Biosorption of chromium (VI) from aqueous solution by seed powder of prickly pear (Opuntia ficus indica L.) fruits

ABSTRACT

The solid residue of the cold press oil extraction from prickly pear (Opuntia ficus indica L.) fruit seeds was evaluated as a low-cost biosorbent for biosorption of Cr(VI) from aqueous solutions. Batch experiments were conducted as a function of initial pH, contact time, biosorbent dose, initial Cr(VI) concentration, and temperature. Biosorption was highly pH-dependent and found to be maximum at pH 1.0. Langmuir and Freundlich equations fitted very well with experimental data. The maximum monolayer adsorption capacity was 19.61 mg/g at 298 K and pH 1.0. Biosorption kinetics was controlled by the pseudo-second-order model. Thermodynamic parameters indicated that biosorption of Cr(VI) was a spontaneous, favorable and endothermic process. The activation energy was found to be 40.68 kJ.mol^?1.     

Biosorbents based on pine sawdust and malt sprouts for preconcentration and ICP-OES determination of nonferrous,heavy, and precious metals in the environmental samples

Pine sawdust and malt sprouts modified with orthophosphoric acid and carbamide have been proposed for solid-phase extraction (SPE) of nonferrous, heavy, and precious metals and their subsequent determination in the environmental samples by inductively coupled plasma optical emission spectrometry (ICP-OES). Modified adsorbents were characterized by SEM, TGA, and FT-IR and compared with native matrixes. SPE of some nonferrous and precious metal ions by biosorbents was studied. Depending on the SPE conditions, it was possible to separate nonferrous and heavy metals from alkali and alkaline earth metals. The proposed adsorbents are effective for preconcentration of nonferrous and heavy metals from natural waters and precious metals from solutions after digestion of geological samples.     

重金属废水处理方法研究进展

随着我国经济的快速发展,工业废水大量排放,使得水体重金属污染日益严重,而重金属同时又是重要的资源,如何将其从水体中分离回收,是当前环境保护领域研究的热点之一。目前,水体重金属污染的处理方法主要有化学法、物理法和生物法。本文综述了近年来重金属废水处理方法的研究进展,并对该类研究进行了展望。     

Continuous-flow metal biosorption in a regenerable Sargassum column

Metal biosorption behavior of raw seaweed S. filipendula in ten consecutive sorption-desorption cycles has been investigated in a packed-bed flow-through column during a continuous removal of copper from a 35mg/L aqueous solution at pH 5. The elutant used was a 1% (w/v) CaCl2/HCl-solution at pH 3. The sorption and desorption was carried out for an average of 85 and 15h, respectively, representing more than 41 days of continuous use of the biosorbent. The weight loss of biomass after this time was 21.6%. The Cu-biosorption capacity of the biomass, based on the initial dry weight, remained relatively constant at approximately 38 mg Cu/g. Loss of sorption performance was indicated by a shortening breakthrough time and a broadening mass-transfer zone. The column service time, considered up to 1 mg Cu/L in the effluent, decreased continuously from 25.4 h for the first to 12.7 h for the last cycle. The critical bed length, representing the mass-transfer zone, increased almost linearly from 28 to 34cm. "Life-factors" for S. filipendula were found to be 0.0008h(-1) for the breakthrough time and 0.008cm/h for the critical bed length, using an exponential decay and linear fitting functions, respectively. Regeneration with CaCl2/HCl at pH 3 provided elution efficiencies up to 100%. Maximum concentration factors were determined to be in the range 16-44, a decreasing tendency was observed with an increasing exposure time.     

微生物固定化吸附剂吸附Pd(II)的研究

微生物法在吸附处理重金属污染和回收贵金属方面具有广阔的发展前景。利用载体A固定化大肠杆菌开发了一种高效微生物固定化吸附剂,研究其对Pd(II)的吸附特性,构建其对Pd(II)的动态吸附模型,并开展了循环再生实验。结果表明,吸附柱的穿透时间和耗竭时间与大肠杆菌的浓度、微生物固定化吸附剂的填充量成正相关,与溶液流速成负相关;载体A:粘结剂:大肠杆菌的质量比为4:1:3,固定化吸附剂添加量为15 g、溶液流速3 mL/min时,吸附柱对Pd(II)有较好的吸附效率,穿透时间和耗竭时间分别为60 min和360 min;使用2 mol/L的HCl对负载Pd(II)后吸附剂进行解吸处理,解吸率达到99.32%;吸附-解吸循环5次后,固定化吸附剂对Pd(II)的吸附量基本保持不变。     

