AP1000稳压器波动管竖直管段空气-水CCFL实验研究

使用竖直管代替波动管模型开展稳压器波动管竖直管段内空气-水两相逆流限制（CCFL）特性可视化实验研究。实验现象表明:竖直管与上容器接口处的局部CCFL决定了进入竖直管内的液相流量；竖直管内的局部CCFL决定了从竖直管流出的液相流量；两处局部CCFL均随空气流量的增大而增强。在较低气量情况，进入竖直管内的液相能够完全或大部分流出，竖直管内的局部CCFL较弱，上容器和竖直管接口处的局部CCFL在整体CCFL中占主导地位，整体CCFL程度随着上容器液位升高而略有增强。在高气量情况，从上容器进入竖直管的液相大部分或者完全被限制而不能向下流出，竖直管内的局部CCFL强烈，在整体CCFL中占主导地位，整体CCFL特性不受上容器液位变化的影响。通过实验数据拟合得到了新的稳压器竖直管CCFL模型。稳压器波动管CCFL数据和稳压器竖直管CCFL数据基本重合，表明波动管CCFL主要由CCFL-U决定。      

IRIS/AP型电感耦合等离子体光谱仪激发光源常见故障分析

本文介绍IRIS/AP型ICP的激发光源(炬管),并较为全面地阐述和分析其不能正常激发点燃的常见故障及其原因。     

AMBE-1000声码器接口电路设计方法

DVSI公司的AMBE-1000声码器芯片是一款高性能的全双工、实时语音压缩编解码芯片,可以应用于卫星通信、保密通信、视频会议等领域.文中简要介绍AMBE-1000声码器的A/D-D/A接口以及信道接口的工作原理;结合实例分别给出了AMBE-1000声码器与PCM编解码器MC14LC5480的A/D-D/A接口电路、与单片机AT89C51的信道接口电路的设计方法;最后指出了电路设计中应该注意的问题.     

基于AMBE-1000的双路语音采集系统的设计

介绍了一种基于专用语音编码/解码芯片AMBE-1000的双路语音采集系统,并给出了详细的硬件电路设计方法和软件流程.     

Simulation of the VVER-1000 pump start-up experiment of the OECD V1000CT benchmark with CATHARE and TRAC-PF1

In the framework of joint effort between the Nuclear Energy Agency (NEA) of OECD, the United States Department of Energy (US DOE), and the Commissariat a l'Energie Atomique (CEA), France a coupled three-dimensional (3D) thermal-hydraulics/neutron kinetics benchmark for VVER-1000 was defined. The benchmark consists of calculation of a pump start-up experiment labelled V1000CT-1 (Phase 1), as well as a vessel mixing experiment and main steam line break (MSLB) transient labelled V1000CT-2 (Phase 2), respectively. The reference nuclear plant is Kozloduy-6 in Bulgaria. The overall objective is to assess computer codes used in the analysis of VVER-1000 reactivity transients. A specific objective is to assess the vessel mixing models used in system codes. Plant data are available for code validation consisting of one experiment of pump start-up (V1000CT-1) and one experiment of steam generator isolation (V1000CT-2). The validated codes can be used to calculate asymmetric MSLB transients involving similar mixing patterns. This paper summarizes a comparison of CATHARE and TRAC-PF1 system code results for V1000CT-1, Exercise 1, which is a full plant point kinetics simulation of a reactor coolant system (RCS) pump start-up experiment. The reference plant data include integral and sector average parameters. The comparison is made from the point of view of vessel mixing and full system simulation. CATHARE used a six-sector multiple 1D vessel thermal-hydraulic model with cross flows and TRAC used a six-sector, 18-channel coarse-mesh 3D vessel model. Good agreement in terms of integral parameters and inter-loop mixing is observed.     

武钢 10000 m3/h制氧机主冷泄漏故障处理及应急保产方式

氧气生产单位保用户用气一旦出现较为紧张的局面时，如何正确处理保安全生产运行、保用户生产、安排抢修时间三者之间的关系，值得关注与研究。     

NCP1000系列单片开关电源的原理与应用

NCP1000是美国安森美 (Onsemi)半导体公司开发的一大批单片开关电源集成电路新产品系列中的一种 ,可用于为办公自动化设备、消费类产品及工业电子产品提供简单、经济的开关电源系统设计方案。文中介绍了NCP1000单片开关电源的主要特点、工作原理及应用电路     

Utilization of STEP AP 210 at The Boeing Company

Boeing has been working on the development and implementation of STEP AP 210 since its inception. Using a combination of internally funded activities, external government contracts and multi-company pilots, Boeing has developed prototype tools to utilize AP 210 and is poised to move these tools into production. This paper begins with a brief overview of STEP and AP 210. The status of available AP 210 vendor translators (data generators), along with viewers and analysis programs (data consumers) is covered. Discussion continues with present and planned usage of AP 210 in several companies with the primary emphasis on implementation at The Boeing Company. The document concludes with a summary of key points.     

GC–MS characterization of oligomers in polyadipates used as plasticizers for PVC in food contact

Fourteen commercial polyadipates and a polysebacate were analysed for their components of a molecular mass below 1000 Da, primarily with the aim of generating the background data for measuring the migration of this type of polymeric additives from plasticized PVC (e.g. cling films and gaskets of lids) into foods or food simulants. Since the composition of the material <1000 Da varies between the polyadipates, the main components must be identified to enable a correct quantification. Polyadipates differ in the diol used as linker, their termination (acid or alcohol) and in the end‐capping (free alcohols, acetylation, acylation with fatty acids, esterification with octanol/decanol). Gas chromatography (GC) provides good separation, but the material remaining in the column up to high temperatures decomposes and forms a hump in the rear part of the chromatogram. Examples of mass spectra are shown, the most indicative fragments pointed out and spectra of 159 components listed. The polyadipates and the sebacate are characterized by their structure, the main components <1000 Da and the fraction of material <1000 Da. Copyright © 2006 John Wiley & Sons, Ltd.