Examining the Impact of Squaric Acid as a Crosslinking Agent on the Properties of Chitosan-Based Films

Hydrogels based on chitosan are very versatile materials which can be used for tissue engineering as well as in controlled drug delivery systems. One of the methods for obtaining a chitosan-based hydrogel is crosslinking by applying different components. The objective of the present study was to obtain a series of new crosslinked chitosan-based films by means of solvent casting method. Squaric acid—3,4-dihydroxy-3-cyclobutene-1,2-dione—was used as a safe crosslinking agent. The effect of the squaric acid on the structural, mechanical, thermal, and swelling properties of the formed films was determined. It was established that the addition of the squaric acid significantly improved Young’s modulus, tensile strength, and thermal stability of the obtained materials. Moreover, it should be stressed that the samples consisting of chitosan and squaric acid were characterized by a higher swelling than pure chitosan. The detailed characterization proved that squaric acid could be used as a new effective crosslinking agent.     

Preparation of magnetic zeolite/chitosan composite using silane as modifier for adsorption of Cr(VI) from aqueous solutions

This study aimed to prepare an efficient, cost-effective, and separable magnetic zeolite/chitosan composite (MZFA/CS) adsorbent from solid waste to deal with the water pollution of Cr(VI). The MZFA/CS was characterized by X-ray fluorescence (XRF), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and vibrating sample magnetometer (VSM) techniques. Then, the effect of pH, temperature, initial concentration of Cr(VI) ions, and contact time was considered in the study. For a sorbent dose of 0.1 g in 50 mL of a Cr(VI) solution, at a contact time of 30 min, temperature of 30°C, and a pH of 3, an adsorption capacity (q_e) of 16.96 mg g⁻¹ was achieved. Adsorption kinetics and isotherm data obtained for all adsorption systems were well-fitted by pseudo-second-order and Langmuir models, respectively. The thermodynamic study suggested that the adsorption process is spontaneous and endothermic in nature. In summary, the adsorbent with better separability (Ms = 16.83 emu g⁻¹) and adsorbability was successfully fabricated.     

Biomimetic Lamellar Chitosan Scaffold for Soft Gingival Tissue Regeneration

Mucogingival surgery has become a common procedure for soft gingival tissue reparation in dental clinical practice, which mainly relies on autograft or commercial collagen membranes (CM). However, the autograft faces grand challenges in source availability and long-term post-surgery pain management, and the CM is restricted by its poor mechanical properties in an aqueous environment. Here, it is reported that a bio-inspired lamellar chitosan scaffold (LCS) with long range ordered porous structure, manufactured through a bidirectional freezing method, can serve as a promising gingival tissue engineering material. The LCS not only exhibits excellent mechanical properties in the hydrated state but also accelerates vessel formation and soft tissue regeneration in vivo. Most interestingly, the LCS is found to be capable of inducing macrophage differentiation to M2 macrophages, which is thought to play an important role in tissue regeneration. These advantages combined with its easy and low-cost preparation process make the LCS a promising candidate for dental clinical applications.     

Influence of Glycerophosphate Salt Solubility on the Gelation Mechanism of Colloidal Chitosan Systems

Recently, thermosensitive chitosan systems have attracted the interest of many researchers due to their growing application potential. Nevertheless, the mechanism of the sol-gel phase transition is still being discussed, and the glycerophosphate salt role is ambiguous. The aim of the work is to analyze the possibility of the exclusive use of a non-sodium glycerophosphate salt and to determine its impact on the gelation conditions determined by rheological and turbidimetric measurements as well as the stability of the systems by measuring changes in the Zeta potential value. It was found that ensuring the same proportions of glycerophosphate ions differing in cation to amino groups present in chitosan chains, leads to obtaining systems significantly different in viscoelastic properties and phase transition conditions. It was clearly shown that the systems with the calcium glycerophosphate, the insoluble form of which may constitute additional aggregation nuclei, undergo the gelation the fastest. The use of magnesium glycerophosphate salt delays the gelation due to the heat-induced dissolution of the salt. Thus, it was unequivocally demonstrated that the formulation of the gelation mechanism of thermosensitive chitosan systems based solely on the concentration of glycerophosphate without discussing its type is incorrect.     

Development and in vitro characterization of chitosan-coated polymeric nanoparticles for oral delivery and sustained release of the immunosuppressant drug mycophenolate mofetil

Objective: To develop an oral sustained release formulation of mycophenolate mofetil (MMF) for once-daily dosing, using chitosan-coated polylactic acid (PLA) or poly(lactic-co-glycolic) acid (PLGA) nanoparticles. The role of polymer molecular weight (MW) and drug to polymer ratio in encapsulation efficiency (EE) and release from the nanoparticles was explored in vitro.

Methods: Nanoparticles were prepared by a single emulsion solvent evaporation method where MMF was encapsulated with PLGA or PLA at various polymer MW and drug: polymer ratios. Subsequently, chitosan was added to create coated cationic particles, also at several chitosan MW grades and drug: polymer ratios. All the formulations were evaluated for mean diameter and polydispersity, EE as well as in vitro drug release. Differential scanning calorimetry (DSC), surface morphology, and in vitro mucin binding of the nanoparticles were performed for further characterization.

