Total Site Hydrogen Integration with fresh hydrogen of multiple quality and waste hydrogen recovery in refineries

This paper proposes a novel method combining Pinch Methodology and waste hydrogen recovery, aiming to minimise fresh hydrogen consumption and waste hydrogen discharge. The method of multiple-level resource Pinch Analysis is extended to the level of Total Site Hydrogen Integration by considering fresh hydrogen sources with various quality. Waste hydrogen after Total Site Integration is further regenerated. The technical feasibility and economy of the various purification approaches are considered, demonstrated with a case study of a refinery hydrogen network in a petrochemical industrial park. The results showed that fresh hydrogen usage and waste hydrogen discharge could be reduced by 21.3% and 67.6%. The hydrogen recovery ratio is 95.2%. It has significant economic benefits and a short payback period for Total Site Hydrogen Integration with waste hydrogen purification. The proposed method facilitates the reuse of waste hydrogen before the purification process that incurs an additional environmental footprint. In line with the Circular Economy principles, hydrogen resource is retained in the system as long as possible before discharge.     

Analysis of predictor equations for determining the blast-induced vibration in rock blasting

The paper proposes a new empirical correlation designed to complement the “site laws” currently used to evaluate the attenuation in the rock masses of vibrations induced by rock blasting. The formula contains a deformed exponential known as the K-exponential, which seems to well represent a large number of both natural and artificial phenomena ranging from astrophysics to quantum mechanics, with some extension in the field of economics and finance. Experimental validation of the formula was performed via the analysis of vibration data covering a number of case studies, which differed in terms of both operation and rock type. A total of 12 experimental cases were analysed and the proposed formulation exhibited a good performance in 11 of them. In particular, the proposed law, which was built using blast test data, produced very good approximations of the points representing the vibration measurements and would thus be useful in organising production blasts. However, the developed formula was found to work less well when a correlation obtained for a given site was applied to another presenting similar types of rocks and operations, and thus should not be employed in the absence of measurements from test data.     

Geospatial analysis for utilizing the marginal land in regional biofuel industry: A case study in Guangdong Province,China

Due to the intensive and exhaustive land use in China, the so-called marginal land is expected to play a major role in supporting the biofuel industry of the country. We developed a regional-level framework of using geospatial information technologies to achieve an optimal utilization of the marginal land for biofuel production. The framework includes identifying marginal lands, evaluating optimality of the land for growing certain bioenergy crops, estimating local potential feedstock production, and finally selecting optimal sites for biofuel factories. We present a case study of farming Jatropha (Jatropha curcas L.) and Cassava (Manihot esculenta Crantz) in Guangdong, China. The marginal land was identified from satellite imageries at a 30-m resolution. The optimality for growing the two species was evaluated using the Ecological Niche Models (ENMs), which incorporates local temperature, precipitation, soil, and terrain. The optimality value was then converted into potential feedstock production using a conversion model. The site selection for the factories incorporated the local potential feedstock production, the transportation cost measured by road distance, and the farming cost related to the land patch geometry. Each candidate site received an overall optimality score derived based on those factors. We identified five sites that have high scores and also minimal or none spatial overlaps of their supporting areas. Three of them (Zhanjiang, Yunfu, and Jieyang) are for Cassava, located on in southern Guangdong. Two (Qingyuan and Meizhou) are for Jatropha in northern Guangdong.     

Synergistic effect of co-alloying elements on site preferences and elastic properties of Ni3Al: A first-principles study

The site preferences of co-alloying elements (Mo–Ta, Mo–Re, Mo–Cr) in Ni₃Al are studied using first-principles calculations, and the effects of these alloying elements on the elastic properties of Ni₃Al are evaluated by elastic property calculations. The results show that the Mo–Ta, Mo–Re and Mo–Cr atom pairs all prefer Al–Al sites and the spatial neighbor relation of substitution sites almost has no influence on the site preference results. Furthermore, the Young's modulus of Ni₃Al increases much higher by substituting Al–Al sites with co-alloying atoms, among which Mo–Re has the best strengthening effect. The enhanced chemical bondings between alloying atoms and their neighbor host atoms are considered to be the main strengthening mechanism of the alloying elements in Ni₃Al.     

Hydrogen adsorption on pristine and platinum decorated graphene quantum dot: A first principle study

In the ever growing demand of future energy resources, hydrogen production reaction has attracted much attention among the scientific community. In this work, we have investigated the hydrogen evolution reaction (HER) activity on an open-shell polyaromatic hydrocarbon (PAH), graphene quantum dot “triangulene” using first principles based density functional theory (DFT) by means of adsorption mechanism and electronic density of states calculations. The free energy calculated from the adsorption energy for graphene quantum dot (GQD) later guides us to foresee the best suitable catalyst among quantum dots. Triangulene provides better HER with hydrogen placed at top site with the adsorption energy as −0.264 eV. Further, we have studied platinum decorated triangulene for hydrogen storage. Three different sites on triangulene were considered for platinum atom adsorption namely top site of carbon (C) atom, hollow site of the hexagon carbon ring near triangulene's unpaired electron and bridge site over C–C bond. It is found that the platinum atom is more stable on the hollow site than top and bridge site. We have calculated the density of states (DOS), highest occupied molecular orbitals (HOMO), lowest unoccupied molecular orbitals (LUMO) and HOMO-LUMO gap of hydrogen molecule adsorbed platinum decorated triangulene. Our results show that the hydrogen molecule (H₂) dissociates instinctively on all three considered sites of platinum decorated triangulene resulting in D-mode. The fundamental understanding of adsorption mechanism along with analyses of electronic properties will be important for further spillover mechanism and synthesis of high-performance GQD for H₂ storage applications.     

