中性施胶剂AKD在造纸工业中的应用

简述了AKD施胶剂的合成、施胶机理与特点及影响因素。作为一种有效的合成中性施胶剂,AKD将有广阔的市场。     

LT348电路的研制

本文介绍了ＬＴ３４８的电路、版图和工艺设计。ＬＴ３４８是由四个功能和７４１组件等同而又各自独立的高增益、内补偿、低功耗运放器组成，并且它的电源电流可以和单个的７４１典型运放器相比拟。此外，它还具有比标准７４正低得多的输入失调电流和输入偏流的特征。     

Simultaneous HPLC quantification of total cholesterol,tocopherols and β-carotene in Barrosã-PDO veal

A simple, rapid and sensitive procedure for the simultaneous determination of total cholesterol, tocopherols and β-carotene in meat is described. The method involves a direct saponification of the meat, a single n-hexane extraction and the analysis of the extracted compounds by normal-phase HPLC, using fluorescence (tocopherols) and UV–Vis photodiode array (cholesterol and β-carotene) detections in tandem. Rates of recovery of spiked meat samples were 93% for cholesterol, 83–86% for (α-, β- and -γ) tocopherols and 89% for β-carotene. Repeatabilities were high (CV < 6%) for all determined compounds, except for δ-tocopherol. This tocopherol, which is not usually present in meat, showed a much lower recovery percentage (73%) and repeatability (12.8%). This methodology was applied for the quantification of total cholesterol, tocopherols and β-carotene in three muscles (longissimus thoracis, longissimus lumborum and semitendinosus) of the Portuguese traditional Barrosã-PDO veal, obtained from autochthonous calves fed extensively during summer (with the least abundant green pastures) and slaughtered in early autumn (October). Barrosã-PDO veal showed median contents of total cholesterol (0.50–0.56 mg/g) and, depending on the analysed muscle, moderate to high contents of α-tocopherol (3.3–3.9 μg/g) and β-carotene (0.07–0.09 μg/g), suggesting an high sensorial and hygienic quality.     

Influence of Fillers on Sizing Efficiency and Hydrolysis of Alkyl Ketene Dimer

The influence of various fillers on sizing efficiency, adsorption and hydrolysis of alkyl ketene dimer (AKD) has been investigated. Results indicated that the precipitated calcium carbonate (PCC) improved AKD retention, both bound and unbound. The sizing efficiency was reduced as PCC contents increased, which might be attributed to the decrease in the relative AKD dosage to fibres and AKD hydrolysis promoted by PCC. Less amount of AKD was adsorbed on PCC, compared with calcined clay and TiO₂ fillers under the same conditions. Hydrolysis studies indicated that PCC had a more detrimental effect on AKD hydrolysis than clay and TiO₂.     

基于LT3182和LC3282的429总线收发装置

为了实现对用户需求的快速响应,设计了以L89C51RD2为核的系统板。对于LT3182和LC3282的功能进行演示和测量,并能够检测产品参数指标。实践证明,该板能够演示LT3182和LC3282的各项功能,并能够满足现场分析需求。     

基于LT喷泉码的WSNs抗WLAN干扰的实验研究

针对无线传感器网络(WSNs)通信能力有限,易受到与其共享信道的无线局域网(WiFi)干扰的问题,提出一种采用纠删码——LT喷泉码编码来保证可靠传输的方法。该方法可以充分利用喷泉码的无码率特性,即发送端源源不断地发送经过LT码编码的编码包,接收端只要接收到足够数量的编码包,就能够成功恢复原始数据包。在CC2430为核心的平台上设计并实现了基于LT喷泉码的可靠传输协议,并在WLAN干扰情况下对其进行了性能测试。实验结果表明:基于LT喷泉码的可靠传输协议对WLAN的抗干扰效果显著。     

强化两相混合的超临界技术制备聚乳酸微粒

针对商品化聚乳酸微球粒径分布较宽难于适用气溶胶给药要求的不足,采用水力空化混合强化超临界流体辅助雾化技术(SAA-HCM)制备聚乳酸(PLA)超细微粒.该技术主要特点是通过在超临界流体和液相进料处引入水力空化混合器,强化两相间的混合.考察SAA-HCM过程混合器压力、温度、沉淀器温度、进料中CO2与液体溶液质量流量比和溶液质量浓度等操作参数对微粒形态和粒径分布的影响,成功制备出球形度较好,粒径分布较窄(1～3μm)的PLA微球.经X射线衍射(XRD)分析和差示扫描量热(DSC)分析显示,与原料PLA相比,微球晶型及热曲线变化不大,但结晶度下降.同时把操作参数与相行为进行关联,探讨了影响颗粒形貌的机理.对比超临界流体辅助雾化法(SAA)的实验结果表明:水力空化的引入能有效强化混合器内的两相传质,混合更好,能制备出适用于气溶胶给药要求的超细微粒.     

FANUC-18M和计算机的数据传输方法

本文针对LT传输软件在我厂数控机床系统数据中的应用展开说明，为大家提供一种数据备份的方法。     

基于现场试验的海上风电大直径单桩三维水平承载力研究

p－y 曲线法是计算分析水平受荷桩常采用的方法。但现场多为 3 m 以内直径试桩,对于海上风电大直径单桩( 4～8 m) 结构的桩土相互作用计算分析,其适用性值得商榷。结合江苏某海上风电大直径钢管桩水平静载荷试验,得到桩身挠度曲线和弯矩曲线; 采用 ABAQUS 建立单桩三维数值模型,将数值模拟结果与试验结果进行了对比分析,并对桩土接触法向刚度进行初步的敏感性分析,验证数值模型的有效性和适用性。随后对大直径单桩进行水平静载数值模拟,与规范推荐的 p－y 曲线法计算结果进行对比,结果表明,规范推荐的 p－y 曲线法过于保守,规范推荐的 p－y 曲线法不适于直接应用在大直径钢管桩的水平承载力分析; 所得结论对该区域海上风电大直径钢管桩设计优化具有指导意义。     

邦纳长距离激光传感器在物流行业巷道堆跺机中的应用

物流行业刚刚成为国家重点扶持的十大振兴行业之一,其中在整个物流产业链中立体仓库占有极其重要的作用。现代激光测距与定位技术在立体仓库中有着重要的作用,在有轨巷道堆垛机自动控制系统中的应用,实现了堆垛机的绝对定位。不仅有效解决了计数与定位的精度与可靠性。而且方便地实现了平滑调速,从而提升堆垛机的整机性能。