Analysis of Phytochemical Composition of Camellia oleifera Oil and Evaluation of its Anti-Inflammatory Effect in Lipopolysaccharide-Stimulated RAW 264.7 Macrophages

In China, Camellia oleifera oil (COO) is not only a common edible oil but also a traditional remedy widely applied to ameliorate a variety of illnesses associated with inflammation, such as mouth ulcers, thrush, eczema, etc. However, there has been a lack of relevant biological research on the anti-inflammatory capacity of COO, and the specific bioactive lipid phytochemicals contributing to the anti-inflammatory effect need further research. In this study, the RAW 264.7 macrophages model was used to investigate the anti-inflammatory capacity of COO. Our data showed that 33–200 μg/mL COO markedly inhibited the lipopolysaccharide lipopolysaccharide (LPS)-stimulated nitric oxide (NO.) secretion via the suppression of Nos2 and Cox-2 expression. The enzyme immunoassay confirmed that COO also exhibited a strong suppressive effect on the expression of proinflammatory cytokines such as Tnf-α and Il-6. To further explore the correlation between the anti-inflammatory effects and the lipid phytochemicals in COO, 10 samples were collected and screened for their chemical compositions. It was interestingly demonstrated that the polyphenol extracts of COO play a vital role in its anti-inflammatory properties. In addition, an oil-in-water (O/W) emulsion-based system was also developed to deliver the liposoluble COO into the cells, and the feasibility of this system was confirmed. Our research confirms the anti-inflammatory potential of COO and highlights that the main functional ingredient is polyphenol extracts. This may provide a scientific basis for the comprehensive utilization and development of COO and related functional foods.     

蒜头果油合成1,15-十五碳二酸二甲酯的研究

研究了由蒜头果油制取1,15-十五碳二酸二甲酯的3种合成路线,比较了3种合成路线中臭氧化的吸收特征.结果表明,合成路线一为5步反应,1,15-十五碳二酸二甲酯收率为26.9%;路线二为4步反应,1,15-十五碳二酸二甲酯收率为61.7%;路线三为3步反应,1,15-十五碳二酸二甲酯收率为68.1%.通过对比确定路线3是最佳合成方案.用拟水平正交试验法对路线3的酯化反应进行优化,确定最佳的反应条件是:反应温度70 ℃左右;催化剂用量与原料比为1∶5(v·m-1);反应时间2 h.该优化条件可使1,15-十五碳二酸二甲酯收率达到72.4%.     

PET在油茶壳炭C⁃SO3H基固体酸催化剂下的液化行为研究

以废弃生物质油茶壳为原料,在经过一系列炭化、磺化后成功制备了一种新型的炭基固体酸催化剂（C-SO₃H）,考察了催化剂制备过程中温度和浓度等因素对催化活性的影响,利用X射线衍射仪、扫描电子显微镜、红外光谱仪和核磁共振波谱仪等对催化剂及其催化废弃聚对苯二甲酸乙二醇酯（PET）的催化效率、催化机理等进行了测定和分析。结果表明,催化剂的最佳制备条件为：浸渍比1∶1、浸渍浓度2 mol/L、炭化温度700 ℃、磺化温度160 ℃;催化PET的最大的转化率和BHET回收率分别为95 %和68 %;催化剂微观呈现无定型炭结构,含有大量的羟基,具有较大的比表面积;醇解反应产物为单体BHET。     

Study of the oxidation stability and exhaust emission analysis of Moringa olifera biodiesel in a multi-cylinder diesel engine with aromatic amine antioxidants

