IAEA推荐的操作干预水平OIL1和OIL2缺省值的导出及其适宜性的初步研究

本文简要介绍了操作干预水平(OIL)的概念、应用和IAEA建议的缺省值及其导出方法，运用有代表性的美国《反应堆安全研究》的事故源项和法国严重事故源项(S1，S2，S3)，着重研究了压水堆事故下OIL缺省值导出假定的两个参数R1(总有效剂量率和烟羽外照射剂量率的比值)、R2(甲状腺剂量率和烟羽外照射剂量率的比值)数值的合理性。初步研究表明，对所研究的事故类型，平均来说，R1、R2参数取值和相应的OIL1、OIL2缺省值是适宜的；但对不同事故类型计算得出的OIL与其缺省值存在一定的偏差。相对事故源项来说，事故天气条件以及距离对R1、R2的影响较小(PWR1-PWR7中R1、E2的数值随距离变化的最大值约为最小值的2倍；而在大气稳定度类别为A、D和F这三类气象条件下，PWR1-PWR6平均的R1、R2数值与缺省值假定计算条件设定值的最大偏差大约为50％)。因此，在实际应急响应中运用OIL缺省值时，需要进行修正或重新计算。     

语义Web语言DAML＋OIL及其应用初探

1.引言 1.1 产品信息集成的现状和面临的局限产品信息描述格式的不统一使得传统CIMS之间产品信息不能共享,数据交换产生障碍。STEP标准及其EXPRESS语言统一了产品信息的建模标准和数据结构,使得产品信息由原来的机器不可读(machine-unreadable)变为机器可读(machine-readable),从而在数据格式上解决了产品信息的共享和交换问题。但是,分布、开放、动态的计算环境,使得企业内部及企业     

本体在信息交换中的建模方法

详细介绍了目前最先进的Web本体语言DAML OIJ及相关技术，最后以Java语言为例说明建立一个本体的方法。     

面向语义Web的软件模式的描述

软件模式用于捕捉开发面向对象软件的经验，可以被复用。文中分析了应用XML，RDF（S）和DAML＋OIL三者描述软件模式的区别，并提出应用DAML＋OIL来描述软件模式以及软件模式之间的关系，使软件模式的描述具有精确的语义，从而使计算机可以理解Web上的软件模式，为以后研究基于语义Web和具有推理能力的搜索奠定了基础。     

Improvement of polyurethane adhesion to glass using novolac primer

The adhesion of polyurethane (PU) coatings based on toluene diisocyanate, poly(propylene glycol) (PPG) 2000, polyethylene adipate (PEA) 2000 and castor oil (CO) was studied. The coatings were applied to glass slides with and without novolac primer (due to the high functionality of castor oil, the resultant PU coatings have limited shelf life). Our studies showed that satisfactory adhesion strengths were achievable for immediate bonding. Furthermore, our study also found that the adhesion of polyurethane to glass surfaces was increased by using a thin layer of novolac primer.     

Molecular Transport of Aromatic Solvents through Oil Palm Micro Fiber Filled Natural Rubber Composites: Role of Fiber Content and Interface Adhesion on Transport

Cellulose micro fiber reinforced natural rubber composites were prepared and the diffusion and transport of aromatic solvents through these composites were studied in the temperature range 30–70°C. The diffusion parameters were investigated with special reference to the effect of fiber loading, penetrant size, temperature and interphase adhesion. The effect of chemical treatments on solvent uptake was also analyzed. The transport coefficients such as diffusion, permeation and sorption coefficients were determined to evaluate the influence of interphase adhesion on transport properties. The van't Hoff relationship was used to determine the thermodynamic parameters. The first order kinetic rate constant was evaluated. Finally, experimental results of the sorption properties of the composites were compared with theoretical predictions.     

用DAML+OIL进行装配规划领域知识表示方法研究

随着知识库建模技术的发展,原有的知识表示方法已经不能满足实际应用的要求,在新的建模方法基础上应用DAML+OIL本体语言表示装配规划领域知识库。首先,采用CommonKADS方法构建知识库模型,然后利用DAML+OIL本体语言表示知识库。深入讨论了如何采用DAML+OIL本体语言对装配规划领域(面向对象的方法建模)内的对象、类和关系进行描述,并给出了虚接触产生规则表示方法实例。     

论我国油脂工业入世后发展战略基础

文章论述了我国油脂工业的现实情况，入世后油脂工业产品所处的竞争形势，急需改变这种不利的状态。从分析我国油料资源生产情况，提出主要资源为菜籽、大豆、花生、棉籽和向日葵籽。立足于五种油料资源生产食用植物油脂产品，我们需要建设100多座现代化大型油脂综合企业、采用微机控制，高新技术系统控制下进行生产，获得优质、多品种产品，节约能源和物资消耗，产品成本低。     

Research of the Thermal and Strength Properties for Materials Obtained with Sunflower Oil

The use of pulverized fly ash (PFA) obtained from thermal power plants and epoxidized sunflower oil (ESFO) as recycled material in the construction industry was investigated. Epoxidized sunflower oil, clay (C) and pulverized fly ash were mixed at various proportions and were fired at 160, 180 and 200°C. The thermal conductivity and strength (compressive strength, tensile strength and abrasion loss) of the samples were determinated. The lowest value of thermal conductivity, 0.25 W/mK, was measured for the sample with a 70% FA/30% C ratio and 50% ESFO processed at 200°C. This sample had the lowest compressivetensile strength (3.28 MPa–0.633 MPa) and the highest abrasion loss (4.39%). The highest compressivetensile strengths and the lowest value of abrasion loss observed, were 7.21 MPa–0.939 MPa and 1.15%, respectively.     

基于语义Web的组件描述方法

分析了分别基于XML，RDF(S)，DAML-OIL三者描述组件之间区别，提出采用DAMH OIL的方法来描述组件以及组件之间的关系．使组件具有精确的语义，并且为以后基于语义和具有推理能力的搜索奠定了基础。最后简要介绍了分别基于这3种方法组件的搜索原理。