Results: Two lead formulations comprise MMF: high MW, PLA: medium MW chitosan 1:7:7 (w/w/w), and MMF: high MW, PLGA: high MW chitosan 1:7:7 (w/w/w), which had high EE (94.34% and 75.44%, respectively) and sustained drug release over 12?h with a minimal burst phase. DSC experiments revealed an amorphous form of MMF in the nanoparticle formulations. The surface morphology of the MMF NP showed spherical nanoparticles with minimal visible porosity. The potential for mucoadhesiveness was assessed by changes in zeta potential after incubation of the nanoparticles in mucin.

Conclusion: Two chitosan-coated nanoparticles formulations of MMF had high EE and a desirable sustained drug release profile in the effort to design a once-daily dosage form for MMF.     

Chitosan Microspheres as Carriers for pH‐Indicating Species in Corrosion Sensing

Chitosan microspheres containing bromocresol green, cresol red, and phenolphthalein for corrosion detection, through pH change, are synthesized in order to be used in protective coatings for aluminium alloys. Microspheres containing corrosion detection species are characterized morphologically (SEM) and physico‐chemically (FTIR, TGA). Release studies (UV–vis) are performed in corrosion‐promoting conditions (pH, NaCl), and detection studies by immersion in media associated with corrosion activity while microspheres' sensing activity is evaluated visually. Electrochemical characterization of AA2024 substrates in the presence of chitosan spheres is performed to understand material performance, and a color change is observed as a result of local pH increase in cathodic areas when corrosion takes place. These findings can be correlated with the results from release studies and seem a promising approach for corrosion sensing purposes, not only because pH increase is possible to detect due to corrosion, but also because chitosan is considered an environmentally friendly material.     

壳聚糖改性聚乳酸的阻燃性能分析

为解决聚乳酸(PLA)易燃、熔滴等问题,以绿色天然高聚物壳聚糖为原料,采用甲磺酸、五氧化二磷、三聚氰胺对其改性,得到了一种绿色环保型阻燃剂———MPCS,与三聚氰胺聚磷酸盐(MPP)复配,形成了膨胀型阻燃剂(IFR)。将IFR、α-磷酸锆(α-ZrP)和PLA用转矩流动仪熔融共混制备了阻燃聚乳酸复合材料。采用傅立叶红外光谱(FT-IR)、X射线粉末衍射(XRD)对MPCS的结构进行了表征;用垂直燃烧法(UL-94)、锥形量热测试(CCT)、热重分析(TGA)及电子扫描电镜(SEM)研究了聚乳酸复合材料的阻燃性能及其阻燃机理。结果表明,当添加3%α-ZrP和22%IFR时,PLA复合材料的阻燃性能达到UL-94V-0级且无熔融滴落;由于α-ZrP具有片层阻隔作用和催化成炭作用,α-ZrP能提高PLA/IFR复合材料的阻燃效果,降低热释放量和烟密度。     

Reproducible,biocompatible medical materials from biologically derived polysaccharides: Processing and Characterization

Natural polysaccharides like chitosan and dextran have garnered considerable interest in biomedical applications due to their biocompatibility, biodegradability, and nontoxicity. Nonetheless, the development of a reproducible class of medical devices from these materials is challenging and has had limited success. Chitosan and dextran are inherently variable and synthesis using these materials is prone to inconsistencies. In this study, we put forward a robust product development regimen that allows these natural materials to be developed into a reproducible class of biomaterials. First, an array of validated characterization methods (Proton Nuclear Magnetic Resonance, titrations, Ultraviolet spectroscopy, Size Exclusion Chromatography—Multi-Angle Light Scattering, Size Exclusion Chromatography—Refractive Index, and proprietary methods) were developed that allowed rigorous specifications to be set for unprocessed chitosan and dextran, chitosan and dextran intermediates, and chemically modified materials—acrylated chitosan (aCHN) and oxidized dextran (oDEX). Second, a robust and reproducible synthesis scheme involving various in-process controls was developed to chemically modify the unprocessed polysaccharides. Third, purification methods to remove byproducts and low-molecular-weight impurities for both aCHN and oDEX were developed. The study presents a viable strategy for converting variable, natural materials into a reproducible class of biomaterials that can be applied in various biomedical applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48454.     

Synthesis of pH-responsive isolated soy protein/carboxymethyl chitosan microspheres for sustained pesticide release

In order to improve the utilization rate of avermectin (AVM), a complex was prepared by electrostatic self-assembly using isolated soy protein (ISP) and carboxymethyl chitosan (CMCS) for loading AVM to obtain ISP/CMCS@AVM microspheres. The encapsulation efficiency (EE), sustained release property, ultraviolet (UV) protective ability, and toxicity of the microspheres were evaluated, and the release kinetics of AVM from the microsphere at different pHs were investigated. The results demonstrated that the average particle size of ISP/CMCS@AVM was 283.95 nm, and the EE reached 88.42% for AVM after denaturation. After 70 h of exposure to UV light, the residual rate of AVM in ISP/CMCS@AVM was 78.12%, which was significantly higher than 35.18% in the AVM emulsion. Moreover, the formulation imparted pH sensitivity and sustained-release property to AVM and was consistent with the Korsmeyer–Peppas model, controlled by Fick diffusion. Finally, the insecticidal toxicity of ISP/CMCS@AVM did not differ significantly from that of unmodified AVM. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48358.