保险杠抗压分析流程自动化系统开发

为提升汽车保险杠抗压分析效率、减少重复性劳动、实现仿真分析流程的自动化，利用Python和VBS语言开发一套前、后处理自动化程序。此程序可实现RBE3单元创建、局部坐标系创建、载荷创建、头文件创建、后处理、结果诊断和报告编制等过程的自动化。实际应用结果表明，与传统人工分析相比，该程序可使仿真分析效率大幅提高。通过自动化程序进行仿真，不仅可以保证保险杠抗压分析的精度，同时还可以实现分析的标准化、保证分析的一致性。     

Post-combustion of mazut with CO2 capture using aspen hysys

There is a wide range of resources for CO₂ emissions. The net amount of CO₂ emissions in the cement industry due to the consumption of fossil fuels and the chemical processes of cement production under heating raw materials is reported to be in the range of 15–25%; this industry, among all the industries and after the power plants and refineries, is the largest CO₂ gas producer throughout the world. Using CO₂ capture and storage (CCS), it can reduce greenhouse gas emissions in a short time. In this study, the technical feasibility study of recycling CO₂ in Abyek Cement Company, with a cement production capacity of about 12,500 tons per day in two production lines, has been studied as one of the largest cement industries throughout the world. Fuel oil (Mazut) is used as the primary fuel for furnaces in this industry. Affected by combustion, the emissions emitted from the five-stage preheater contain 5/24% vol% of CO₂, 7.6% H₂O, 4.8% vol% of O₂, and 63.1% N₂.     

Temperature of post‐flashover compartment fires—Calculations and validation

This paper describes and validates by comparisons with tests a one‐zone model for computing temperature of fully developed compartment fires. Like other similar models, the model is based on an analysis of the energy and mass balance assuming combustion being limited by the availability of oxygen, ie, a ventilation‐controlled compartment fire. However, the mathematical solution techniques in this model have been altered. To this end, a maximum fire temperature has been defined depending on combustion efficiency and opening heights only. This temperature together with well‐defined fire compartment parameters was then used as a fictitious thermal boundary condition of the surrounding structure. The temperature of that structure could then be calculated with various numerical and analytical methods as a matter of choice, and the fire temperature could be identified as a weighted average between the maximum fire temperature and the calculated surface temperature of the surrounding structure as a function of time. It is demonstrated that the model can be used to predict fire temperatures in compartments with boundaries of semi‐infinitely thick structures as well as with boundaries of insulated and noninsulated steel sheets where the entire heat capacity of the surrounding structure is assumed to be concentrated to the steel core. With these assumptions, fire temperatures could be calculated with spreadsheet calculation methods. For more advanced problems, a general finite element solid temperature calculation code was used to calculate the temperature in the boundary structure. With this code, it is possible to analyze surrounding structures of various kinds, for example, structures comprising several materials with properties varying with temperature as well as voids. The validation experiments were accurately defined and surveyed. In all the tests, a propane diffusion burner was used as the only fire source. Temperatures were measured with thermocouples and plate thermometers at several positions.     

陈四楼煤矿“123456双重预防体系”的建设与应用

针对煤矿“双重预防体系”如何落地生根问题，结合陈四楼煤矿在风险分级管控和隐患排查治理方面的实用方法和“双重预防体系”的建设经验，深入研究了“双重预防体系”的相关标准、风险隐患事故之间的关系及其各自的产生和发展机理、安全风险的有关辨识评估方法、事故隐患的排查和治理方法，分析了传统安全管理模式与“双重预防体系”的新型安全管理模式的差别，总结出了“123456双重预防体系”这个囊括了事前安全风险辨识、事中隐患排查治理、事后安全现状评估的创新成果，实现了“事前、事中、事后”的全过程控制，对夯实煤矿安全管理根基、促进矿井平稳有序发展发挥着越来越重要的作用，为煤炭行业“双重预防体系”的落地生根提供了借鉴和参考。     

Die Baugesellschaft Gebrüder Rank und ihre spanischen Ziegelgewölbe in München

The Rank construction company and the introduction of brick vaults in Munich after 1945 The construction of vaults without scaffolding with thin bricks has a centuries‐old tradition, particularly in Spain and Italy. Since the beginning of the 19^th century, it has been successfully spread mainly on the American double continent. The Rank Brothers construction company in Munich is known to date as one of those construction companies that began building with concrete in its home city very early on. New investigations, which were made possible above all by the provision of archive material by Paul Basiner, now point to an additional focus of this company's work. The architects and engineers of the company had been also able to familiarise themselves with this traditional Spanish brick‐vaulted construction method via the branch office in Spain, which was established from 1911 on. This knowledge was particularly in demand in the years following World War II, when the destroyed vaults had to be rebuilt with simple means and low material consumption. Together with Carl Sattler, who had become acquainted with similar construction methods in Italy, brick vaults were initially used to complete the construction of the Landeszentralbank in Munich. In the following years, Rank was able to provide many buildings in and around Munich with brick vaults. It was not until the 1960s that this construction technique went out of fashion and was thus somewhat forgotten.     

宜春市审计局综合楼钻孔扩底灌注桩加后压浆设计分析及应用效果

江西省宜春市审计局综合楼所处场地地层条件复杂，确定合适的持力层是关键。经对地层情况、本地区已有经验以及桩基施工新技术等进行分析评估，大胆地把桩端持力层放在结构松散、性质差异较大、承载力标准值偏低的碎石土层上，采用钻孔扩底灌注桩，以提高钻孔灌注桩的承载力，并运用后压浆技术对桩底及下伏地层进行加强处理。实践证明，该方案技术可行，经济合理。     

计算机在建筑设计上的应用

介绍了计算机图形在建筑设计上的应用，并进一步论述了用计算机制作建筑渲染图的方法和步骤     

支架立柱的损坏原因及预防措施

通过对液压支架立柱损坏原因的分析 ,提出预防措施     

后压浆方案的技术可行性论证

从地层选择、效果预测、经济分析和施工应用４个方面对钻孔灌注桩后压浆方案进行可行性论证，并对承载力增幅进行了分析。     

桩底后注浆技术及其应用

通过对后注浆灌注桩与普通灌注桩、扩底灌注桩进行比较，简述了后注浆灌注桩的优点，并对各类地层的后注浆原理及注浆压力进行详细的分析，介绍了桩底后注浆设备及工艺，最后通过工程实例说明桩底后注浆技术的经济效果。