轧机两侧刚度差的数字化分析与改善措施

轧机两侧刚度差是轧机功能精度的最重要指标之一，以弹跳方程为基础定量计算了轧机两侧刚度差对轧制稳定性的影响，主要包括调平值、调平值随轧制力的变化以及甩尾3个方面。以此为基础在某热轧线建立了轧机刚度评价体系，对轧机功能精度进行管控。同时，还分析了轧机两侧刚度差的影响因素，并在定量分析的基础上采取了一系列的改善措施，包括衬板、垫片维护、最大压靠轧制力和标定轧制力的调整等，使轧机刚度和轧制稳定性得到大幅提升。     

基于有限元分析的强迫对流条件下开关柜温升特性研究

12kV大电流开关柜广泛用于配电网中,一般采取强迫对流的方式进行散热。为研究开关柜在强迫对流条件下的散热过程,基于有限元仿真技术,分别分析了强迫鼓风和抽风两种条件下开关柜的散热能力。通过对开关柜进行三维建模、热源计算和边界条件设立,仿真分析了开关柜在强迫鼓风和抽风条件下的温升分布及气流场分布情况,并与试验结果进行对比。结果表明,开关柜在两种强迫对流条件下散热效果均较好,温升符合国标温升要求,但不同的散热方式对开关柜温升和气流场分布影响较大。     

Evaluation of turbulent forced convection of non-Newtonian aqueous solution of CMC/CuO nanofluid in a tube with twisted tape inserts

The present paper investigates the turbulent flow and heat transfer of non-Newtonian aqueous solution of Carboxymethyl cellulose (CMC) and CuO nanoparticles in a plain tube and also tube with twisted tape inserts. The aqueous solution of CMC and CuO/CMC nanofluid show a shear-thinning (pseudo-plastic) rheological behavior, resulting in a higher viscosity than that of water. The consistency index and the power law index are evaluated based on available experimental data. The single phase approach with temperature dependent thermo-physical properties is applied to simulate the nanofluid flow and heat transfer. Simulation results are presented at different nanoparticle concentrations and twisted tape ratios. Only an axial flow is identified in the plain tube whereas both axial and swirl flows are detected in the tube with twisted tape inserts. The turbulence kinetic energy in the tube with twisted tapes is significantly higher than that in the plain one, which is useful for non-Newtonian fluid with higher viscosity. Also, the temperature fields in the tube with twisted tapes are disturbed relative to those in the plain one, due to stronger turbulence intensity and better fluid mixing. Higher amounts of nanoparticles concentration and lower twist ratios, giving maximum values of total efficiency, display the advantage of using non-Newtonian nanofluid in the tube with twisted tape inserts rather than non-Newtonian base fluid in the plain one.     

In situ efficiency of filters in residential central HVAC systems

High-efficiency filtration in residential forced-air heating, ventilation, and air conditioning (HVAC) systems protects equipment and can reduce exposure to particulate matter. Laboratory tests provide a measure of the nominal efficiency, but they may not accurately reflect the in situ efficiency of the filters because of variations in system conditions and changes in filter performance over time. The primary focus of this paper is to evaluate the effective filtration efficiency, which is inclusive of any loading and system impacts, in 21 occupied residential homes through in-duct concentration measurements. We considered the role of filter media by testing both electret and non-electret media, as well as the role of loading by considering new and used filters. The results show that filters with higher nominal efficiency generally had higher effective filtration efficiency in the same home. In terms of performance change, there is no significant difference in efficiency between initial and 3-month non-electret filters, but the efficiency of electret filters generally decreased over time. However, both nominal efficiency and performance change were vastly overshadowed by the wide variety in loading and system conditions across homes, making it hard to predict filter efficiency in a given home without in situ measurements.     

热仿真技术在加固显示器热设计中的应用

根据某型加固显示器的应用环境及内部功能模块的热特性,选择强迫风冷的散热方式,并通过热仿真计算指导风扇选型,根据仿真结果验证散热方案的可行性。最终,依据试验结果验证仿真结果的准确性,为加固显示器的热设计提供思路。     

An experimental study of forced convective heat transfer for fully developed Al 2 O 3 –water nanofluid in an annulus tube

Nanofluids have been known as practical materials to ameliorate heat transfer within diverse industrial systems. The current work presents an empirical study on forced convection effects of Al₂O₃–water nanofluid within an annulus tube. A laminar flow regime has been considered to perform the experiment in high Reynolds number range using several concentrations of nanofluid. Also, the boundary conditions include a constant uniform heat flux applied on the outer shell and an adiabatic condition to the inner tube. Nanofluid particle is visualized with transmission electron microscopy to figure out the nanofluid particles. Additionally, the pressure drop is obtained by measuring the inlet and outlet pressure with respect to the ambient condition. The experimental results showed that adding nanoparticles to the base fluid will increase the heat transfer coefficient (HTC) and average Nusselt number. In addition, by increasing viscosity effects at maximum Reynolds number of 1140 and increasing nanofluid concentration from 1% to 4% (maximum performance at 4%), HTC increases by 18%.     

电机横向布置液压牵引采煤机的改进

介绍了针对客户提出的改进要求,首次在采煤机上安装遥控装置及其组成和功能;在 摇臂上设计安装了强制润滑系统,改善了摇臂的润滑状况,改进设计后的采煤机除兼有横向布置采 煤机的优点外,还有较强的遥控功能。     

既有建筑的迫降纠倾

通过改变地基的原始应力状态,根据地质条件、工程对象的不同,介绍了基底掏土、井式、钻孔取土、堆载、人工降水、地基部分加固、浸水等七种迫降纠倾法,并对其各自的适用范围和施工中应注意的问题进行了阐述,为既有建筑的纠倾工作提供了参考依据。     

大型金属纤维燃气红外辐射板的研究

文章介绍了大型金属纤维燃气红外辐射板的结构、关键技术和试验方法，分析和总结了金属纤维的局部阻力系数和孔隙率、辐射板表面均匀性和辐射板燃烧工况等实验数据，为进一步研究、设计和应用金属纤维燃烧器打下了良好的基础。     

公共广播配线系统在实际工程中的应用

通过工程实例,对公共广播配线系统中二线制及三线制两种配线方式的特点及应用进行详细分析和比较,供同行设计时参考。