基于化学监督的超(超)临界机组关键控制节能指标分析及建议

针对超(超)临界机组参数提高、材质升级,化学技术监督中的监督指标对机组经济性和可靠性影响较大的问题,本文通过机组典型案例分析、技术监督报告、现场实测等,对目前化学监督中影响较大的、关键的技术指标进行了系统性的分析研究。研究结果找出了6项化学监督中超(超)临界机组关键的、影响较大的控制监督指标,且提出了指标控制值和控制方法。这项系统性研究分析方法对指导超(超)临界机组化学监督具有重要的借鉴作用,以控制超(超)临界机组因参数提高和材质升级带来的新问题和新挑战。     

An efficient method of generating vortex electromagnetic wave based on double‐layer transmissive metasurface

A broadband double‐layer transmissive metasurface (TMS) for effective generate vortex electromagnetic wave is presented in this paper. The proposed TMS consists of two types of elements. The first element is composed of a multi‐resonant dipole and four metal vias. The metal vias increase the coupling strength between the upper and lower layers to improve transmission efficiency. On the basis of the first element, the second element adds stubs to ensure sufficient phase shift. The far‐field cross polarisation is eliminated by special element arrangement. Then, a centre‐fed linear polarisation TMS is designed to generate orbital angular momentum beams with mode l = ? 1. The proposed TMS is designed, manufactured and measured to verify the proposed design. The measured results indicate that a maximum gain of 20.8 dBi and narrow divergence angle of ±5° are achieved at 18 GHz. Furthermore, mode purity is higher than 86.1% within the 17 to 19 GHz band. The proposed double‐layer TMS saved costs, reduced weight and without assembly error is a good candidate for OAM generator.     

Ductile-brittle transition mechanisms of amorphous glass subjected to taper grinding experiment

Taper grinding experiments were conducted in this paper to investigate the continuous and complete ductile-brittle transition process of two kinds of amorphous glass: high purity fused silica (HPFS) which is silica rich glass and soda-lime silica glass (SLSG) which is low silica glass. The grinding force, ground surface morphology, surface roughness, and subsurface damage depth induced during different stages of taper grinding were all analyzed. A mathematical model describing the cutting force of a grit and micro-crack length was established to clarify the ductile-brittle transition mechanisms of isotropic material. The model revealed that material removal mechanisms and grinding force were mainly determined by the crack equivalent length in front of the grit and its equivalent cutting force. The ground surface roughness and subsurface damage depth were mainly affected by the cutting force of the grit and length of cracks behind it. The ductile machinability of SLSG was better than that of HPFS due to the bonding of metallic atoms in SLSG with nonbridging oxygens, as well as their packing into free volume in SiO₂ network.     

Synthesis and luminescence properties of reddish-orange-emitting Ca2GdNbO6:Sm3+ phosphors with good thermal stability for high CRI white applications

Novel reddish-orange-emitting Ca₂GdNbO₆:Sm³⁺ phosphors based on the emission of ⁴G_5/2 → ⁶H_9/2 transition at 651 nm with the chromatic coordinate of (0.633, 0.366) were synthesized. The crystal structure and chemical purity were identified in detail. Under the 407 nm excitation, the optimum concentration of Sm³⁺ ion was found to be 5 mol% dominated by the dipole-dipole interaction in the Ca₂GdNbO₆ host material. The color purity of the sample with optimum doping was estimated to be about 78.38%. Besides, the thermal stability was also studied, and it was further found that the emission intensity remained 65.32% at 423 K. The packaged white LED device exhibited excellent CRI and CCT values of 92.43 and 4896 K. Finally, the polydimethylsiloxane film with a stable structure and flexible property was prepared. These above results reveal that novel reddish-orange-emitting Ca₂GdNbO₆:Sm³⁺ phosphors can be applied in high CRI white communication and flexible display applications.     

Low‐Temperature Chemical Synthesis of High‐Purity Diacylglycerols (DAG) from Monoacylglycerols (MAG)

A chemical method was developed for low‐temperature synthesis of DAG from MAG followed by an easy purification procedure in order to obtain high‐purity DAG. Solvent‐assisted and solvent‐free reaction conditions were used, combined with different catalysts (sodium methoxide, p‐toluenesulfonic acid, methanesulfonic acid, and sulfuric acid). All reactions were performed at 35 and 70 °C. By increasing both acidity and polarity of the catalyst the equilibrium shifts towards the formation of DAG. When using sulfuric acid in solvent‐assisted condition at 70 °C, 88 % conversion was obtained after 20 min of reaction (77 % w/w DAG in the reaction mixture after evaporation of the solvent). After purifying by means of column chromatography, 96 % pure DAG were obtained. The overall yield of DAG was 81 %.     

