寒区沥青胶浆延性研究

首交提出了沥青胶浆延工的概念，并测定、分析了两种寒区沥青、四种粉胶比在四个温度下的沥青胶浆延度。认为沥青胶浆延度较沥青延度更能反映沥青混合料的流变性能，而且胶浆延度与温度、粉胶比之间有很好的相关性。     

X-ray microtomography: Application to microstructure analysis of a cementitious material during leaching process

Leaching of cementitious materials leads to an increase in porosity, which has important consequences on transport and mechanical properties. The present study outlines the characterization of microstructural evolution in a mortar subjected to a chemical attack, by means of a powerful non-intrusive experimental method, namely synchrotron X-ray computed microtomography. This innovative method is used to measure the variation of porosity in a leached mortar. Having described the effects of leaching in mortar (influences on microstructure and on mechanical properties), we present the accelerated leaching process and the microtomographic analysis that have been used to monitor it. We then investigate the capacity of this method to quantify the evolution of porosity during the leaching process. The method is validated by comparison of the results obtained with data available in the literature.     

在建坝体中部分浆砌石的控制爆破拆除

某在建大坝部分浆砌石坝体因质量不合格须爆破拆除。保护余留坝体免受爆破影响是此工程的重点,为此,采用了小直径浅孔和微差爆破分层拆除方法,被拆除部分和被保护部分之间预留保护层。爆破施工过程中,利用超声波观测法和压水试验法判断被保护坝体是否受到了爆破震动的影响。根据判断结果,调整爆破参数,以减小爆破震动。文中论述了爆破参数的选择、保护层厚度的确定,同时介绍了安全控制技术、测点布置以及监测结果。     

Magnetic resonance imaging of H, Na, and Cl penetration in Portland cement mortar

The first magnetic resonance imaging profiles of chloride content in low- and high-permeability Portland cement mortar have been obtained using a novel material science imaging technique. The penetration of water as well as chloride and sodium ions, into mortar specimens was monitored for a period of 72 h. Marked differences in penetration depth were observed in low- and high-permeability mortar. These preliminary experiments show significant differences between the extent and nature in the penetration of chlorides compared to water and sodium.     

浅谈制浆和混凝土搅拌机

水泥浆通常作为预应力孔道的灌浆材料,是防止预应力筋锈蚀和部分传递预应力的一种常用建筑材料,一般采用水泥浆搅拌机现场拌制。在我们工程实践中,由于工地条件有限,经常会遇到一些施工单位为了省事,要求用混凝土搅拌机替代专用制浆设备而进行制浆     

The hydration phase and pore structure formation in the blends of sulfoaluminate-belite cement with Portland cement

Sulfoaluminate-belite (SAB) cements are an attractive class of low-energy cements from the viewpoint of saving energy and releasing less CO₂ into the atmosphere during their production. Their hydraulic activity, however, does not match that of the ordinary Portland cement (PC) and needs improvement before they can be used on their own. However, SAB cements when blended with PC have the potential to be used effectively in traditional applications as shown by this study. Mortars made with blends of SAB cements and PC, and a cement-to-sand ratio of 1:3 by weight and a water-to-cement ratio of 0.5, indicate a superior protection against corrosion of steel to those made with blends of PC and blast-furnace slag (BFSPC). The prepared mortars were stored at 20 °C for 90 days under either a 60% relative humidity (RH)-dry air, or 100% RH-wet air conditions. With further improvement in the SAB cement quality through better understanding of their characteristics, a genuine competition between SAB/PC and BFSPC can be expected in practice.     

Mortar finite element discretization for the flow in a nonhomogeneous porous medium

Darcy’s equations model the flow of a viscous incompressible fluid in a rigid porous medium. One of the parameters of the system depends on the permeability of the medium and, when this medium is not homogeneous, the variations of the parameter could be very high. To handle this phenomenon, we propose a discretization of the model that relies on the mortar finite element method. Indeed, the idea is to construct a decomposition of the domain such that the permeability is constant on each element of the partition and to use independent meshes on the different subdomains. We perform the a priori and a posteriori analysis of this discretization and present some numerical experiments which are in good coherency with the results of the analysis.     

消失模铸造在轧臼壁生产中的应用

介绍了用消失模铸造生产圆锥破碎机轧臼壁的工艺过程,实践证明,用消失模工艺生产的轧臼壁具有工期短、成本低、成品率高、铸件表面质量高等特点.     

Characterisation of mortar morphology in thin sections by digital image processing

A digital imaging approach was applied to investigate mortar morphology in thin sections; in particular, the binder/aggregate ratio and the grading curve of five mortar bars were attained by digital image processing (DIP), using the Image Pro Plus 4.1 software package. The imaging procedure employed image segmentation, to extract mortar aggregate, and image filtering, to fix grain boundaries. The results show that digital image processing may be considered as an alternative method to mechanical sieving for the characterisation of mortar morphology, as it appears to be quicker and more accurate than the traditional method. However, digital image processing exhibits limits, which are discussed in the text.     

Influence of aggregates on chloride diffusion coefficient into mortar

In order to determine the influence of aggregates on chloride ion ingress, mortar specimens were cast with different aggregate size distribution and the same aggregate volume content. One side of the specimen was in contact with alkaline solution containing sodium chloride. The process of chloride ingress is due to diffusion. The effect of the interfacial transition zone (ITZ) around aggregate and of the tortuosity due to aggregates have been taken into account for interpreting the experimental data obtained. These two competing effects have been quantified by using the theory of composite materials. It appears that the diffusion coefficient varies as a function of the ITZ volume content and of the tortuosity.