Site occupation and energy transfer in full color emitting phosphor Ba2Ca(BO3)2:Ce3+(K+),Eu2+,Mn2+

White light-emitting diodes (WLEDs) fabricated by single-phase full color emitting phosphor are an emerging solution for health lighting. The crystallographic site occupation of activators in a proper host lattice is crucial for sophisticated design of such phosphor. Here, we report a high quality white light-emitting phosphor Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ with spectral distribution covering whole visible region. Blue light emission originates from Ce³⁺ ions occupying preferentially Ba²⁺ site by controlling synthesis conditions. Green and red lights are obtained from Eu²⁺ occupying Ba²⁺ (and Ca²⁺) site and Mn²⁺ occupying Ca²⁺ site, respectively. In this triple-doped phosphor, strong red emission with a low concentration of Mn²⁺ is realized by the efficient energy transfer from Ce³⁺ and Eu²⁺ to Mn²⁺. Furthermore, high quality white light is accomplished by properly tuning the relative doping amount of Ce³⁺(K⁺)/Eu²⁺/Mn²⁺ based on efficient simultaneous energy transfer. The results indicate that Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ is a promising white light-emitting phosphor in WLEDs application.     

Adaptive sampling strategy for characterizing spatial distribution of soil liquefaction potential using cone penetration test

Characterizing spatial distribution of soil liquefaction potential is critical for assessing liquefaction-related hazards (e.g. building damages caused by liquefaction-induced differential settlement). However, in engineering practice, soil liquefaction potential is usually measured at limited locations in a specific site using in situ tests, e.g. cone penetration tests (CPTs), due to the restrictions of time, cost and access to subsurface space. In these cases, liquefaction potential of soil at untested locations requires to be interpreted from limited measured data points using proper interpolation method, leading to remarkable statistical uncertainty in liquefaction assessment. This underlines an important question of how to optimize the locations of CPT soundings and determine the minimum number of CPTs for achieving a target reliability level of liquefaction assessment. To tackle this issue, this study proposes a smart sampling strategy for determining the minimum number of CPTs and their optimal locations in a self-adaptive and data-driven manner. The proposed sampling strategy leverages on information entropy and Bayesian compressive sampling (BCS). Both simulated and real CPT data are used to demonstrate the proposed method. Illustrative examples indicate that the proposed method can adaptively and sequentially select the required number and optimal locations of CPTs.     

Investigation and consideration on landslide zoning of multiple slope failures and debris flows of 2014 disaster in Hiroshima,Japan

This study was intended to examine the mechanism of multiple slope failures and debris flows that occurred in the outskirts of Hiroshima on 20th August 2014. A field survey of the mountain stream where large-scale damage was incurred was carried out and the characteristics of debris flows which made serious damages were investigated. There were five findings of this study. (1) The initiation of debris flows was not limited to thin and planar shallow failures, but also showed V or U shapes, where the eroded sediments seemed to be pushed out by artesian water, and the eroded depth exceeded several meters at many locations. (2) There were areas with high permeability, such as faults, fracture zones, and joints in Mt. Abusan. It is inferred that the constantly present groundwater in these areas became artesian water because of a large amount of rainfall in upstream locations. This quickly destabilized the slopes on a large scale. (3) There were at least three estimated debris flows at the mountain stream above Midorigaoka prefectural apartments in Yagi 3-Chome, where the worst damage occurred. The mountain stream near Abu-no-Sato housing complex also had multiple debris flows. Here, the secondary debris flow changed its flow path because of the presence of sediments from an earlier debris flow. (4) The actual volumes of flowed mass were much larger than that predicted at 11 of the 18 mountain streams in Midori-i and Yagi districts. The volume of the mass of five of these mountain streams was more than twice the estimated volume. It is necessary to modify the method of calculating the volume of unstable sediments in the mountain stream. (5) It was found that the devastating damage of buildings and human lives took place in the areas well beyond the special restricted zones. The present method to designate the special restricted zone must be revised considering such problems as the underestimation of the volume of unstable sediments, the assumptions of a single debris flow and on the direction of debris flow, and the effect of the difference on rock and soil types.     

对风景名胜区和自然保护区实行特许经营的讨论

介绍了国外国家公园实行特许经营的经验,阐述特许经营的基本特征和实行特许经营的一些基本原则。揭示在我国的一些风景名胜区和自然保护区实行的“特许经营”所具有的整体性、垄断性和不公开、不透明等缺陷,分析了以经营等同于管理、以经营取代管理给国家级风景名胜区和自然保护区资源保护管理带来的种种弊端。风景名胜区和自然保护区的特许经营问题,需要进一步的理论研究、个案调查,从而推动立法进程。     

论监理工程师的安全责任

在充分研究国内外建设工程相关法律法规、合同文本及实际案例的基础上,详细分析了监理工程师承担安全责任的原因,总结了监理工程师对建设工程的安全承担责任的前提条件,并针对性地提出了监理企业和监理工程师避免安全责任的具体措施。