LDD方法在提高电路工作电压中的应用研究

研究了利用轻掺杂漏结构来制作高电源电压器件的工艺方法。分析了ＬＤＤ结构参数对器件击穿特性的影响，并结合实验结果对Ｎ＾－区的注入剂量，长度及引入的串联电阻进行了优化设计。     

低掺杂浓度Nd:YVO4激光器的输出特性研究

在对Nd:YVO_4晶体的掺杂浓度和晶体长度对激光器性能的影响进行了分析后,报道了利用掺杂浓度为0.3at％,通光长度为10mm的Nd:YVO_4晶体作为增益介质,带光纤耦合的激光二极管端面抽运的Nd:YVO_4激光器。在抽运功率为27.365W时,获得了14.85W的TEM_(00)模输出,光一光转换效率为60.49％,斜效率达64.5％。     

镨掺杂分布对1.3μm光纤放大器特性影响

对掺氟化镨玻璃光纤放大器的小信号增益，用广义的高斯近似公式可获得精确的分析表达。文中研究了限制光纤芯层中央部分的镨掺杂对光纤放大器特性的影响，结果发现限制镨掺杂分布能改进光纤放大器的工作效率，且截止波长比芯层全部均匀掺镨的光纤更长。     

Production of silver‐doped analcime by isomorphous substitution technique

BACKGROUND: Metal‐exchanged zeolites have been reported to have significant limitations on cayalytic activity, such as counterbalancing the negative framework charges and limitation of active space. Alternative methods of incorporating silver ions into the framework of zeolites are therefore necessary. This paper reports on a technique for producing silver doped analcime by isomorphous substitution of silver ion into the framework of analcime. The amount of aluminium in the gel composition was reduced by a factor of 5%, 10% and 20% and an equivalent amount of silver was added to the gel and treated in a conventional manner for zeolite crystallisation. Some of the aluminium in the reaction gel was replaced with the silver. The silver‐doped analcime samples where characterised by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐rays (EDX), Fourier transform infrared (FTIR) spectroscopy and inductively coupled plasma‐atomic emission spectroscopy (ICP‐AES) analysis. RESULTS: The amount of silver ions loaded for each reduction of aluminium as determined by EDX were found to be (w/w) 0.29%, 1.41% and 2.10%, respectively. XRD pattern SEM images of the silver‐doped analcime showed the presence of zeolite P in addition to analcime. CONCLUSION: Silver‐doped analcime was successfully produced with different silver loadings and may exhibit higher anti‐microbial activities than silver‐exchanged counterparts. Copyright © 2008 Society of Chemical Industry     

热分解法制备钛酸铅镧薄膜及其电性能研究

本文研究了用金属有机物热发解法制备ＰＬＴ８薄膜的工艺过程和基片对薄膜结构的影响，并且给出了铁电性能的测量结果。     

带有光放大的波分复用技术在光纤通信中的应用

本文论述了波分复用技术的优点及其应用；介绍了波分复用技术与光纤放大器相结合后的发展概况２；评述了波分复用技术发展中的主要问题及其在当前实用系统中的解决方案和今后的发展方向。     

Holmium-doped Porous Silicon Prepared by a New Electrochemical Approach and Its Photoluminescence

Ｐｏｒｏｕｓｓｉｌｉｃｏｎ（ＰＳ）ｗａｓｆｏｕｎｄｔｏｅｍｉｔｖｉｓｉｂｌｅｌｕｍｉｎｅｓｃｅｎｃｅａｔｒｏｏｍｔｅｍｐｅｒａｔｕｒｅｂｙＣａｎｈａｍｉｎ１９９０［１］．Ｔｈｉｓｐｈｅｎｏｍｅｎｏｎｉｍｐｌｉｅｄａｐｏｔｅｎｔｉａｌａｐｐｌｉｃａｔｉ...     

不同Li/Nb摩尔比In∶Fe∶LiNbO_3晶体的生长及其光学性能

在Li NbO3(LN)中掺摩尔分数为1%的In和掺质量分数为0.03%的Fe,用提拉法技术生长具有不同n(Li)/n(Nb)[n(Li)/n(Nb)=0.94,1.05,1.20,1.38]的In∶Fe∶LN晶体。测试不同n(Li)/n(Nb)的In∶Fe∶LN晶体的吸收光谱、抗光致散射能力和指数增益系数,并计算晶体的有效载流子浓度。结果表明晶体样品随着n(Li)/n(Nb)增加,吸收光谱的吸收边发生紫移,抗光致散射能力增加,指数增益系数和有效载流子浓度增大。采用n(Li)/n(Nb)=1.38的In∶Fe∶LN晶体作记录介质,n(Li)/n(Nb)=1.05的In∶Fe∶LN晶体作位相共轭镜进行全息关联存储实验。实验表明存储系统具有实时处理,成像质量好,信噪比高和能反复使用等优点。     

Synergistic effects of doped Fe3+ and deposited Au on improving the photocatalytic activity of TiO2

Fe³⁺ doped together with Au deposited TiO₂ (Au/Fe³⁺–TiO₂) was successfully prepared, which shows excellent photocatalytic activity for degradation of methyl orange (MO) under both UV and visible light (λ > 420 nm) illumination. Fe³⁺ has been confirmed by EPR to substitute for Ti⁴⁺ in the TiO₂ lattice, and Au exists as Au⁰ on the surface of the photocatalyst indicated by the results of XRD. Fe³⁺ and Au have synergistic effects on improving the photocatalytic activity of TiO₂. A proposed mechanism concerning the synergistic effects is discussed to explain the improvement of the photocatalytic activities.     

硫化镉微晶掺杂玻璃及薄膜的制备与光学性能的研究

用溶胶－凝胶法制备了硫化镉微晶掺杂玻璃和薄膜材料，使用了三种不同的方法引入所需的Ｓ＾２－离子，通过Ｘ射线和透射电镜等实验手段，分析了微晶结构显微相，标定出晶体确为ＣｄＳ，并测得微晶的尺寸。从室温吸收光谱上观察到吸收截止边随着ＣｄＯ掺杂凝胶在１５０℃时通Ｈ２Ｓ气体时间的延长（１－８ｈ）而移向长波方向，从而确定其为量子尺寸效应的实验依据。在Ｎｄ：ＹＡＧ强激光光场的作用下，薄膜样品中观察到二次谐波信号，