Volatile organo-halogen trace analysis in beverages by thin-layer headspace enrichment and electron-capture gas-chromatography

Applicability of thin-layer headspace (TLHS) procedure giving an aqueous concentrate and also classical purge and trap (PT) in off-line mode to isolate and enrich volatile organohalogen compounds in common beverages was tested. Both enrichment tech-niques were used in combination with gas chromatography – electron capture detection (GC-ECD). TLHS, combined with direct aqueous injection (DAI)-GC-ECD, proved applicable in the determination of volatile organohalogen compounds in all studied beverages, while the PT in a version with no preliminary sample pre-treatment was of limited applicability. Detection limits of the TLHS-based procedure were in the order of 1 ppt. Content of volatile organohalogen compounds in a number of beverages available on the Polish market including mineral waters, beers, juices, carbonated and non-carbonated soft drinks, etc. was determined by means of TLHS-DAI-GC-ECD.     

Natural zeolite utilisation in pollution control: A review of applications to metals' effluents

This paper assesses the potential of natural zeolite utilization as a low-cost ion-exchange and sorbent material in pollution control and recovery of metals. The improvement of the purity of natural zeolites coupled with their chemical modification capabilities in order to provide specific properties may provide a cost-effective alternative for the treatment of heavy metal contaminated soil and water. The application of natural zeolites in industrial pollution control is becoming important and the level of technical effort is increasingly expanding. The extent of application is unlikely to be related solely to their low cost, but also to improved properties and performance characteristics, which will advance the practical implementation of natural zeolites' technology.     

Occurrence of Lawn Care and Agricultural Pesticides in the Don River and Humber River Watersheds (1998–2002)

Between 1998 and 2002, surface water samples were collected from several sites in the Don River and Humber River watersheds, both tributaries to Lake Ontario, and analyzed for a variety of pesticides, including those used for urban lawn care. Analyses included 152 pesticide active ingredients and eight metabolites. Samples were collected during base flow periods (i.e., dry events) and rainfall events (i.e., wet events). The objectives of the study were to determine which pesticides were detectable, whether there was a difference in the detection frequency between the two watersheds and between upstream and downstream in each river, and whether precipitation influenced the frequency of detection. Eleven pesticides and one metabolite were detected in surface waters of the Don and Humber rivers or their tributaries, with approximately 72% of samples containing at least one pesticide attributable to lawn care use. The pesticides and pesticide metabolite detected in this study included 2,4-D, atrazine, bromacil, carbofuran, chlorpyrifos, cypermethrin, diazinon, dicamba, MECOPROP, metolachlor, metribuzin, and an atrazine metabolite (des-ethyl atrazine). Four pesticides exceeded federal or provincial water quality guidelines/objectives. Diazinon exceeded the provincial water quality objective in 28% of the samples taken. For the three other pesticides (atrazine, carbofuran and chlorpyrifos) exceedance of a water quality criteria occurred in less than 1% of the samples.     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .     

Biosorption of heavy metals by Saccharomyces cerevisiae: Effects of nutrient conditions

Studies took place to investigate the effects of different nutrient conditions on the biosorption ability and selectivity of heavy metals by Saccharomyces cerevisiae. After having grown in media supplemented with additional glucose, ammonium, phosphate or cysteine, the yeast was exposed to an equimolar solution of lead, cadmium, zinc and copper. Lead removal from a mixed solution was significantly higher than that of copper, followed by zinc and cadmium. Generally, yeasts from cysteine-rich media showed greatest sorption capacity whereas phosphate addition influenced zinc selectivity. In addition, glucose, fructose and sucrose as carbon sources were examined. Cultures grown in glucose had a better uptake than those cultivated with fructose at an incubation time of 30 min.     

Potential of ground heat source systems

This paper presents a historical background of ground source heat pump technology, followed by a review of its current shortcomings. Based on these observations the author assesses the R&D needs and recommendations for future research.     

The Danish Twin Apartment Study – Part II: Mathematical modeling of the relative strength of sources of indoor air pollution

Abstract This study deals with the modeling of air pollution in apartments from laboratory measurements of source strengths, using formaldehyde and Total Volatile Organic Compounds (TVOCs) as model pollutants. The sources in two test apartments were grouped into two: building-related sources and occupant-related sources. The measured source strengths and ventilation rates were used for the prediction of concentrations expected in the apartments. These predictions were compared to measurements in the apartment over 12 months. The conclusions were that the model predictions based on emission rates measured in the laboratory can be used to predict the long-term concentration of the two model pollutants in the apartments. Considering the measured differences in ventilation between the apartments, an occupant emission rate of between 0.2 and 0.3 mg/h/kg body weight could be estimated. Based on previous suggested limits of acceptable exposures of humans to VOCs, an acceptable average emission rate of VOCs from building materials in general was estimated to be about 30 (μ/m²/h. The modeling showed that during the first 200 days, building materials dominated the emissions. After this, sources relating to the occupants dominated. On average about half of the VOC pollution originated from the building materials.