Fast convergent study on potential－harmonic method of directly solving Schrodinger equation in few－body systems

Ｆａｓｔｃｏｎｖｅｒｇｅｎｔｓｔｕｄｙｏｎｐｏｔｅｎｔｉａｌ－ｈａｒｍｏｎｉｃｍｅｔｈｏｄｏｆｄｉｒｅｃｔｌｙｓｏｌｖｉｎｇＳｃｈｒｏｄｉｎｇｅｒｅｑｕａｔｉｏｎｉｎｆｅｗ－ｂｏｄｙｓｙｓｔｅｍｓＷａｎｇＹｉ－Ｘｕａｎ（王沂轩）ａｎｄＤｅｎｓＣｏｎｇ...     

正交曲线坐标下三维代数应力通量模型

针对弯曲及不规则明渠的水动力及物质输运特性，本文建立了曲线坐标系下的三维代数应力通量数学模型，对平面上弯曲及不规则复杂边界情形，采用Poisson方程进行正交曲线坐标变换，各向异性的湍流代数应力通量模型被引用于本文的模拟计算中，以体现复杂边界条件引起的水动力及物质输运特性的变化。通过180度强弯曲明渠水槽及贵溪电厂不规则边界河段物理模型试验两个实例计算表明，实测值与计算吻合良好，效果令人满意。     

凸非球面补偿检验的工艺球面分析解

本文从三级像差理论出发,推导了几种工艺球面检验凸二次曲面的计算公式。根据这些公式计算结果,进行了光路追迹,给出了这些公式对凸二次曲面的补偿范围;并讨论了几种特殊情况下的平面解。     

Time-Space Label Switching Protocol (TSL-SP)—A New Paradigm of Network Resource Assignment

In this paper we propose a new protocol called time-space label switching protocol (TSL-SP) in optical burst switching (OBS), and define the terms time-space label (TSL) and time-space routing (TSR). An important concept of response time is introduced in the time label mechanism. The TSL-SP is a new technology that can quickly and efficiently forward data with a label on the optical networks. A two-dimension label switched path (TD-LSP) can be set up, that is maintained and deleted by the TSL-SP. For clearly illuminating the operation principles of the TSL-SP, we propose a new approach of orthogonal time-space coordinates in which the vertical coordinate is the space label and the horizontal coordinate is the time label. The proposed TD-LSP can dramatically reduce the routing failure probability and greatly improve the link network efficiency compared with other signaling protocols. Moreover, we define the time-space label control plane that can achieve the higher efficiency. When the TSL-SP is applied to networks, switching performance can be improved by two orders compared to the switching performance with the conventional OBS signaling protocols. The fundamental goal of TSL-SP is to band the signaling and routing functions together closely. Also, the TSL-SP can reduce the complexity of the network, support automatic service offering, and provide traffic engineering.     

A mathematical model for wet-chemical diffusion-controlled mask etching through a circular hole

Asymptotic solutions are presented for diffusion-controlled wet-chemical etching through a round hole in a mask. The three-dimensional diffusion field is assumed to be axisymmetric and fully developed. Two time regimes are considered. The first applies when the etched depth is small in comparison with the width of the mask opening. In the second, the depth of etching is much greater than the width of the mask opening. Explicit solutions are found for the shape of the etched surface as a function of the physical parameters. Among other things it is found that, as long as the etched pits are shallow, etching through small apertures is faster than through larger ones. The opposite is true for deep pits.     

Biomimetic synthesis of spherical nano-hydroxyapatite in the presence of polyethylene glycol

Spherical nano-hydroxyapatite (nano-HA) was synthesized successfully by a biomimetic method using Ca(NO₃)₂·4H₂O and (NH₄)₃PO₄·3H₂O as reagents in the presence of polyethylene glycol (PEG). The crystalline phase, microstructure, chemical composition, and morphology of the obtained samples were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). The results show that spherical nano-HA with diameter of 30–50 nm can be synthesized in the presence of a certain concentration (2–6%) of PEG. The crystallinity of HA powder synthesized in the presence of PEG was higher than that synthesized in the absence of PEG, but the crystallinity of HA reduced with increasing the concentration of PEG. The electrical conductivity (EC) of the solution revealed that PEG reduced the transfer rate of Ca²⁺ in the process of HA crystallization, indicating the interaction between PEG and HA. The possible mechanism of formation spherical nano-HA was discussed.     

液化气球罐焊缝H2S应力腐蚀裂纹的返修补焊

对宁夏炼油厂一台200m3低合金钢球罐H2S应力腐蚀裂纹采用气刨打磨后补焊的返修方法表明，碳弧气刨时的骤热不会使裂纹向纵深扩展，只是必须在补焊前将返修部位焊缝两侧各100mm范围内打磨至完全露出金属光泽，以便彻底消除裂纹源，避免补焊时再产生新的微小裂纹。若返修深度不大于罐壁厚度的二分之一，则不必进行射线探伤检查，只须进行100％的超声波检查，在水压试验前后对返修部位进行100％磁粉探伤则是非常必要的。     

球形容器自增强最优化设计

本文以弹性失效准则及强度理论为基础，按Ｔｒｅｓｃａ屈服条件，给出了球形容器自增强处理的最优化设计方法，同时符合：ｍａｘ、ｍｉｎＫ和ｍｉｎ（σｅｑ）ｍａｘ３个优化目标，并满足（σｅｑ）ｍａｘ≤ ［σ］和（ σθ＇－σｒ＇）ｒ＝Ｒｉ＞－σｓ两个约束条件。该优化设计方法可达用于工程设计。     

厚壁球壳冲压成形过程的热力耦合分析

采用大变形弹塑性热力耦合方法,对厚壁球壳的拉深成形过程进行了模拟,得到了各种变形场量信息,并定量分析了热力耦合模拟精度,对指导实际生产有较大意义。     

Curvilinear grids for WENO methods in astrophysical simulations

We investigate the applicability of curvilinear grids in the context of astrophysical simulations and WENO schemes. With the non-smooth mapping functions from Calhoun et al. (2008), we can tackle many astrophysical problems which were out of scope with the standard grids in numerical astrophysics. We describe the difficulties occurring when implementing curvilinear coordinates into our WENO code, and how we overcome them. We illustrate the theoretical results with numerical data. The WENO finite difference scheme works only for high Mach number flows and smooth mapping functions, whereas the finite volume scheme gives accurate results even for low Mach number flows and on non-smooth grids.