Application of artificial neural network method to predict the breakage properties of PGE bearing chromite ore

In the present investigation, systematic grinding experiments were conducted in a laboratory ball mill to determine the breakage properties of low-grade PGE bearing chromite ore. The population balance modeling technique was used to study the breakage parameters such as primary breakage distribution (B_{i, j}) and the specific rates of breakage (S_i). The breakage and selection function values were determined for six feed sizes. The results stated that the breakage follows the first-order grinding kinetics for all the feed sizes. It was observed that the coarser feed sizes exhibit higher selection function values than the finer feed size. Further, an artificial neural network was used to predict breakage characteristics of low-grade PGE bearing chromite ore. The predicted results obtained from the neural network modeling were close to the experimental results with a correlation of determination R² = 0.99 for both product size and selection function.     

溢流型球磨机进料口密封装置的改进

分析了溢流型球磨机进料口矿浆泄漏的原因以及泄漏后给球磨机润滑系统和环境所带来的危害。通过对溢流型球磨机进料口密封装置的改进,减少和杜绝了矿浆泄漏,改善了球磨机运行环境,延长了润滑油使用周期、提高了球磨机有效作业率,降低了球磨机运行成本。     

600 MW电站锅炉中印尼褐煤掺烧试验及数值模拟

为减少锅炉掺烧印尼褐煤发生的燃烧及制粉系统问题,提高锅炉掺烧印尼褐煤安全运行水平,在某600MW四角切向燃烧的电站锅炉中,通过现场试验与数值模拟的两种方法,选取锅炉运行的各种典型工况,研究了印尼褐煤投运方式、掺烧比例对燃烧的影响,同时分析了磨煤机研磨褐煤时对其性能参数的影响。研究表明:相比下部燃烧器投运印尼褐煤,采用中部或上部燃烧器投运褐煤方式时,炉顶烟气温度更接近锅炉设计运行工况;相比印尼褐煤30%、70%掺烧比例,50%掺烧比例更有利于燃烧器区域燃料燃烧的稳定性;磨煤机研磨褐煤时,在风煤比例为2.3~3.0时,可控制一次风温度大于55℃,磨煤机运行安全稳定。     

Paper mill sludge as a renewable substrate for the production of acetone-butanol-ethanol using Clostridium sporogenes NCIM 2337

In the present study, pre-treated paper mill sludge (PMS) was evaluated extensively as a substrate for production of acetone-butanol-ethanol using Clostridium sporogenes NCIM 2337. The PMS was subjected to three types of pre-treatment methods namely alkali, mechanical, and thermal treatment and was analyzed by SEM. The pre-treatment of PMS by alkali was observed to be more effective over the other pre-treatment methods. The alkali pre-treated sludge was then made to undergo fermentation, which showed the conventional process of acidogenesis followed by solventogenesis. The acetone, butanol, and ethanol concentration for 15% alkali pre-treated PMS was estimated to be maximum.     

高压辊磨+搅拌磨在某复杂难选铁矿石选别工艺中的优越性研究

为了验证在某复杂难选铁矿石的选矿工艺中，应用高压辊磨机和立式搅拌磨的优越性，进行了一系列对比试验。结果表明，与颚式破碎机相比，高压辊磨机产品的粉矿率更高，产品的可磨性更好；与球磨机相比，立式搅拌磨机细磨效率更高、效果更好，相同磨矿细度下，立式搅拌磨机磨矿产品的解离度更高，磁选铁精矿品位也更高；高压辊磨+立式搅拌磨在处理复杂难选铁矿石方面具有显著的优势。     

轧机垂直系统动力学参数辨识

 针对轧机垂直系统动力学参数可信度不足等问题，提出一种基于实测数据的改进粒子群算法辨识轧机垂直系统动力学参数的方法。首先,将轧机垂直系统刚度和阻尼考虑成达芬振子和范德波尔振子，构建轧机垂直系统非线性动力学模型，并对粒子群算法进行改进；然后，通过数值仿真算例辨识得到系统在感染噪声和不含噪声时的动力学参数，验证了该算法的有效性；最后，以现场某轧机垂直系统为研究对象，基于现场实测数据，应用该算法进行辨识，得到了轧机垂直系统动力学参数估计，通过实测位移、速度和加速度信号分别与辨识后的位移、速度和加速度信号进行对比，证明该方法辨识轧机垂直系统动力学参数结果可靠，具有一定的工程应用价值。     

