Modulation of electrical transport in calcium cobaltite ceramics and thick films through microstructure control and doping

Ca₃Co₄O₉ is a promising p-type thermoelectric oxide material having intrinsically low thermal conductivity. With low cost and opportunities for automatic large scale production, thick film technologies offer considerable potential for a new generation of micro-sized thermoelectric coolers or generators. Here, based on the chemical composition optimized by traditional solid state reaction for bulk samples, we present a viable approach to modulating the electrical transport properties of screen-printed calcium cobaltite thick films through control of the microstructural evolution by optimized heat-treatment. XRD and TEM analysis confirmed the formation of high-quality calcium cobaltite grains. By creating 2.0 at% cobalt deficiency in Ca_2.7Bi_0.3Co₄O_9+δ, the pressureless sintered ceramics reached the highest power factor of 98.0 μWm^?1 K^-2 at 823 K, through enhancement of electrical conductivity by reduction of poorly conducting secondary phases. Subsequently, textured thick films of Ca_2.7Bi_0.3Co_3.92O_9+δ were efficiently tailored by controlling the sintering temperature and holding time. Optimized Ca_2.7Bi_0.3Co_3.92O_9+δ thick films sintered at 1203 K for 8 h exhibited the maximum power factor of 55.5 μWm^?1 K^-2 at 673 K through microstructure control.     

厚煤层放顶煤大角度扇形收尾施工工艺实践

以左云长春兴煤业公司301综放工作面扇形收尾施工工艺为背景,介绍了在工作面受地质构造或者井田边界影响,工作面两顺槽与盘区大巷斜交布置时,为了多回收煤炭资源,提高经济效益,采取大角度扇形收尾的施工工艺,为厚煤层放顶煤大角度扇形收尾提供了借鉴和理论依据。     

Preparation of ultra-fine copper powder and its lead-free conductive thick film

In this paper, non-agglomerated monodispersed ultra-fine copper metallic powders have been synthesized with chemical reduction method. Fine lead-free glass powders were also prepared by solid synthesis process. Thick film paste prepared by above-mentioned copper metallic powders and lead-free glass powders was applied as conductive paste of MLCC. Mixture of glass and zinc oxide give the thick film a high adhesion strength which is attributed to the rough interface from interfacial reaction between glass and chip, and a good densification. Diffusion of metal between copper thick film and nickel thick film is clear. Ni-Cu solid solution appears under high temperature firing.     

EFFECT OF THE RATIO Th/U ON TL DATING ACCURACY

ＥＦＦＥＣＴＯＦＴＨＥＲＡＴＩＯＴｈ／ＵＯＮＴＬＤＡＴＩＮＧＡＣＣＵＲＡＣＹ￥Ｐ．Ｌ．Ｌｅｕｎｇ（梁宝鎏）；ＭｉｃｈａｅｌＪ．Ｓｔｏｋｅｓ（ＤｅｐａｒｔｍｅｎｔｏｆＰｈｙｓｉｃｓａｎｄＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅ，ＣｉｔｙＰｏｌｙｔｅｃｈｎｉｃｏ...     

Systematic analysis of neutron yields from thick targets bombarded by heavy ions and protons with moving source model

A simple phenomenological analysis using the moving source model has been performed on the neutron energy spectra produced by bombarding thick targets with high energy heavy ions which have been systematically measured at the Heavy-Ion Medical Accelerator (HIMAC) facility (located in Chiba, Japan) of the National Institute of Radiological Sciences (NIRS). For the bombardment of both heavy ions and protons in the energy region of 100–500 MeV per nucleon, the moving source model incorporating the knock-on process could be generally successful in reproducing the measured neutron spectra within a factor of two margin of accuracy. This phenomenological analytical equation is expressed having several parameters as functions of atomic number Z_p, mass number A_p, energy per nucleon E_p for projectile, and atomic number Z_T, mass number A_T for target. By inputting these basic data for projectile and target into this equation we can easily estimate the secondary neutron energy spectra at an emission angle of 0–90° for bombardment with heavy ions and protons in the aforementioned energy region. This method will be quite useful to estimate the neutron source term in the neutron shielding design of high energy proton and heavy ion accelerators.     

国内外厚煤层大功率电牵引采煤机机电一体化新技术

介绍国内外大功率厚煤层电牵引采煤机的机电一体化新技术,包括总体技术、交流变频电牵引技术、工况检测、故障诊断技术、自动调高技术、远程通讯和集中控制技术。     

厚膜导体的金属迁移研究

金属迁移能导致混合微电路发生灾难性失效。本文介绍一种简单易行的测试方法－水滴试验法，来测量厚膜电路的实际金属迁移率。用引方法测量时，发现Ｐｄ－Ａｇ导体的迁移率最大，Ｐｔ－Ａｕ导体的金属迁移率最小。     

均布压力作用下厚壁圆管弯矩计算方法的探讨

建立了厚壁圆管弯矩计算公式，通过分析的均布压力作用下厚壁圆管与薄壁圆管压力相对误差，给出了厚壁圆管与薄壁圆管分类原则，了解和掌握这一原则对工程师大有禅益。     

未知钍—铀比的误差分析

研究了在任意Th、U含量和Th-U比覆盖整个范围(即0≤Th/U≤∝)时总α计数率对年剂量的转换因子及其误差。结果表明,当不测定Th-U比而只测量总α计数率时,最终引起的年龄误差对0≤Th/U≤∝来说为±5.1％-±8.3％,对1.1≤Th/U≤9.5来说只有±2.5％％-±4.1％。     

测定厚壁圆筒弹性极限压力的液压实验方法

根据厚壁圆筒的弹性失效准则所确定的圆筒的弹性极限压力与材料的屈服极限的关系,设计了一套测定厚壁圆筒弹性极限压力的液压系统,并测得了一组实验数据.通过对该实验数据的分析得到了圆筒的弹性极限压力.该实验值与理论值误差较小,表明了该方法具有较高的可靠性.