超临界机组发生FAC的因素及相互关系分析

为了减轻因流动加速腐蚀(FAC)引起的锅炉结垢加速、汽水系统管道厚度减小甚至爆裂现象，对超临界机组发生流动加速腐蚀的机理及其主要影响因素进行了研究，并讨论了管壁内表面粗糙度、蒸汽含汽率、pH值、溶氧量对FAC的影响，以及温度与pH值、温度与流速、pH值与溶解氧量、溶解氧量与氢电导率等影响因素之间的相互作用关系，最后结合实际电厂的运行数据验证了分析结果。研究表明：减小工质流速、管壁粗糙度和氢电导率，增大给水的pH值和溶解氧含量可以使FAC的腐蚀速率减小，超临界加氧处理时pH值应在8.9～9.2之间，溶解氧量范围为45～100μg/L,氢电导率的期望值在0.1μS/cm以下。由于各影响因素之间的作用十分复杂，本文只给出了大致范围和趋势，并未给出准确数据。     

农村综合能源系统多层协同优化运行方法

农村综合能源系统通过多种能源的协同互补,在满足农村用户多元化用能需求的同时,能有效提升能源利用效率和用能经济性。首先,在考虑适应农村典型场景的基础上,提出了一种三层协同自律的农村综合能源分层协同运行优化框架。然后,基于农村综合能源系统典型设备,建立了三层农村综合能源系统源-储-荷联合优化调度模型以及相应的优化调度流程。调度模型中冬季通过对沼气发电机组的余热回收与空气源热泵协同对用户供热;夏季对沼气发电机组余热进行回收,并通过溴化锂制冷机与空气源热泵联合对农村用户供冷。最后,对农村综合能源系统多层协同优化方法进行了算例分析,结果表明该优化方法提高了农村居民用能的经济性,验证了所提方法的有效性。     

A new method for extrapolating the load-displacement response of drilled shaft foundations for interpretation of side capacity

In this study, the side capacity of drilled shaft foundations is estimated from partially-mobilized load–displacement field data using a new method in the extrapolation of load–displacement response. A dataset of 138 bi-directional load tests is used to evaluate the degree of mobilization of unit side resistance. A total of 612 unit side-resistance curves obtained from measured strain gauge recordings are utilized in this study. The proposed extrapolation approach is based on a new technique, the Double Tangent method, characterizing the extent of mobilization for each unit side-resistance curve. Roughly, 12% of the dataset exhibits a fully-mobilized load–displacement response, with the remainder exhibiting varying degrees of a partially-mobilized response. Fully-mobilized records are further characterized using the Double Tangent method over different ranges of mobilization, resulting in four regression models based on predominant soil types. Each model is assessed statistically, and a global regression model is found suitable to predict maximum unit side resistance. The global model is further validated using two independent load test datasets, comparing measured values of unit side resistance against predicted values. The model is then used to predict maximum unit side resistance for all partially-mobilized data within the dataset, and the results are compared to two extrapolation techniques currently used in practice. The corresponding resistance-displacement response is extrapolated using a proposed asymptotic curve-fitting function for side resistance, and an example extrapolation is illustrated to showcase how the proposed method can be used in engineering practice.     

Sequential alignment attention model for scene text recognition

Scene text recognition has been a hot research topic in computer vision due to its various applications. The state-of-the-art solutions usually depend on the attention-based encoder-decoder framework that learns the mapping between input images and output sequences in a purely data-driven way. Unfortunately, there often exists severe misalignment between feature areas and text labels in real-world scenarios. To address this problem, this paper proposes a sequential alignment attention model to enhance the alignment between input images and output character sequences. In this model, an attention gated recurrent unit (AGRU) is first devised to distinguish the text and background regions, and further extract the localized features focusing on sequential text regions. Furthermore, CTC guided decoding strategy is integrated into the popular attention-based decoder, which not only helps to boost the convergence of the training but also enhances the well-aligned sequence recognition. Extensive experiments on various benchmarks, including the IIIT5k, SVT, and ICDAR datasets, show that our method substantially outperforms the state-of-the-art methods.     

