DHA contents in the glyceride mixture of hydrolyzed oil and original oil. HRV clearly indicates differences in hydrolysis between DHA and other fatty acids (e.g., saturated and monoenoic acids).     

Solids Extraction of Cod Frame and Effects on Ultrafiltration of the Aqueous Extract

Grinding, pH adjustment, heat treatment and centrifugation were studied to recover solids from ground cod frames and to apply ultrafiltration (UF) to the resulting aqueous phase. Early heat treatment (90°C/20 min) dissolved collagen into aqueous phase resulting in a very low UF flux. A pH adjustment to 4.5 after grinding (～0.32 cm die), with no heat resulted in efficient separation after centrifuging. UF of the aqueous phase showed an increase in initial flux (23 L/hr m²). However, when the same aqueous material was heated and then centrifuged (1–2% solids removed), UF flux was further increased to 46 L/hr m²and this process gave highest solids recovery (90%).     

European intercomparison on electron spin resonance identification of irradiated foodstuffs

The results of a co-trial organized by the Community Bureau of Reference on the use of Electron Spin Resonance spectroscopy for the identification of irradiated food in 21 laboratories are presented. The trial was qualitative on beef and trout bones, sardine scales, pistachio nut shells, dried grapes, and papaya, and quantitative on poultry bones. There was no difficulty in identifying irradiated meat bones, dried grapes, and papaya. In the case of fish bones there is a need for further kinetic study on different species. Identification of irradiation in pistachio nuts is more complicated and additional research is needed before further trials. All laboratories were able to distinguish between chicken bones irradiated at 1 to 3 kGy or 7 to 10 kGy although there was a partial overlap between the results.     

Comparison of six methylation methods for analysis of the fatty acid composition of albacore lipid

Six methods widely used to produce methyl esters for the gas chromatographic determination of the fatty acid composition of a marine lipid were compared. Four acid-catalyzed methods (1% H₂SO₄: CH₃OH; 5% HCl: CH₃OH; 7% and 14% BF₃: CH₃OH) and two base-catalyzed methods [0.5M NaOCH₃: CH₃OH; (1:4) tetramethylguanidine: CH₃OH] were used.
The use of BF₃: CH₃OH (7% and 14%) gave a lower content of 18:1 n9 than the other methods and produced an artefact (2.7–3.2% of total fatty acid content) eluting between the 20:5 and 24:1 fatty acid methyl esters. No significant differences were obtained between the other four methods.
Accordingly the use of BF₃: CH₃OH for transmethylation of marine lipids is not recommended. Results obtained in the other four methods showed that all are comparable.