Microbial susceptibility of various polymers and evaluation of thermoplastic elastomers with antimicrobial additives

The incursion of microbial growth on polymeric products can deteriorate their performance and lead to the development of undesirable staining and odors. A growing trend in the industry has aimed to reduce microbial populations on high-touch surfaces via the use of antimicrobials to protect material aesthetics and durability or to prevent the spread of pathogenic microorganisms. In this study, a variety of plastic substrates (30 unique polymer compounds), including poly(acrylonitrile-co-butadiene-co-styrene), poly(butylene terephthalate), poly(etherimide), various thermoplastic elastomers (TPEs), poly(carbonates), and poly(amides), were screened for susceptibility to microbial attack using American Society for Testing and Materials (ASTM) G21 (fungi susceptibility), Japanese Industrial Standard (JIS) Z2801, and modified ASTM E1428-15a (bacterial susceptibility) test standards. TPEs were determined to be most susceptible to microbial attack under the appropriate environmental conditions. Subsequent studies assessed the use of an antimicrobial additive, zinc pyrithione (ZPT), for potential efficacy in a variety of TPE blends for diverse target market applications. ZPT proved to be very effective in protecting TPEs, reducing Staphylococcus aureus and Escherichia coli populations by 99.9% or more in JIS Z2801 testing and inhibiting fungal growth (rating = 0) according to the ASTM G21 standard.     

柿竹园多金属矿选矿废水处理试验研究

针对柿竹园多金属矿选矿废水量大、难沉降、pH值高、COD高等特点,研究了石灰沉降+ZJYH03氧化法、石灰沉降+漂白粉氧化法、石灰沉降+NaClO氧化法、聚合硫酸铁沉降+ZJYH03氧化法和石灰沉降+生物氧化法等废水处理工艺,并对比分析了各工艺的处理效果和药剂成本,结果表明: 聚合硫酸铁沉降+ZJYH03氧化法取得了较好的处理效果,该方法具有工艺简单、水质无色透明、药剂成本低等特点。     

生物预处理技术在天然产物提取中的应用研究进展

生物预处理技术运用于天然产物提取是借助微生物或生物酶的作用，在适当条件下对天然资源进行处理，破坏植物原料的细胞壁，促进天然产物释放到提取介质中，以提高分离效率，有助于保证天然产物活性。生物预处理技术按形式可以分为微生物发酵技术和生物酶处理技术。针对2种生物预处理技术的作用机制和应用进行综述，旨在为天然产物开发利用提供参考。     

蓝莓溃疡病生防链霉菌CX3的抑菌效果及其鉴定

[目的]为了明确从吉林省长白山保护区池西保护站马鞍山云杉人工林林下土壤分离,所获得1株拮抗菌株(编号记为CX3)的生防效果及分类地位。[方法]分别采用平板对峙法和杯碟法测定该菌株活菌及其发酵液的抑菌活性和抑菌谱;并通过形态学、生理生化特征、16S rRNA序列分析等方法研究了其分类地位。[结果]该菌株对13种供试植物病原菌均有抑制作用,抑菌谱广,其中对蓝莓溃疡病菌有极强的抑制作用,抑菌带达25.91 mm,发酵液的抑菌圈直径达31.73 mm;根据其菌株形态、生理生化特性、16S rRNA序列比对,最终鉴定菌株为链霉菌属Streptomyces sp.。[结论]该菌株对蓝莓溃疡病菌有显著的抑制效果,应用开发前景良好,此次是国内首次报道该菌株杀真菌活性。     

Sparse non-convex Lp regularization for cone-beam X-ray luminescence computed tomography

Cone-beam X-ray luminescence computed tomography (CB-XLCT) is an attractive hybrid imaging modality, and it has the potential of monitoring the metabolic processes of nanophosphors-based drugs in vivo. However, the XLCT imaging suffers from a severe ill-posed problem. In this work, a sparse nonconvex L_p (0?p?L₁ regularization. Further, an iteratively reweighted split augmented lagrangian shrinkage algorithm (IRW_SALSA-L_p) was proposed to efficiently solve the non-convex L_p (0?p?p-values (1/16, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8) in both 3D digital mouse experiments and in vivo experiments. The results demonstrate that the proposed non-convex methods outperform L₂ and L₁ regularization in accurately recovering sparse targets in CB-XLCT. And among all the non-convex p-values, our L_p(1/4?p?相似文献   

温度对生物净化滤柱中氨氮、铁、锰去除效果的影响

温度是生物净化滤柱运行的一个重要参数，采用生物净化滤柱处理模拟含氨氮、铁、锰地下水，考察水温从约25℃降到约6℃过程中氨氮、铁、锰的去除效果。结果表明，出水氨氮、总铁、锰的浓度分别低于0.15mg/L、0.1mg/L、0.05mg/L，均低于国家标准。出水总铁、锰均未受到水温下降的影响，但是出水氨氮浓度逐渐从约0.02mg/L升高到约0.12mg/L。进一步分析发现，铁主要在滤层的0~0.4m段去除，去除效果没有受到水温变化的影响。氨氮、锰主要在滤层的0~0.8m段去除，其沿程浓度均随水温降低而明显升高。氨氮、锰的生物去除符合一级动力学反应，水温为24.6℃、15.3℃、6.7℃时，两者的动力学常数k分别为0.154min^-1、0.186min^-1，0.143min^-1、0.175min^-1，0.103min^-1、0.163min^-1；半反应时间t_1/2分别为4.51min、3.72min，4.83min、3.96min，6.72min、4.24min。随着试验水温的降低，氨氮、锰的去除效果明显受到影响。     

面向二十一世纪的生物农药

简述了农药的发展经历，介绍了国内外生物农药的研究、发展和应用的现状及发展趋势。     

Failure analysis of a broken tooth

Several days after heart surgery, a patient discovered his upper right canine tooth had broken at the root. Such tooth damage, recognized post-operatively, is usually assumed to be caused by blunt mechanical force from an instrument used by the anesthesiologist during placement of a breathing tube at the start of surgery. In this case, the patient had saved the crown portion of the broken tooth, and it was possible to examine the root fracture characteristics. The curvature and direction of the crack path and natural tooth situation suggested that failure could be described through a cantilever beam model. This was confirmed when a whole extracted sample tooth was embedded and broken by a measured force in a manner consistent with the model. The resulting fracture surface matched that of the patient’s broken canine tooth. However, the high load and force direction necessary to fracture the root was inconsistent with forces applied during the anesthesia procedure. The failure analysis and further investigation indicated tooth clenching on the breathing tube during recovery was the likely cause of fracture. This paper presents an alternate explanation for intubation-related dental injury, demonstrates the practicality of fractographic analysis of biological materials, and introduces a methodology for simulating in vitro tooth settings for mechanical testing.     

回转升降生物接触工艺的实验研究

提出了一种具有特殊运转方式的新型RBC系统－－回转升降生物接触工艺，对回转升降生物接触工艺的工作原理和工艺特征进行了论述。并通过动态实验，对回转升降生物接触工艺小型实验装置的性能和效果进行了初步考察。