In this study, the two most effective aromatic amine antioxidants N,N′-diphenyl-1,4-phenylenediamine (DPPD) and N-phenyl-1,4-phenylenediamine (NPPD), were used at a concentration of 2000 ppm. The impact of antioxidants on the oxidation stability, exhaust emission and engine performance of a multi-cylinder diesel engine fuelled with MB20 (20% Moringa oil methyl ester and 80% diesel fuel blend) were analysed at varying speed conditions at an interval of 500 rpm and a constant load. It was observed that, blending with diesel enhanced the oxidation stability of the moringa biodiesel by approximately 6.97 h, and the addition of DPPD and NPPD to MB20 increased the oxidation stability up to 34.5 and 18.4 h, respectively. The results also showed that the DPPD- and NPPD-treated blends reduced the NOx emission by 7.4% and 3.04%, respectively, compared to the untreated blend. However, they do have higher carbon monoxide (CO) and hydrocarbon (HC) levels and smoke opacities, but it should be noted that these emissions are still well below the diesel fuel emission level. The results show that the addition of antioxidant with MB20 also improves the engine's performance characteristics. Based on this study, MB20 blends with amine antioxidants can be used in diesel engines without any modification.     

Ultrasound-assisted extraction of oil from Moringa oleifera Lam. seed using various solvents

The present research analyzes the extraction of oil from Moringa oleifera Lam. seed using ultrasound-assisted extraction (UAE) technique under different operating conditions such as temperature, solvent type, and time. Three factors with three levels Box-Behnken response surface design was employed to optimize and investigate the effect of process variables on the response (oil yield). The independent variables showed significant effect on the extraction process. Interactive effects of the extraction process variables were analyzed by Pareto analysis of variance (ANOVA), and second-order polynomial model was used to plot the 3D response surface plot. Optimum extraction conditions for the maximizing the extraction yield of oil (59%) was found to be: temperature of 35°C, solvent type of 2, and time of 20 min. FT-IR was used to analysis the oil. From the results, it can be concluded that the UAE is the effective technique to extract the oil from Moringa oleifera Lam. seed.     

Characterization of the Chemical Composition of Chinese Moringa oleifera Seed Oil

This work focused on physicochemical property assaying, fatty acid composition, triacylglycerol (TAG) profiles, and unsaponifiable matter composition of the Chinese Moringa oleifera seed oil. The results indicated that there was no significant difference in approximate nutritional components between M. oleifera seeds from China and India, while variations in the mineral element contents are significant. Both the Soxhlet extraction method and the aqueous enzymatic extraction method were adopted to extract oil from Chinese M. oleifera seeds. Oil yield obtained using the Soxhlet extraction method was higher than that obtained using the aqueous enzymatic extraction method. While both the iodine value and unsaponifiable matter content of the aqueous enzymatic extracted oil were a little higher than that of the Soxhlet extracted oil. Both oils possess a very low acid value and peroxide value, suggesting their good quality as edible oil. Fatty acid composition results indicated that this oil was especially high in oleic acid. Characterization of the TAG composition was achieved by a two-dimensional high-performance liquid chromatography (HPLC) coupling of nonaqueous reverse-phase and silver ion HPLC with the atmospheric pressure chemical ionization mass spectrometry method. A total of 22 TAG including 16 regioisomers were determined. Composition results of unsaponifiable matters revealed that this oil possesses a number of phytosterols, in which β-sitosterol and stigmasterol are most predominant.     

Production of yellow wine from Camellia Oleifera meal pretreated by mixed cultured solid‐state fermentation

Camellia oleifera meal was evaluated to be a potential feedstock for the production of yellow wine (YW), and process conditions were investigated. In this study, C. oleifera meal was firstly pretreated using mixed cultured Bacillus subtilis and Aspergillus niger under solid‐substrate fermentation to degrade the tea saponin (TS) for the following YW fermentation. Response surface methodology helped evaluate the effects of the selected operating parameters, and the optimal condition at a fixed time of 4 days, which gave a 67.84 ± 0.23% degradation rate of TS, was reached as inoculum concentration of 16%, initial moisture content of 55% and temperature of 30 °C. Finally, 7‐day fermentation was harvested to be the most suitable pretreatment for producing YW from C. oleifera meal, and the twice‐feeding fermentation for YW was obtained as wheat koji 12% and active yeast 1.2%. In addition, ample amino acids, phenolic components and the trace TS endowed the C. oleifera wine, the more nutritional characteristics.