Remediation of Cd(II) Metal Ion from Aqueous Systems by Using Calcium Alginate Modified (CAM) Acacia saligna and Delbergia sisso Pods Composite Beads

The present investigation reports the possibility of using Acacia saligna and Delbergia sisso pods to remove Cd(II) from aquatic systems in the form of calcium alginate modified immobilized composite beads (CAM-ASPCB and CAM-DSPCB). Batch and fixed bed column studies were carried out under various process affecting parameters. Maximum metal removal efficiency of 92% by CAM-ASPCB and 85% by CAM-DSPCB was observed under optimized conditions. Pseudo-second-order kinetic model, intra-particle diffusion, and Freundlich isotherm were found fitted well. The regeneration of the sorbents were found effectively high showing up to 10 cycles for simulated solution and up to 3 cycles for industrial effluent.     

A Comparative Study on the Biosorption of Cd2+ onto Paecilomyces lilacinus XLA and Mucoromycote sp. XLC

The filamentous fungi XLA and XLC isolated from Cd-contaminated soil were identified morphologically and phylogenetically as Paecilomyces lilacinus and Mucoromycote sp., respectively. The minimum inhibitory concentrations (MICs) of Cd²⁺, Co²⁺, Cu²⁺, Zn²⁺, Cr³⁺ and Cr⁶⁺ in minimum mineral (MM) medium agar plates were 29,786, 2945, 9425, 5080, 1785 and 204 mg·L⁻¹ for XLA and 11,240, 884, 9100, 2540, 3060 and 51 mg·L⁻¹ for XLC, respectively. Favorable biosorption conditions for adsorption of Cd²⁺ by the tested fungi were investigated. Efficient performances of the biosorbents were described using Langmuir isotherm model, and the predicted maximum biosorption capacities for Cd²⁺ were 77.61 mg·g⁻¹ of XLA and 79.67 mg·g⁻¹of XLC. Experiments on desorption potential of biosorbents validated their efficacy at a large scale. Results showed that XLA obtained a desorption rate of 84.7% by 2% EDTA and XLC gained a desorption rate of 78.9% by 0.1 M HCl. Analysis by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) and X-ray photoelectron spectroscopy (XPS) suggested that groups of C–N, COO– for XLA and C–N, CH₂ and phosphate for XLC were the dominant binding sites for Cd²⁺ biosorption. Our results indicated that the fungus XLA, rather than XLC, could potentially be used as an inexpensive, eco-friendly and effective bioremediation agent for the removal of Cd²⁺ from wastewater.     

Biosorption of Acid Red P-2BX by lichens as low-cost biosorbents

The aim of this study is to examine the dye biosorption properties of lichen species called Cladonia convoluta and Evernia prunastri. Since lichens are extensively found in the environment, their suitability as a cheap adsorbent has been investigated in this study. The optimal parameters for textile dye biosorption were also determined. The dried lichen biomass showed better dye biosorption capacity than ash lichen biomass. C. convoluta had better dye biosorption capacity than E. prunastri. Dye biosorption rate was found as 71.41% at optimal conditions. This study concluded that C. convoluta was a successful and cheap biosorbent for treatment of water contaminated by Acid Red P-2BX dye.     

Banana peel: an effective biosorbent for aflatoxins

This work reports the application of banana peel as a novel bioadsorbent for in vitro removal of five mycotoxins (aflatoxins (AFB1, AFB2, AFG1, AFG2) and ochratoxin A). The effect of operational parameters including initial pH, adsorbent dose, contact time and temperature were studied in batch adsorption experiments. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pH_pzc) analysis were used to characterise the adsorbent material. Aflatoxins’ adsorption equilibrium was achieved in 15 min, with highest adsorption at alkaline pH (6–8), while ochratoxin has not shown any significant adsorption due to surface charge repulsion. The experimental equilibrium data were tested by Langmuir, Freundlich and Hill isotherms. The Langmuir isotherm was found to be the best fitted model for aflatoxins, and the maximum monolayer coverage (Q₀) was determined to be 8.4, 9.5, 0.4 and 1.1 ng mg^?1 for AFB1, AFB2, AFG1 and AFG2 respectively. Thermodynamic parameters including changes in free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the four aflatoxins. Free energy change and enthalpy change demonstrated that the adsorption process was exothermic and spontaneous. Adsorption and desorption study at different pH further demonstrated that the sorption of toxins was strong enough to sustain pH changes that would be experienced in the gastrointestinal tract. This study suggests that biosorption of aflatoxins by dried banana peel may be an effective low-cost decontamination method for incorporation in animal feed diets.