轧机两侧刚度差的数字化分析与改善措施

轧机两侧刚度差是轧机功能精度的最重要指标之一，以弹跳方程为基础定量计算了轧机两侧刚度差对轧制稳定性的影响，主要包括调平值、调平值随轧制力的变化以及甩尾3个方面。以此为基础在某热轧线建立了轧机刚度评价体系，对轧机功能精度进行管控。同时，还分析了轧机两侧刚度差的影响因素，并在定量分析的基础上采取了一系列的改善措施，包括衬板、垫片维护、最大压靠轧制力和标定轧制力的调整等，使轧机刚度和轧制稳定性得到大幅提升。     

高能球磨-粉末冶金法制备硫化亚铁/铁基轴承材料的摩擦学性能

以Fe、C和FeS为原料，采用高能球磨工艺和粉末冶金法制备了FeS/铁基轴承材料，研究了材料的微观结构，并考察了其摩擦磨损性能。结果表明：高能球磨工艺改善了FeS颗粒的分布均匀性及其与基体的界面结合，材料力学性能高于未球磨材料；FeS属固体润滑剂且具有良好的储油特性，油润滑条件下FeS向摩擦表面转移易形成液-固润滑膜，起到了良好的减摩抗黏着作用，FeS质量分数为8%的球磨铁基轴承材料具有较好的减摩耐磨特性和较高的承载能力。     

In-situ methane enrichment of biogas from anaerobic digestion of palm oil mill effluent by addition of zero valent iron (ZVI)

Palm oil mill effluent (POME) is a wastewater effluent that is generated from palm oil milling. Treatment of POME, especially using biological treatment methods, is a challenge as it contains high amounts of organic and sulfur compounds, and it is highly acidic. In this research, the effects of zero-valent iron (ZVI) on the enhancement of methane production from POME via anaerobic digestion were investigated. Furthermore, to identify the reactor operation modes that were suitable for the addition of ZVI, anaerobic digestion of POME was tested in three reaction configurations: batch reactor, fed-batch reactor, and continuous stirred-tank reactor (CSTR). In the batch mode, where acidic POME was fed with 16 g/L of ZVI dose just once, methane production increased by 74%. However, as the oxidation of ZVI under anaerobic conditions led to the production of hydroxyl ions, the pH of the medium continuously increased from approximately 7 to 9, which is not suitable for methanogenesis. In the fed-batch mode that involved intermittent feeding of acidic POME, the pH of the culture media was maintained at 6.8. This is because the extra hydroxyl ions generated from the oxidation reaction of ZVI tended to neutralize the acids in the feeding substrate. In addition, ZVI promoted the production of methane from POME and increased the average methane content in biogas from 62% to 76%. In the CSTR mode, which involved continuous feeding of acidic POME, ZVI increased methane production by 86% (from 1.79 to 3.32 L/day), methane content in biogas from 60 to 75%, and total chemical oxygen demand (tCOD) removal efficiency from 78 to 89 to 88–95%. Thus, the addition of ZVI can be a potential strategy for in-situ methane enrichment of biogas by anaerobic digestion of POME. This is because ZVI acts as a buffer for acid generation and provides extra electrons, ferrous ions, and ferric ions, which promote key microbial activities in the anaerobic digestion process.     

磁铁尾矿与石灰石双掺生产优质水泥

受环保压力影响，西乡公司生产水泥用河道淤沙供应紧张，难以满足生产需求且价格上涨幅度较大，严重影响到水泥生产及成本，我们开展了磁铁尾矿在水泥中的应用研究工作，通过连续几个月的生产实践，对物料配比优化，磨机技术改造，实现利用磁铁尾矿与石灰石双掺解决混合材紧缺问题，降低了水泥生产成本，水泥质量及性能稳定。