基于CFD⁃DEM的水下切粒装置水室内颗粒流动过程数值模拟

基于CFD?DEM耦合方法，研究了颗粒在水室内的流动状态，分析了不同刀盘转速、粒子水通入量和水室出口角度对造粒过程的影响，发现提高刀盘转速、增加粒子水通入量和水室出口倾斜一定的角度都有利于水室内颗粒的排出。进一步研究了颗粒与碎屑在水室内的流动，发现在水室出口处二者的流动基本呈现出一定的分离角度。     

Realizing fragment spawning and fragment growth in the parallelized Discrete Element Method (DEM) during modelling of comminution

The particle based Discrete Element Method (DEM) can be applied to examine comminution processes. In this study, a DEM framework has been extended to model particle breakage without mass loss. After a breakage event occurs, spherical particles, as often considered in the DEM, are replaced by size reduced spherical fragments. During the following time steps, the fragments grow to their desired sizes, so that the mass loss can be counterbalanced. Previously defined overlaps with adjacent unbroken and broken particles (fragments) as well as walls are allowed. The breakage model has been realized in a parallelized DEM framework because comminution processes are often attributed to large numbers of particles and by parallelization the computational time can be reduced efficiently. An oedometer (one-dimensional compression in axial direction of a confined particle bed) has been modelled to investigate the parallelization efficiency and the influence of the permitted overlaps during the growth process on the growth duration. A simplified roller mill has been considered to examine the applicability of the breakage procedure considering parallelization. The results show that parallelization reduces computational time considerably. The breakage procedure is suitable to model comminution processes involving even densely packed particle systems and is superior to existing approaches.     

Influence of particle contact models on soil response of poorly graded sand during cavity expansion in discrete element simulation

The discrete element method (DEM) has been extensively adopted to investigate many complex geotechnical related problems due to its capability to incorporate the discontinuous nature of granular materials. In particular, when simulating large deformations or distortion of soil (e.g. cavity expansion), DEM can be very effective as other numerical solutions may experience convergence problems. Cavity expansion theory has widespread applications in geotechnical engineering, particularly to the problems concerning in situ testing, pile installation and so forth. In addition, the behaviour of geomaterials in a macro-level is utterly determined by microscopic properties, highlighting the importance of contact models. Despite the fact that there are numerous contact models proposed to mimic the realistic behaviour of granular materials, there are lack of studies on the effects of these contact models on the soil response. Hence, in this study, a series of three-dimensional numerical simulations with different contact constitutive models was conducted to simulate the response of sandy soils during cylindrical cavity expansion. In this numerical investigation, three contact models, i.e. linear contact model, rolling resistance contact model, and Hertz contact model, are considered. It should be noted that the former two models are linear based models, providing linearly elastic and frictional plasticity behaviours, whereas the latter one consists of nonlinear formulation based on an approximation of the theory of Mindlin and Deresiewicz. To examine the effects of these contact models, several cylindrical cavities were created and expanded gradually from an initial radius of 0.055 m to a final radius of 0.1 m. The numerical predictions confirm that the calibrated contact models produced similar results regarding the variations of cavity pressure, radial stress, deviatoric stress, volumetric strain, as well as the soil radial displacement. However, the linear contact model may result in inaccurate predictions when highly angular soil particles are involved. In addition, considering the excessive soil displacement induced by the pile installation (i.e. cavity expansion), a minimum distance of 11a (a is the cavity radius) is recommend for practicing engineers to avoid the potential damages to the existing piles and adjacent structures.     

基于DEM的振动筛筛孔形状对潮湿原煤筛分效果影响的研究

随着原煤含水量的增加,引起原煤颗粒间相互粘聚,影响振动筛筛分效率。基于离散元法,运用EDEM软件模拟了潮湿原煤颗粒在圆形筛孔、方形筛孔和矩形筛孔的筛分过程,并且以筛分效率和阻碍粒排出率为衡量指标,对振动筛筛孔形状影响潮湿煤筛分效果进行了研究。结果表明:在筛孔名义尺寸相同的情况下,潮湿煤在矩形筛孔筛面上的筛分效果最好,方形筛孔次之,圆形筛孔最差。     

