Effect of the thicknesses of the Al2SiO5 ion conductor on the opto-electrical properties for all-solid electrochromic devices

In this study, an all-solid-state electrochromic device (ECD) with the structure of ITO/WO₃/Al₂SiO₅/NiO_x/ITO was prepared, and the effect of the Al₂SiO₅ solid electrolyte thicknesses on the opto-electrical performance was investigated. The microstructure and surface morphology were characterized using XRD, SEM and AFM, and the surface morphology and degree of surface looseness demonstrate a significant influence on the opto-electrical properties of ECDs. The charge transfer dynamics at the solid-solid interface were characterized using EIS to obtain an ionic conductivity of 4.637 × 10^-8 S/cm. CV, CA and UV–Visible spectra were employed to record the in situ electrochemical and optical properties. The results revealed that the highest optical modulation was 44.58%, the coloring and bleaching times were 14.8 s and 3.7 s, and the highest coloring efficiency was 98.17 cm²/C, which indicates that excellent opto-electrical properties were obtained. When the thickness increases, the degree of surface dense morphology transforms, and the loose morphology is more favorable for ion conductivity, which improves the opto-electrical properties. The results in this study provide insights into the understanding of Al³⁺-based all-solid-state ECDs, which promote the exploration of new types of Al³⁺ ionic conductors for all-solid-state ECDs.     

Rapid synthesis of garnet-type Li7La3Zr2O12 solid electrolyte with superior electrochemical performance

Li₇La₃Zr₂O₁₂-based garnet-type solid electrolytes are promising candidates for use in all-solid-state lithium batteries (ASSLBs). However, their potential in large-scale commercial applications is largely hindered by the time/energy-consuming and lithium-wasting synthetic method which typically needs a long-duration high temperature solid state reaction process. Herein we invent a fast preparation route that involves a short-period thermal reaction (1100 °C for 10 min) in laboratory muffle furnaces following by conventional hot pressing technique to get almost fully dense (Al, Ga, Ta, Nb)-doped garnet-type electrolytes with high phase purity (>99.9 %). The large and compact grains, low porosity and high phase purities of garnet ceramic electrolytes synthesized in this study ensure superior electrochemical performance. Particularly, Ga-doped cubic Li₇La₃Zr₂O₁₂ shows extremely low E_a values (0.17?0.18 eV) and record-high lithium ionic conductivities (>2 × 10^?3 S cm^-1 at 25 °C).     

A novel utilized method of tar derived from biomass gasification for fabricating binder-free all-solid-state hybrid supercapacitors

As an industrial pollutant, tar derived from biomass gasification is used as the precursor for fabricating a novel carbon-metal hydroxides composite electrode. A slurry (the mixture of tar, KOH and melamine) is daubed uniformly onto the nickel foam, which is directly carbonized to form NPC@LDH electrode material. This electrode is further coated with NiCo-LDH nanosheets using an electrodeposition method to form NF@NPC@LDH. The newly made NF@NPC@LDH electrode exhibits a high specific capacity of 9.6 F cm⁻² at a current density of 2 mA cm⁻² and good rate performance (55.3% retention). Furthermore, a hybrid NF@NPC@LDH//NF@PC all-solid-state supercapacitor is fabricated, and the device exhibits high energy density of 1.28 mWh cm⁻³ at a power density of 8.04 mW cm⁻³, low resistance and good cycling stability.     

Accumulation of Cu(II) cations in poly(3,4-ethylenedioxythiophene) films doped by hexacyanoferrate anions and its application in Cu-selective electrodes with PVC based membranes

Electrochemical properties of poly(3,4-ethylenedioxythiophene) doped with hexacyanoferrate(II,III) ions (PEDOT(HCF)) were studied in the presence of Cu²⁺ ions. Voltammetric and EDAX studies revealed retention of hexacyanoferrate anions in the polymer film and accumulation of Cu(II) cations, as well as formation of solid copper hexacyanoferrate near the polymer surface.Accumulation of Cu²⁺ ions was found to be advantageous from the point of view of PEDOT(HCF) applications as a solid contact (ion-to-electron transducer) in all-solid-state Cu²⁺-selective electrodes with solvent polymeric polyvinyl chloride (PVC) based membrane, containing Cu²⁺-selective ionophore. Binding of Cu²⁺ ions in the conducting polymer layer results in analyte ions flux into the transducer phase. Thus, pronounced enhancement of selectivity of the all-solid-state Cu²⁺-selective electrode or lower detection limit of the potentiometric response range was achieved, reaching under optimised conditions 10⁻⁷ M CuSO₄.     

Spatiotemporal mapping of microscopic strains and defects to reveal Li-dendrite-induced failure in all-solid-state batteries

Solid-state electrolytes (SSEs) are key to the success and reliability of all-solid-state lithium batteries, potentially enabling improvements in terms of safety and energy density over state-of-the-art lithium-ion batteries. However, there are several critical challenges to their implementation, including the interfacial instability stemming from the dynamic interaction of as-formed dendritic lithium during cycling. For this work, we emphasize the importance of studying the spatial distribution and temporal evolution of strains and defects in crystalline solid-state electrolytes at the micro-scale, and how this affects dendrite growth. A proof-of-principle study is demonstrated using the synchrotron radiation based micro Laue X-ray diffraction method, and a custom-developed in-situ cycling device. Defects and residual strains are mapped, and the evolution of intragranular misorientation is observed. The feasibility of using this technique is discussed, and recommendations for micro-strain engineering to address the Li/SSEs interfacial issues are given. Also, work directions are pointed out with the consideration of combining multi-techniques for “poly-therapy”.     

