超细全尾砂充填体动态力学特性研究

充填体作为人工矿柱,为矿房回采创造了条件,但经常受到爆破等冲击荷载作用。充填体的动态力学特性直接关系到充填采矿法的安全高效实施。通过单轴压缩试验和分离式霍布金森压杆(Split Hobkinson Pressure Bar,SHPB)试验技术,进行了不同充填配比参数的超细全尾砂充填体压缩试验,得到其静载和动载下的应力-应变曲线和能量变化曲线,并分析了其破坏模式。研究表明:充填体质量浓度越高,灰砂比越大,峰值应力和峰值应变随之增大,呈现正相关性,其中灰砂比和质量浓度对应力的影响相对一致,但应变受质量浓度影响更大;当冲击荷载由0.3 MPa增大至0.6 MPa时,充填体的破坏形式由保持完整形态变为产生裂纹,直至被压碎,转变为完全失稳破坏状态;充填体能量吸收随着冲击荷载的增加而逐渐递增,但质量浓度和灰砂比增大时,充填体比能量和能量吸收率反而下降,其中灰砂比是影响充填体吸能效率的主要因素,质量浓度次之。     

吴庄铁矿盘区间柱回采优化研究

基于吴庄铁矿盘间柱宽度不确定性、两侧均为充填体且高度大的现状，为安全高效回采盘区间柱，制定了盘区间柱两侧采场充填体取芯设计方案，并对充填体进行制样，进行了实验室试块抗压强度试验。试验结果表明：一步骤采场（矿柱）充填体强度整体符合设计强度要求，二步采场充填体强度整体偏低，盘区间柱宽度较设计变化较大，宽度极其不规整，整体呈上窄下宽的规律。鉴于盘区间柱宽度不规则、二步骤采场充填体强度低于预期、采场高度大和盘区间柱回采时不能大面积暴露的特点，采用留设一定厚度间柱和采用较小采场长度的措施进行回采方案制定，制定了小采场分段空场嗣后充填法回采方案。该方案的制定和实施，对于其他类似地下矿山三步骤间柱回采工程具有借鉴意义。     

某矿山特大采空区下矿体回采方案研究

某矿在长期使用空场采矿法中形成了特大采空区，给矿山生产带来了安全隐患。针对这一难题，根据矿山实际的矿体赋存、开采技术经济条件以及空区特征,对空区下矿体回采方案进行了分析与研究，提出了空场嗣后充填采矿法和上向水平分层充填采矿法2种回采方案。考虑到矿山的实际情况，空场嗣后充填采矿法较优，但矿山空区情况已经不容乐观，应及时对空区进行充填处理。     

Fast filling strategy of type III on-board hydrogen tank based on time-delayed method

In order to study the fast filling problem of the type III on-board hydrogen tank, a 3D computational fluid dynamics (CFD) simulation model is proposed. Several simulation calculations are completed to simulate the fast filling process under different initial conditions. In order to control the temperature rise during the fast filling process, the effects of different mass flow rates are studied. Based on the control of mass flow rate, various time-delayed filling strategies for different conditions are proposed to meet the requirement of shortening the filling time as much as possible without exceeding the maximum temperature limit. It is found that if the delay duration is determined, how the filling time is allocated has little effect on the final temperature rise. The proposed strategy can complete the filling within 155s in a general environment, which saves 62% of the time compared with the filling with constant mass flow rate. This research provides the theoretical basis and technical support for mass flow control strategies of fast filling in the hydrogen refueling stations and has guiding significance for the actual filling process of large-capacity hydrogen tanks.     

Opportunities for combining data of Estonian and Russian monitoring to reflect on water quality in large transboundary Lake Peipsi

Lake Peipsi, one of the world’s largest lakes, is shared between Estonia and Russia. The water quality in different parts of the lake has so far been assessed independently. Here we explore opportunities for combining data of Estonian and Russian monitoring. For that, we 1) analysed the compatibility of data for some water quality variables; 2) estimated the potential effects of the differences in sampling frequency; 3) provided a few regression models to calculate the missing data for months not sampled by the Russian side. Data of the concurrent Estonian and Russian sampling indicated a good compatibility. Estonian data analysis suggested that water quality assessment results are sensitive to sampling frequency. For example, total phosphorus (TP) in the largest basin showed a long-term decreasing trend in three month data that disappeared when data for other months were added. Disregarding some months may lead to under- or overestimation of certain factors with no consistency in the response of different basins. Hence, data of the whole ice-free period are recommended for an adequate water quality assessment. Furthermore, we demonstrated that monthly values of the water quality variables of the same year are autocorrelated. Based on this, we filled the gaps in the long-term data and compiled a dataset for the whole lake that enables its most comprehensive use in water quality assessment and management. Long-term data revealed no water quality improvement of Lake Peipsi. Further reduction of the external nutrient load is needed. Eutrophication is sustained by high internal phosphorus load.     

三明气象保障中心值班填报系统的设计与实现

为了简化三明市气象局保障中心值班员填报值班记录的过程,方便值班数据的查询和导出,推进三明市气象局的无纸化办公,减少纸质值班本的使用。本文根据值班内容需求使用易语言和MySQL数据库系统,设计开发了一套贴合保障中心值班流程的信息填报系统。通过不断测试和功能调整,该系统符合保障中心值班工作需求,并简化了工作流程。     

现浇钢筋混凝土空心无梁楼盖若干问题的探讨

综述了现浇钢筋混凝土空心无梁楼盖的发展应用 ,填充构件的型式及各自的优缺点 ,分析了楼盖的传力机理和计算模型 ,讨论了该楼盖在设计和施工中的一些问题     

浅析钢包引流砂的填充方式

为了防止钢包水口处钢水冻结,需要在水口处填充引流砂. 引流砂的材质、粒度,水口座砖的形状,连铸工艺等都影响着引流砂的自开率,引流砂的填充效果也是影响因素之一. 介绍了几种引流砂的充填方式,并对其做了对比.     

基于未确知测度理论的采矿方法优选

为选择适合贵州某金矿的最佳采矿方法,以解决该矿开采难度大与开采成本高的问题,根据矿山实际地质条件,初选出了适用于该矿体的采矿方法。将数值模拟与未确知测度理论相结合,利用数值模拟分析三种备选采矿方法的安全性,同时作为优选模型的指标。结合矿山实践经验,优选出采场生产能力等11项影响采矿方法选择的指标,利用信息熵计算各指标的客观权重,引入置信度识别准则进行评价,同时按照优越度进行排序,构建基于未确知测度理论的采矿方法优选模型。通过综合比较分析,最终确定最佳的采矿方法即下向中深孔落矿嗣后充填法,该方法可以有效解决目前开采遇到的问题,扩大矿山生产能力,降低采矿成本,提高矿山经济效益。     

A pricing-based location model for deploying a hydrogen fueling station network

We propose an innovative two-step Pricing-Based Location strategy for the rollout of new hydrogen fueling stations. A first model maximizes the profit of a new station with a price p¹ which corresponds to a design capacity supplying a given market share (n¹ customers). According to these findings and with the objective of deploying an extensive network, a second model searches for a suitable location as remote as possible from existing competitors, but as close as possible to just n¹ demand locations. This problem is solved by an agent-based model integrating the Particle Swarm Optimization metaheuristic and a Geographic Information System representing the geospatial distribution of customer demand. We apply this model to the city of Paris by locating additional stations across the city one by one to supply a growing captive fleet of taxis and other transport operators in the future.