基于CFD-DEM方法的净化器流场模拟与结构优化

针对空气净化器能耗高的问题，使用离散元方法(DEM)在吸附滤网中建立随机堆积柱形活性炭模型，采用计算流体力学(CFD)方法对空气净化器内部流场进行数值模拟，在模拟与实验验证的基础上，考察了压降最小、流场最均匀的吸附滤网结构。结果表明，空气净化器压降主要发生在轴向，活性炭吸附滤网中回流、沟流现象严重，流体阻力是其他两种滤网的3倍。边数对多边形填充孔结构吸附滤网内压降与流场均匀性无影响，当孔结构改为圆形时，压降减小约52 Pa，节能18.4%(49 W)；当孔直径由8 mm增至12 mm，压降减小约48 Pa，节能19.4%(45 W)；滤网间距对空气净化器压降无影响，圆形、小孔径的吸附滤网内流场最均匀。     

Discrete element method study on hopper discharge behaviors of binary mixtures of nonspherical particles

This study is aimed at unveiling the influence of binary mixtures of nonspherical particles on hopper discharge behavior, which remains poorly understood. The discrete element method (DEM) is employed to simulate seven particle types with aspect ratios between 0 and 2 (namely, a sphere, two ellipsoids, two cylinders, and two cuboids) with the same volume. Seven monodisperse systems and twelve binary-shape mixtures are assessed. For the monodisperse systems, particle shape is the dominant factor dictating discharge rate, compared to other factors like aspect ratio, preferential orientation, and packing. Regarding the binary-shape mixtures, the discharge rates are similar for all twelve mixtures, reflecting a surprising lack of shape effects, which in turn means the negligible impact of solid volume fraction, aspect ratio, and segregation extent. Moreover, collision force is generally negatively correlated with discharge rate.     

地籍测量中面积量算方法分析对比

文章分别利用传统的面积统计方法(即在南方CASS软件中利用全解析法进行面积量算)与在ArcGIS中通过建立DEM模型来减少投影变形之后进行面积量算两种方法进行比较。经比较得出两种面积统计方法都是正确可行的,但利用ArcGIS建立的TIN模型,建立了测区的三维模型,并可以统计出了测区的表面积。在地形起伏较大的地区进行土地勘测定界工作,面积计算时应充分考虑起伏的地表表面积与其平面面积的差异,这对土地征收、征用、农用地转用等具有重要的实际意义。     

Influence of pores arrangement on stability of photonic structures during sintering

Discrete Element Method (DEM) has been used for numerical investigation of sintering-induced structural deformations occurring in inverse opal photonic structures. The influence of the initial arrangement of template particles on the stability of highly porous inverse opal α-Al₂O₃ structures has been analyzed. The material transport, densification, as well as formation of defects and cracks have been compared for various case studies. Three different stages of defects formation have been distinguished starting with local defects ending with intrapore cracks. The results show that the packing of the template particles defined during the template self-assembly process play a crucial role in the later structural deformation upon thermal exposure. The simulation results are in very good agreement with experimental data obtained from SEM images and previous studies by ptychographic X-ray tomography.     

转载溜槽衬板磨损预测的DEM仿真方法

针对EDEM自动划分网格较稀疏问题,采用Hypermesh划分仿真模型网格,利用Herz-Mindlin接触理论的Archard磨损模型对转载溜槽磨损问题进行仿真,在网格单元上提取出漏斗和溜管衬板的接触能量和磨损量,分析了磨损量与接触能量的关系。假设转载溜槽衬板磨损深度为物料与溜槽衬板的使用时间为线性函数,根据现场衬板磨损量的测量值,将衬板的磨损系数关系的看作隐式的单变量方程,应用EDEM软件的仿真结果求解出磨损系数的标定值。分析了漏斗和溜管的磨损机理。该方法可用于转载溜槽的磨损预测。     

Modeling the Electrical Conductive Paths within All-Solid-State Battery Electrodes

All-solid-state batteries constitute a very promising energy storage device. Two very important properties of these battery cells are the ionic and the electrical conductivity, which describe the ion and the electron transport through the electrodes, respectively. In this work, a numerical method is presented to model the electrical conductivity, considering the outcome of discrete-element method simulations and the intrinsic conductivities of both the active material particles and the conductive additive particles. The results are calibrated and validated with the help of experimental data of real manufactured electrodes. The tortuosity, which strongly influences the ionic conductivity, is also presented for the analyzed electrodes, taking their microstructure into account.