Comments on “Study and application of discharge calibration for submerged radial gates” by Guo X., Guo Y., Wang T., Fu H., Li J. Flow Meas. Instrum. 78 (2021) 101912, https://doi.org/10.1016/j.flowmeasinst.2021.101912

This paper discusses the capability of Guo et al.'s (2021) equations to determine the discharge of radial gates under submerged flow conditions. It was concluded that Guo et al.'s (2021) equations are associated with error reduction compared to the Incomplete Self-Similarity (ISS) theory and the calibration method. However, it does not have a significant advantage over Energy-Momentum (E-M) approach. Employing E-M principles, new equations were proposed to determine the discharge of radial gates, which has some advantages compared to Guo et al. (2021), such as (1) error reduction under partially and fully submerged flow conditions, (2) least dependence on the empirical constants, (3) uniformity of form over the entire submerged condition, and (4) no need to classify the submerged flow. Field calibration showed that the proposed equations in the present study for a single gate predict the discharge of parallel radial gates with a mean absolute error of less than 4.5% subject to the submerged operation of all open gates.     

An experimental study on the spray characteristics of pressure nozzle in a fluid bed granulation

The particles with a narrow size distribution are proper products in a fluid bed granulation and coating. As well, the process efficiency is one of the most important parameters, and the wall deposition of sprayed liquid reduces it. The modality of spray volume distribution is a key parameter in the definition of particle size distribution and process efficiency. This work is done in two steps: In the first step, an experimental study on spray characteristics including spray flux distribution, spray cone angle, and discharge coefficient is conducted. Based on the experimental data, the curves of liquid volume flux versus nozzle pressure and height are obtained. The results indicate that the flux distribution changes significantly with even small pressure and height changes. In the second step, the granulation process is carried out in a semi-industrial conical fluid bed, and the particles size distribution curves and the deposited mass on the bed wall are obtained. The results show that the precise determination of the spray flux distribution is an appropriate way to predict the well-advised nozzle pressure/height in order to achieve the narrow particle size distribution and high efficiency of the process.     

Performance evaluation of noise reduction method during on-line monitoring of MV switchgear for PD measurements by non-intrusive sensors

Partial Discharge (PD) measurement is a globally accepted method for insulation diagnosis of electrical assets. The consequences of insulation breakdown are well known. The trend is to move from conventional offline testing to online monitoring for insulation life prediction, which results in the inclusion of high frequency noise in the captured signals. Therefore de-noising is of paramount importance in online monitoring to obtain useful information from the signal.In this research, a 20 kV switchgear panel has been subjected to PD faults in the laboratory and measurements have been carried out by using different non-intrusive sensors including a novel sensor, the D-dot sensor and recorded by a high frequency oscilloscope. The measured results show the effective applicability of sensors for switchgear. The Discrete Wavelet Transform (DWT) has been used to de-noise PD signals in this paper. Time domain and frequency domain comparison of original and de-noised PD signals reveals the significance of this technique for online monitoring of Medium Voltage (MV) switchgear. Finally, an adaptive online de-noising concept, based on automatic de-noising is also proposed in this paper.     

Shape optimization of the cone body for the improved performance of the V-cone flowmeter: A numerical study

The present study has been carried out to optimize the shape of the cone body by providing a curved surface (the radius of curvature (R)) at the base of the cone element for improving the performance of the V-cone flowmeter using CFD. Radii of curvature of 20 mm (hemispherical, R/d = 0.5), 22 mm (R/d = 0.55) 25 mm (R/d = 0.625) and 27.62 mm (R/d = 0.6905) are taken in order to gradually reduce the arc length keeping the chord length constant. In addition a semi-elliptical based cone with 20 mm semi-major axis and10 mm semi-minor axis has also been investigated in the present study. The centre of the spheres and ellipse lie on the axis either in the frustum or cylindrical part of the cone. The equivalent diameter ratio (β) has been taken as 0.6 while three different fore-vertex angles (φ) namely 60°, 75° and 90° have been investigated. The Reynolds number has been varied in the range of 1 × 10³ to 1 × 10⁶. The results have been compared with the slant surface based cone. It is seen that introduction of a curved surface at the cone base has profound effect on the coefficient of discharge of the V-cone flowmeter. The coefficient of discharge is dependent on Reynolds number for the flowmeter with hemispherical and semi-elliptical based cone element. The coefficient of discharge is seen to be a weak function of Reynolds number for Re = 4000 and beyond for the other three curvatures. The cone flowmeter with a curved base cone of R/d equals to 0.55 has higher coefficient of discharge and smaller standard deviation compared to a device with an aft vertex cone.     

Weir velocity formulation for sharp-crested rectangular weirs

Discharge in open channels can be measured by sharp-crested rectangular weirs. Generally, measured head over the weir crest is substituted into an empirical formula derived from energy considerations to calculate the discharge. Assumptions made on the derivation are taken into account by defining a discharge coefficient that fits into the experimental data. In this study, a physical quantity, the average velocity over the weir section defined as ‘weir velocity’ is directly formulated as function of weir geometry and head over the weir. Weir velocity plotted against the weir head has a universal behavior for constant weir width to channel width ratio independent of the weir size. This unique behavior is described in terms of weir parameters to calculate the discharge without involving a discharge coefficient. Combining weir velocity data for variable weir widths provides a basis for direct formulation of discharge. The weir velocity exhibits simpler functional dependency on weir parameters in contrast to the discharge coefficient.     

变压器套管放电引起的爆炸冲击问题的三维数值仿真

本文中作者介绍了变压器套管放电过程,对放电过程中产生的能量进行了分析,并对放电过程进行了仿真计算,给出了计算结果。     

大深径比微小深孔超声电火花加工工艺研究

针对难加工材料的大深径比微小深孔加工这一工艺难题,设计并制造了基于工件振动的超声电火花复合加工装置。该装置包括一个已优化的压电振子和一台普通电火花机床。为提高加工效率,对压电振子进行了优化分析,使压电振子具有合适的纵振模态、固有频率和较大的振幅,压电振子中陶瓷片具有合理地安装位置。选择模具钢作为加工材料进行大深径比微小深孔的加工实验,比较研究了超声电火花复合加工装置和普通电火花机床加工大深径比微小深孔的加工效率。实验表明,超声电火花复合加工装置的加工效率更高。研究了超声激励电压、脉冲电流、脉冲宽度以及脉冲间隙等参数对大深径比微小深孔加工效率的影响,得出各参数较优的设置值。根据实验结果可以看出,超声电火花复合加工装置可以有效地加工出直径为0.5mm、深径比为60的微小深孔,适用于难加工材料的大深径比微小深孔加工。