Nondestructive evaluation of the characteristics of degraded materials using backward radiated ultrasound

The frequency dependency of Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in two kinds of degraded specimens by scuffing or corrosion. Then, the frequency dependency is compared with the residual stress distribution or the corrosion-fatigue characteristics for the scuffed or corroded specimens, respectively. The width of the backward radiation profile increases with the increase of the variation in residual stress distribution for the scuffed specimens. In the corroded specimens, the profile width decreases with the increase of the effective aging layer thickness and is inversely proportional to the exponent, m, in the Paris’ law that can predict the crack size increase due to fatigue. The result observed in this study demonstrates high potential of backward radiated ultrasound as a tool for nondestructive evaluation of subsurface gradient of material degradation generated by scuffing or corrosion.     

Non-destructive testing of rock bolts using guided ultrasonic waves

The research outlined in this paper is aimed at the development of a portable non-destructive testing instrument for evaluating the condition of rock bolts. In applications such as coal mine roof reinforcement, the opportunities for rock bolt inspection are currently limited to destructive techniques such as the pull-out test. It is proposed that guided ultrasonic waves can be used to solve this inspection problem, using a pulse-echo test carried out from the free end of the bolt. Suitable test frequencies have been identified through the use of modelling software, and successful laboratory and site trials have been undertaken. The research has shown that the proposed approach is capable of determining the bolt length, and of identifying major defects such as necking, deformation, and loss of resin encapsulation.     

Hybrid of multi-signal processing methods for detection of small objects in containers filled with beverages using ultrasound

Ultrasound backscattered signals for object detection could be too weak to be perceived when superposed to strong reflection signals, and could also be complicated either in time or frequency domain. These peculiarities raise a challenge for signal processing methods. In this paper four signal processing methods were studied to detect objects in containers. Root mean squares (RMS) method was better in object detection but needed to combine other methods to increase detection success rate. Variance, center frequency pressure ratio (CFPR) and backscattered amplitude integral (BAI) methods have similar overall detection ratings. The optimal signal size, to increase the detection ability, corresponded approximately to the length of reverberation signals before it was dissipated.     

Performance of the polymer- and oxide-supported triphase catalysts and effect of ultrasound on their stabilities

In this study, several trialkylamines were immobilized on chloromethylated polystyrene (CMPS), silica gel, and alumina to prepare triphase catalysts for catalyzing the etherification reaction of allyl bromide (the organic reactant) and sodium phenolate (the aqueous reactant). The reactor was agitated mechanically or with the aid of ultrasonic vibration. Performances of the prepared catalysts were compared, and the effect of imposing ultrasound was investigated based on the activity, selectivity, and stability of the catalyst. Experimental results show that tri-n-propylamine is the best active species when CMPS is used as the support, while tri-n-butylamine is the best when SiO₂ and Al₂O₃ are employed as the supports. The CMPS-supported catalyst is far better than the SiO₂- and Al₂O₃-supported catalysts in activity and selectivity but not in stability. Imposing the ultrasound can effectively increase the reaction rate. Mechanical agitation at a low speed with the imposition of ultrasonic vibration not only results in a conversion slightly higher than the case with a high mechanical agitation speed without ultrasonic vibration, but also gives a constant stability for the CMPS-supported catalyst.     

Performance characteristics of a therapeutic ultrasound wire waveguide apparatus

Therapeutic ultrasound angioplasty has been investigated, clinically, by a number of researchers and represents a potentially promising therapy for the treatment of atherosclerotic lesions. To date, there has been no detailed analysis of the effect of mechanical design parameters, such as wire geometry or damping characteristics, on wire waveguide performance. An apparatus capable of delivering therapeutic ultrasound down small diameter nickel–titanium (NiTi) wire waveguides is described. The output peak-to-peak (p–p) displacements at the distal tip of a 1.0 mm diameter waveguide were measured experimentally, by means of an optical microscope and image analysis software. The output was measured for a range of waveguide lengths from 118 to 303 mm. Wire waveguide distal tip displacements as high as 98 μm (p–p) at 23.5 kHz were measured. For the range of lengths tested, the experimental measurements show the critical relationship between the length of the waveguide and the output distal tip displacements. A finite element model that can predict the resonant frequencies and distal tip displacements of various wire waveguide geometries and configurations, including the effect of damping, is presented. This numerical model has been validated against the experimental displacement data obtained. This will be a valuable design tool for ensuring the safety and effectiveness of therapeutic ultrasound angioplasty procedures.     

超声波条件下除油技术的研究

在超声波条件下,研究确定了除油技术的清洗介质配方及运行条件,并对超声波、化学(声化)协同除油机理进行了分析讨论.研究结果表明,在声化条件下,研究确定的低浓度的碱性除油介质可在较低温度下,快速有效去除试样表面的油污;升高清洗液温度,可提高除油效率.     

Effect of ultrasound on thermoset polyurethane: NMR relaxation and diffusion measurements

Recycling of rubber-based materials is of increasing industrial environmental importance. In order to characterize the effect of ultrasound on polymer networks, nuclear magnetic resonance (NMR) relaxation and pulsed-gradient diffusion measurements were made at 70.5 °C in polyurethane rubber (PUR) and foam after subsequent treatment by intense ultrasound. The proton transverse relaxation decay was analyzed in terms of molecular and segmental mobilities of all motional species, a chemical and physical network as well as diffusing sol. The diffusivity spectrum, measurable in foams, reflected the changing molecular weight distribution of low-molecular weight sol and oligomers. It was observed that the effect of ultrasound was less pronounced in PUR than rubbers like SBR, PDMS and BR owing to its low degree of unsaturation. The investigation on the foams is the first of its kind to be reported.     

超声波气升式反应器内声压的测定

测定了在空气—水和空气—羧甲基纤维素水溶液体系中 (羧甲基纤维素含量 :2g/L)超声波气升式反应器声压随轴向位置、表观气速、黏度和超声电功率的变化。测定结果表明 ,小气速下声压在气升式反应器内的轴向分布与离开超声探头的距离有关 ,距离越远 ,声压越小 ;与气速的大小有关 ,气速越大 ,声压越小 ;与液体的黏度有关 ,黏度越大 ,声压越小 ;超声电功率越大 ,声压越大。     

Ultrasonic defouling of reverse osmosis membranes used to treat wastewater effluents

On-line ultrasonic cleaning was used to remove fouling from a commercially important polyamide based reverse osmosis membrane during cross-flow filtration of CaSO₄, Fe³⁺ and carboxyl cellulose solutions. In each case, the permeate flux of the membrane increased significantly, with virtually no decrease in rejection in the presence of ultrasonication. Membrane surface characterization via scanning electron microscopy (SEM) confirmed the beneficial effect of ultrasonication on the membrane permeate flux. These studies suggest that ultrasonic defouling may be a very useful approach for the future development of reverse membranes, especially as far as fouling with organic materials is concerned.