Amorphous LiCoO2 thin films on Li1+x+yAlxTi2−xSiyP3−yO12 prepared by radio frequency magnetron sputtering for all-solid-state Li-ion batteries

Amorphous LiCoO₂ thin films were deposited on the NASICON-type glass ceramics, Li_1+x+yAl_xTi_2−xSi_yP_3−yO₁₂ (LATSP), by radio frequency (RF) magnetron sputtering below 180 °C. The as-deposited LiCoO₂ thin films were characterized by X-ray diffraction, scanning electron microscopy and atomic force microscope. All-solid-state Li/PEO₁₈-Li (CF₃SO₂)₂N/LATSP/LiCoO₂/Au cells were fabricated using the amorphous film. The electrochemical performance of the cells was investigated by galvanostatic cycling, cyclic voltammetry, potentiostatic intermittent titration technique and electrochemical impedance spectroscopy. It was found that the amorphous LiCoO₂ thin film shows a promising electrochemical performance, making it a potential application in microbatteries for microelectronic devices.     

LiAlO2-coated LiNi0.8Co0.1Mn0.1O2 and chlorine-rich argyrodite enabling high-performance all-solid-state lithium batteries at suitable stack pressure

All-solid-state lithium batteries (ASSLBs), which are consisted of Li_5.5PS_4.5Cl_1.5 electrolyte, metal lithium anode and LiNi_0.8Mn_0.1Co_0.1O₂ (NCM811) cathode, are speculated as a promising next generation energy storage system. However, the unstable oxide cathode/sulfide-based electrolyte interface and the dendrite formation in sulfide electrolyte using the lithium metal anode hinder severely commercialization of the ASSLBs. In this work, the dendrite formation in sulfide electrolyte is investigated in lithium symmetric cell by varying the stack pressure (3, 6, 12, 24 MPa) during uniaxial pressing, and uniformly nanosized LiAlO₂ buffer layer was carefully coated on NCM811 electrode (LiAlO₂@NCM811) to improve the cathode/electrolyte interface stability. The result shows that lithium symmetrical cell has a steady voltage evolution over 400 h under 6 MPa stacking pressure, and the assembled LiAlO₂@NCM811/Li_5.5PS_4.5Cl_1.5/Li battery under the stack pressure of 6 MPa exhibits large initial discharge specific capacity and excellent cycling stability at 0.05 C and 25 °C. The feasibility of using the lithium metal anode in all-solid-state batteries (ASSBs) under suitable stack pressure combined with uniformly nanosized LiAlO₂ buffer layer coated on NCM811 electrode supply a facile and effective measures for constructing ASSLBs with high energy density and high safety.     

Ionophores in polymeric membranes for selective ion recognition; impedance studies

Synthetic calix[4]arene-crown ionophores for selective Na⁺ (ionophore L1) and Cs⁺-ions (ionophore L2) recognition find application in ion-selective membrane electrodes (ISE) for analytical purpose. Selectivity coefficients for the electrodes with compounds L1 and L2 are  = −2.6 and  = −2.4, respectively. Electrodes of two different construction: all-solid-state (ASS) (with conducting polymer layer on glassy carbon or platinum as ion-to-electron transducer) and conventional ion-selective electrode (ISE) (with liquid electrolyte and Ag/AgCl) are presented and their properties and lifetime are being compared. Resistance of PVC membrane with ionophores L1 and L2 were within the range 0.15-1.4 MΩ depending on the type of the outer electrolyte and its concentration. Conductivity of the membranes was in the range 0.7 × 10⁻⁸ to 6 × 10⁻⁸ Ω⁻¹ cm⁻¹. Warburg coefficients σ were within 0.16 × 10⁴ to 12.7 × 10⁴ Ω s^−1/2, dielectric constant values ? were in a range 28-60 depending mainly on the type of plasticizer.     

Influences of poly(ether urethane) introduction on poly(ethylene oxide) based polymer electrolyte for solvent-free dye-sensitized solar cells

A poly(ether urethane) (PEUR)/poly(ethylene oxide) (PEO)/SiO₂ based nanocomposite polymer is prepared and employed in the construction of high efficiency all-solid-state dye-sensitized nanocrystalline solar cells. The introduction of low-molecular weight PEUR prepolymer into PEO electrolyte has greatly enhance the electrolyte performance by both improving the interfacial contact properties of electrode/electrolyte and decreasing the PEO crystallization, which were confirmed by XRD and SEM characteristics. The effects of polymer composition, nano SiO₂ content on the ionic conductivity and I₃⁻ ions diffusion of polymer-blend electrolyte are investigated. The optimized composition yields an energy conversion efficiency of 3.71% under irradiation by white light (100 mW cm⁻²).     

Modeling the Electrical Conductive Paths within All-Solid-State Battery Electrodes

All-solid-state batteries constitute a very promising energy storage device. Two very important properties of these battery cells are the ionic and the electrical conductivity, which describe the ion and the electron transport through the electrodes, respectively. In this work, a numerical method is presented to model the electrical conductivity, considering the outcome of discrete-element method simulations and the intrinsic conductivities of both the active material particles and the conductive additive particles. The results are calibrated and validated with the help of experimental data of real manufactured electrodes. The tortuosity, which strongly influences the ionic conductivity, is also presented for the analyzed electrodes, taking their microstructure into account.