Comparison of isolation methods using commercially available kits for obtaining extracellular vesicles from cow milk

Extracellular vesicles (EV) are important for delivering biologically active substances to facilitate cell-to-cell communication. Milk-derived EV are widely known because of their potential for immune enhancement. However, procedures for isolating milk-derived EV have not been fully established. To obtain pure milk-derived EV and accurately reveal their function, such procedures must be established. The aim of the present study was to compare methods using commercially available kits for isolating milk-derived EV. Initially, we investigated procedures to remove casein, which is the major obstacle in determining milk-derived EV purity. We separated whey using centrifugation only, acetic acid precipitation, and EDTA precipitation. Then, we isolated milk-derived EV by ultracentrifugation, membrane affinity column, size exclusion chromatography (SEC), polymer-based isolation, or phosphatidylserine-affinity isolation. Using EV count per milligram of protein, which is a good indicator of purity, we determined that acetic acid precipitation was the best method for removing casein. Using nanoparticle tracking analysis, protein quantity analysis, and RNA quantity analysis, we comprehensively compared each isolation method for its purity and yield. We found that SEC-based qEV column (Izon Science) could collect purer milk-derived EV at higher quantities. Thus, a combination of acetic acid precipitation and qEV can effectively isolate high amounts of pure extracellular vesicles from bovine milk.     

Separators for alkaline water electrolysis prepared by plasma-initiated grafting of acrylic acid on microporous polypropylene membranes

Highly hydrophilic separators for alkaline water electrolysis were prepared by plasma-initiated grafting of acrylic acid on porous polypropylene (PP) membranes. The membranes were activated in a low-pressure radio-frequency discharge in oxygen and subsequently graft polymerization of acrylic acid was performed in aqueous solution. The membranes were characterized by gravimetric grafting degree (GD), SEM, FTIR, critical wetting surface tension (CWST) test, mechanical strength, and electrolytic conductivity. Moreover, the membranes were applied as separators in alkaline electrolysis cell, and content of hydrogen in the produced oxygen was measured to determine membrane permeability to hydrogen dissolved in the electrolyte. It was observed that increasing GD improves performance of membranes as separators in alkaline electrolysis, although the particular effects on the electrolytic conductivity and hydrogen permeability strongly depend on structure the of initial PP substrate. Ageing test conducted in 30 wt% KOH at 60 °C revealed that although considerable degrafting took place at beginning of the test, the remaining polyacrylic acid provided highly hydrophilic character to membrane for 7000 h of the test.     

高纯半绝缘SiC电阻率影响因素

采用物理气相传输(PVT)法进行高纯半绝缘SiC晶体生长,利用高温真空解吸附以及在系统中通入HCl和H2的方法,有效降低了系统中N、B和Al等杂质的背景浓度。使用二次离子质谱(SIMS)对晶体中杂质浓度测试,N、B和Al浓度分别小于1×1016、1×1015和2×1014 cm-3。对加工得到的晶片进行测试,全片的电阻率均在1×1010Ω·cm以上,微管密度小于0.02 cm-2,(004)衍射面的X射线摇摆曲线半高宽为34″。结果表明,该方法可以有效降低SiC晶体中N、B和Al等杂质浓度,提升SiC晶片的电阻率。使用该方法成功制备了4英寸(1英寸=2.54 cm)高纯半绝缘4H-SiC晶体。     

基于LCP径向偏振光输出的掺镱MOPA脉冲光纤激光器

为实现光纤激光器径向偏振光的高效输出,提出并搭建了基于液晶聚合物(LCP)的纳秒脉冲掺镱(Yb)主振荡器功率放大(MOPA)系统。该系统采用空间相位转换法,利用LCP涡旋半波片将全光纤MOPA激光器输出的高峰值功率、窄线宽、线偏振、高斯形分布的纳秒脉冲信号转换为横向强度呈空心环状分布的拉盖尔-高斯光。MOPA激光器系统由窄线宽连续种子源、电光强度调制器和后续的5级YDF放大器组成,通过实验获得了20.1 W的稳定LP01模输出。而后的LCP涡旋波片用作空间模式转换器,最终获得的平均输出功率为19.5 W,脉宽为10 ns,重复频率为10 kHz,横向剖面呈规则空心环形的径向偏振光输出,模式转换效率可达97%。另外,通过PBS测量法测得径向偏振光的模式纯度约为88.5%,兼具高功率与高纯度的优势。