Luminescent properties and LED Application of Broadband Near-Infrared Emitting NaInGe2O6: Cr3+ phosphors

A NIR-emitting Cr³⁺-activated phosphors (NaInGe₂O₆: Cr³⁺) covering whole NIR-I region (700–1200 nm) were successfully designed and prepared via solid-state reaction. XRD and Rietveld refinement verified that the octahedral In³⁺ site is the preferred site of Cr³⁺ substitution in NaInGe₂O₆ structure. The synthesized NaInGe₂O₆: Cr³⁺ phosphors exhibit two strong absorption bands at 480 and 700 nm, and show a mountain-like single-band emission at 900 nm with FWHM = 175 nm. The crystal field parameters are calculated using steady-state spectral data, in which a low Dq/B value of 1.89 is obtained and results in this broadband NIR emission. NaInGe₂O₆: Cr³⁺ exhibits good emission thermal stability, i.e. 55 % of room temperature intensity at 373 K. Besides, an efficient NIR pc-LED is fabricated and shows NIR output of 25.2 mW@120 mA. This broadband NaInGe₂O₆: Cr³⁺ NIR phosphor could be merged into pc-LED package for hand-held spectrometers, security cameras and vivo biomarkers.     

Separation of Indium from Acid Sulfate-Containing Solutions by Ion Exchange with Impregnated Resins

Indium separation using ion exchange resins from acidic polymetallic and very diluted solutions are investigated. Since the selectivity of commercial ion exchange resins have proven to be too low for an effective separation from solutions with high content of other metals, Lewatit® TP 208 was impregnated with common extractants to enhance its properties. By resin impregnation with D2EHPA and Cyanex 272, not only the selective indium recovery was reached but also the resin capacity was increased approx. two times. The best loading and elution performance were shown by Cyanex 272-impregnated Lewatit® TP 208, increasing the indium purity in the eluate from 0.75 % to 85 %.     

Preparation and characterization of single crystalline In2O3 films deposited on MgO (110) substrates by MOCVD

Epitaxial indium oxide (In₂O₃) films have been prepared on MgO (110) substrates by metal-organic chemical vapor deposition (MOCVD). The deposition temperature varies from 500 °C to 700 °C. The films deposited at each temperature display a cube-on-cube orientation relation with respect to the substrate. The In₂O₃ film deposited at 600 °C exhibits the best crystalline quality. A clear epitaxial relationship of In₂O₃ (110)|MgO (110) with In₂O₃ [001]|MgO [001] has been observed from the interface area between the film and the substrate. The average transmittance of the prepared films in the visible range is over 95%. The band gap of the obtained In₂O₃ films is about 3.55–3.70 eV.     

Ti-xCr-yCu钛基材料的制备及组织性能研究

研究了Al-Cu-Li-(0.35Mg)-(0.2In)合金的拉伸性能、时效析出相类型及其分布。T6峰时效时,Al-Cu-Li合金的时效析出相为T1(Al2CuLi)和?? (Al2Cu)相。添加0.2%In时,T6态时效早期形成许多方块状的立方相Al5Cu6Li2,且随时间延长其尺寸保持稳定;同时,可促进? ?相析出;相应合金的时效响应加速,强度提高。同时添加In和Mg可抑制Al5Cu6Li2相析出,但促进T1相析出。In和Mg的复合微合金化效果小于2050铝锂合金中Ag和Mg的复合微合金化效果,因而In+Mg复合微合金化铝锂合金T6态强度低于Ag+Mg复合微合金化的2050铝锂合金。T8态时效时,时效前预变形产生的位错抑制了In元素单独添加和In+Mg复合添加的微合金化效果。     

Organic light-emitting diodes fabricated on recessed anodes for light extraction enhancement

Circular recesses have been fabricated on indium tin oxide (ITO) anodes to enhance light extraction of organic light-emitting diodes (OLEDs). The effects of recess depth and recess coverage ratio on the performance of a green OLED were systematically investigated. Results showed that the current efficiency could be enhanced from 40.7 cd/A of a planar device to 47.2 cd/A of the device with a recess depth of 100 nm and a recess coverage ratio of 14.1%. The enhanced light extraction by the recess wall effect was realized to be the major factor leading to the improved efficiency. The efficiency is however limited by the accompanying increase in electrical resistivity of the ITO films at deep recesses and high recess coverage ratios. Despite of the insignificant efficiency enhancement (up to 16%) in this study, this recessed ITO approach provides a simple architecture to enhance waveguide mode light extraction without adding an internal medium.     

Recent advances in indium metallurgy: A review

The by-products of zinc refineries are used as the primary mineral resources for the commercial production of indium. The discarded LCDs containing adequate amount of indium is rather worth as its secondary resources compared to the by-products of zinc refineries. Mining and recycling rates of indium, respectively from minerals and waste LCDs are in progress to meet its huge demand. Recycling of the LCDs has been dominating over mining, as presently 480t of indium are produced annually from mining, however, that of 650t annually from recycling. Different aspects of the extractive metallurgy of indium are summarized in this review paper.     

P204-Cyanex 923磺化煤油用于铟的萃取和反萃研究

采用正交试验系统研究和对比了高原条件下P204磺化煤油和P204-Cyanex 923磺化煤油对铟的萃取和反萃条件。研究表明,适量添加Cyanex 923可在不影响萃取率的同时,降低有机相对铁的萃取;3 mol/L HCl+1 mol/L ZnCl2溶液对P204-Cyanex 923磺化煤油具有良好的反萃性能。     

含铟锡烟尘硫酸氧压浸出提铟试验

对含铟锡烟尘进行硫酸氧压浸出提铟试验。考察了各种因素对铟浸出效果的影响。结果表明,含铟物料在液固比4∶1,硫酸初始浓度150g/L,温度150℃,氧分压0.7MPa,时间150min的条件下进行氧压浸出,可获得93.66%的铟浸出率。     

铟的资源、应用与分离回收技术研究进展

本文系统介绍了稀散金属铟的储量、生产情况及其应用状况,重点介绍了国内外分离回收铟的工艺技术。针对不同来源的铟资源,分离回收方法也不同。文中对铅、锌冶炼系统中铟的回收及ITO靶材中铟的回收进行了总结,浸出料液中铟回收主要分为溶剂萃取分离、树脂交换分离、液膜萃取分离和中和沉淀等。文中还就铟资源的利用前景作了展望。