汉语谐音与语义双关语的认知神经加工差异——ERP证据

该文运用事件相关电位技术,观测汉语谐音双关语与语义双关语两者是否存在认知神经加工上的差异。结果发现,语义双关语的正确率明显低于谐音双关语以及不符合逻辑语篇的正确率。谐音双关语组、语义双关语组和不合逻辑语篇引发的脑电波数据在300～900ms之间存在显著差异。其中,语义双关语和不合逻辑语篇都引发了N400效应。脑电波形图和脑电波地形图显示,前者引发的N400效应略微晚于后者引发的N400效应,但数据统计的结果不显著。在600～900ms,谐音双关语引发了P600效应。研究由此推论: 汉语谐音双关语与语义双关语认知层面的加工差异与双关语的呈现形式和表达效果密切相关。     

Benchmark value determination of energy efficiency indexes for coal-fired power units based on data mining methods

The operational optimisation of coal-fired power units is important for saving energy and reducing losses in the electric power industry. One of the key issues is how to determine the benchmark values of the energy efficiency indexes of the units. Therefore, a new framework for determining these benchmark values is proposed, based on data mining methods. First, the energy efficiency key performance indicators (KPIs) associated with the net coal consumption rate (NCCR) were selected based on the domain knowledge. Second, the decision-making samples with minimal NCCR were acquired with the fuzzy C-means (FCM) clustering algorithm, and the corresponding clustering centres were employed as the benchmark values. Finally, based on the support vector regression (SVR) algorithm, the target values of the NCCR were obtained with the KPIs as input, and the energy saving potential was evaluated by comparing the target values with the historical values of the NCCR. An actual on-duty 1000 MW unit was taken as study unit, and the results show that the energy saving potential is remarkable when the operators adjust the KPIs based on the calculated benchmark values.     

固态13C-NMR法表征渣油沥青质的结构组成

以长庆常压渣油、胜利减压渣油和加拿大减压渣油为原料，研究了正庚烷沥青质的结构及组成，根据固态13C NMR分析结果，计算了沥青质分子的平均结构单元参数，并模拟出了沥青质的结构单元模型。结果表明，沥青质分子由4个左右的结构单元组成，每个结构单元包括5～7个缩合芳香环。沥青质中的饱和碳以环烷碳为主，并包含少量的短烷基侧链，沥青质的n(HS)/n(CS)在16左右。对于平均相对分子质量较大、具有较短烷基侧链和较少取代基的沥青质分子，由核磁共振氢谱计算其结构参数时，采用重油计算过程的假设--芳香环烷基侧链上α位及β位和β位以远的氢/碳比为2(x=y=2)是不合理的，可能会导致计算结果与沥青质的真实结构存在较大的误差。     

Revisiting CO2 emissions convergence in G18 countries

This study revisits whether CO₂ emissions converge in G18 countries over the period of 1950–2013. To work on this empirical analysis, we employ a more powerful quantile unit root test with per capita CO₂ emissions. While conventional unit root tests fail to reject convergence in CO₂ emissions in these G18 countries, quantile unit root test results demonstrate CO₂ emissions converged in 5 of these G18 countries (i.e., Australia, Brazil, Canada, Germany, and India). Our empirical results have important policy implications for the governments of G18 countries to direct efficient and effective energy policies to reduce the CO₂ emissions.     

移相全桥变换器在电动汽车充电单元中的应用

分析了峰值电流控制模式下移相全桥变换器的工作原理,设计了电动汽车充电单元的串联双闭环控制器。该控制器外环主回路实时获取负载电压与输入参考电压之间的偏差,通过输入PID电压环对输出电压进行调节,其内环副回路实时计算原边控制电流与PID电压环控制输出的偏差,通过输入PID电流环对控制电流进行调节。针对当控制输入信号占空比大于50%后峰值电流变换器系统出现不稳定的问题,设计了一种斜坡补偿方法,并以PIC16F887单片机为核心,开发了一套电动汽车充电控制单元。实验结果表明,所设计的充电控制单元可以满足电动汽车的充电要求,并具有可靠性高、动态响应快、补偿网络易实现以及带宽增益较高等优点。     

基于英飞凌TC275的整车控制器CCP协议底层驱动开发

针对以英飞凌TC275单片机为平台的整车控制器,进行控制器局域网络标定协议(controller area network calibration protocol,CCP)底层驱动程序的开发。依据CCP的需求开发了英飞凌TC275的控制器局域网络(controller area network,CAN)模块、系统定时器(system timer,STM)模块和FLASH模块的底层驱动程序,实现CCP标定系统的通信连接、数据上传、数据下载、数据存储等功能。为验证系统的性能,进行整车控制器的实际测试,测试结果表明:所开发的基于TC275单片机的CCP底层驱动程序能够实现CCP的功能要求。