热定形对并列复合再生聚酯短纤维性能的影响

以再生聚酯瓶片料和泡料混合料为原料进行并列复合纺丝,并经后纺工艺处理得到并列复合再生聚酯短纤维。通过对纤维进行干热定形,研究热定形温度、时间对并列复合再生聚酯短纤的强伸性能、卷曲性能和热收缩性能的影响。结果表明:聚酯短纤维的断裂强度和断裂伸长率随着热定形温度升高而增大;断裂强度随热定形时间的延长逐渐下降,断裂伸长率先增大后减小,在20 min时达到最大值,为17.4%,声速取向因子则随着热定形时间的延长呈现下降趋势。纤维的卷曲性能随着热定形温度的升高而改善,较短的时间内,纤维的卷曲性能已经达到最佳;热定形温度的升高使纤维的热收缩率增大;并列复合再生聚酯短纤维的最佳热定形温度是140～160℃,最佳定形时间为10 min。     

Structural Cues for Understanding eEF1A2 Moonlighting

Spontaneous mutations in the EEF1A2 gene cause epilepsy and severe neurological disabilities in children. The crystal structure of eEF1A2 protein purified from rabbit skeletal muscle reveals a post-translationally modified dimer that provides information about the sites of interaction with numerous binding partners, including itself, and maps these mutations onto the dimer and tetramer interfaces. The spatial locations of the side chain carboxylates of Glu301 and Glu374, to which phosphatidylethanolamine is uniquely attached via an amide bond, define the anchoring points of eEF1A2 to cellular membranes and interorganellar membrane contact sites. Additional bioinformatic and molecular modeling results provide novel structural insight into the demonstrated binding of eEF1A2 to SH3 domains, the common MAPK docking groove, filamentous actin, and phosphatidylinositol-4 kinase IIIβ. In this new light, the role of eEF1A2 as an ancient, multifaceted, and articulated G protein at the crossroads of autophagy, oncogenesis and viral replication appears very distant from the “canonical” one of delivering aminoacyl-tRNAs to the ribosome that has dominated the scene and much of the thinking for many decades.     

高伸长率冷轧双相钢DP980显微组织及性能

摘要：为了进一步提高冷轧双相钢DP980的强塑性，采用低C-Si-Mn-Nb-Cr成分，通过调整连续退火工艺参数，系统研究了工艺组织性能的关系，利用OM、SEM、EBSD分析了不同退火温度条件下各相的比例、尺寸、形貌、分布，同时利用力学拉伸试验手段研究了连退两相区退火温度对强塑性的影响。结果表明，通过优化调整连续退火工艺，不仅可以在冷轧铁素体和马氏体双相钢的组织上获得少量的残余奥氏体，也能细化再结晶晶粒，最终获得ReL/Rm≤0.5、高伸长率A50≥15%的冷轧DP980，提高强塑性的同时改善了成型性能。     

高温除尘滤料性能检测及对比分析

针对工业除尘(燃煤电厂除尘为主)常用玻璃纤维、PPS纤维(聚苯硫醚)、丙烯腈共聚体纤维(亚克力)、聚酯纤维(涤纶)等4种材质的环保除尘滤料产品进行了测试分析,主要包括单位面积质量、透气率、断裂强力、断裂伸长率、连续工作温度下强力保持率、热收缩率、酸碱处理后断裂强力保持率、静态除尘效率等技术参数。结果表明:大多数滤料的单位面积质量超过800 g/m^2,最高为1253 g/m^2;滤料的透气率基本为2~5 m^3/(m^2·min);不同滤料的静态除尘效率最低为99.79%,最高达99.95%;酸碱处理后的测试结果表明滤料具有较好的耐酸腐蚀性,瞬时工作温度及连续工作温度24 h的断裂强力保持率满足技术要求且具有稳定的热收缩率。测试结果可为工业用户选择滤料提供依据。     

双相区加速冷却处理对X80管线钢组织与性能的影响

采用双相区加速冷却法(加速冷却始冷温度为700 ℃)对X80管线钢进行热处理,获得了贝氏体和铁素体(B+F)双相组织。然后通过组织表征、力学性能测试以及在3.5wt%NaCl溶液中的耐蚀性进行研究。结果表明:热处理后获得的管线钢组织由板条状贝氏体、多边形铁素体及少量马氏体/奥氏体岛组成。与热处理前相比,(B+F)双相管线钢屈强比较低,为0.65,初始加工硬化指数为0.31,均匀伸长率达8.3%,塑性显著提升;双相组织中含有52.4%的铁素体,因而耐腐蚀性明显提高。通过双相区加速冷却法获得的(B+F)两相组织在塑变过程中发生协调变形,可以适应大变形的需求,同时耐蚀性优异,为大变形管线钢实际生产提供一定的借鉴。     

拉深筋对板材变形特征和力学性能的影响研究

采用实验方法将金属板材拉过不同尺寸的拉深筋镶块，分析了拉深筋高度、圆角半径以及过筋次数对板材变形特征的影响规律，研究了过筋产生的预应变对板材后续力学性能的影响规律。结果表明：板材流过拉深筋后，流动方向上发生均匀的拉伸变形；过筋产生的预应变随着拉深筋高度增大而增大，随着圆角半径增大而减小，随着过筋次数增加而近似线性增大；预应变越大，材料后续屈服强度和抗拉强度越高，但后续延伸率越小，总延伸率随着预应变增大表现出先减小后增大的趋势。     

The effect of exogenous glucose infusion on early embryonic development in lactating dairy cows

The objective of this study was to examine the effect of intravenous infusion of glucose on early embryonic development in lactating dairy cows. Nonpregnant, lactating dairy cows (n = 12) were enrolled in the study (276 ± 17 d in milk). On d 7 after a synchronized estrus, cows were randomly assigned to receive an intravenous infusion of either 750 g/d of exogenous glucose (GLUC; 78 mL/h of 40% glucose wt/vol) or saline (CTRL; 78 mL/h of 0.9% saline solution). The infusion period lasted 7 d and cows were confined to metabolism stalls for the duration of the study. Coincident with the commencement of the infusion on d 7 after estrus, 15 in vitro-produced grade 1 blastocysts were transferred into the uterine horn ipsilateral to the corpus luteum. All animals were slaughtered on d 14 to recover conceptuses, uterine fluid, and endometrial tissue. Glucose infusion increased circulating glucose concentrations (4.70 ± 0.12 vs. 4.15 ± 0.12 mmol/L) but did not affect milk production or dry matter intake. Circulating β-hydroxybutyrate concentrations were decreased (0.51 ± 0.01 vs. 0.70 ± 0.01 mmol/L for GLUC vs. CTRL, respectively) but plasma fatty acids, progesterone, and insulin concentrations were unaffected by treatment. Treatment did not affect either uterine lumen fluid glucose concentration or the mRNA abundance of specific glucose transporters in the endometrium. Mean conceptus length, width, and area on d 14 were reduced in the GLUC treatment compared with the CTRL treatment. A greater proportion of embryos in the CTRL group had elongated to all length cut-off measurements between 11 and 20 mm (measured in 1-mm increments) compared with the GLUC treatment. In conclusion, infusion of glucose into lactating dairy cows from d 7 to d 14 post-estrus during the critical period of conceptus elongation had an adverse impact on early embryonic development.     

并条工艺参数对纤维取向和条干质量的影响

并条机工艺提高纤维的取向度和条干均匀度。纤维取向影响棉条的强伸性能。研究了并条机断条牵伸、并条、送丝速度对纤维取向、条干均匀度、强力和延伸率的影响。