A Highly Sensitive,Reversible, and Bidirectional Humidity Actuator by Calcium Carbonate Ionic Oligomers Incorporated Poly(Vinylidene Fluoride)

Sensitivity and multi-directional motivation are major two factors for developing optimized humidity-response materials, which are promising for sensing, energy production, etc. Organic functional groups are commonly used as the water sensitive units through hydrogen bond interactions with water molecules in actuators. The multi-coordination ability of inorganic ions implies that the inorganic ionic compounds are potentially superior water sensitive units. However, the particle forms of inorganic ionic compounds produced by classical nucleation limit the number of exposed ions to interact with water. Recent progress on the inorganic ionic oligomers has broken through the limitation of classical nucleation, and realized the molecular-scaled incorporation of inorganic ionic compounds into an organic matrix. Here, the incorporation of hydrophilic calcium carbonate ionic oligomers into hydrophobic poly(vinylidene fluoride) (PVDF) is demonstrated. The ultra-small calcium carbonate oligomers within a PVDF film endow it with an ultra-sensitive, reversible, and bidirectional response. The motivation ability is superior to other bidirectional humidity-actuators at present, which realizes self-motivation on an ice surface, converting the chemical potential energy of the humidity gradient from ice to kinetic energy.     

Large Area Self-Assembled Ultrathin Polyimine Nanofilms Formed at the Liquid–Liquid Interface Used for Molecular Separation

Separation membranes with higher molecular weight cut-offs are needed to separate ions and small molecules from a mixed feed. The molecular sieving phenomenon can be utilized to separate smaller species with well-defined dimensions from a mixture. Here, the formation of freestanding polyimine nanofilms with thicknesses down to ≈14 nm synthesized via self-assembly of pre-synthesized imine oligomers is reported. Nanofilms are fabricated at the water–xylene interface followed by reversible condensation of polymerization according to the Pieranski theory. Polyimine nanofilm composite membranes are made via transferring the freestanding nanofilm onto ultrafiltration supports. High water permeance of 49.5 L m^-2 h⁻¹ bar⁻¹ is achieved with a complete rejection of brilliant blue-R (BBR; molecular weight = 825 g mol⁻¹) and no more than 10% rejection of monovalent and divalent salts. However, for a mixed feed of BBR dye and monovalent salt, the salt rejection is increased to ≈18%. Membranes are also capable of separating small dyes (e.g., methyl orange; MO; molecular weight = 327 g mol⁻¹) from a mixed feed of BBR and MO. Considering a thickness of ≈14 nm and its separation efficiency, the present membrane has significance in separation processes.     

Hydrolytic stability and protective properties of polyurethane oligomers based on polyester/ether/polyols

The present study deals with effect of the type and chemical character of incorporated polyester/polyether blocks on the hydrolytic stability of crosslinked polyurethane oligomers. Diffusion parameters of the investigated polyurethane oligomers, giving information concerning chemical changes taking place in neutral, basic and acidic aqueous environments, have also been determined.     

Fractionation of partially stereoregular poly(propylene oxide)

Partially stereoregular poly(propylene oxide) samples were synthesized via reactions catalysed by a preformed analytically defined trimethylaluminium hydrolysate. These samples were fractionated into two contrastingly different fractions.

1. (i) D-polymers: This fraction constituted the major part (up to 90%). It mainly contained cyclic low molecular weight oligomers (MW < 1000). The linear chains found in D-polymers had hydroxyl end groups. No double bonds could be detected spectroscopically.

2. (ii) K-polymers: This fraction was high molecular weight stereoregular polymer. Stepwise thermal precipitation from dilute isooctane solution of K-polymers yielded a succession of fractions which differed in melting point. It appears that the phase equilibria during the thermal precipitations were not controlled by the molecular weights of species.

Hydrosilylation and dehydrocondensation reactions of methylhydridesiloxane to acrylic and methacrylic acids

The hydrosilylation of α,ω‐bis(trimethylsiloxy) methylhydridesiloxane (degree of polymerization ≈ 53) with acrylic and methacrylic acid with various ratios of the initial compounds, in the presence of platinum hydrochloric acid, has been investigated. In the presence of platinum hydrochloric acid, competitive dehydrocondensation reactions take place with the formation of various oligomers with various chemical links. In the later stages of the reaction, three‐dimensional systems have been obtained. During dehydrocondensation, the reaction order, reaction rate constants, and activation energy have been determined. The structures of the synthesized oligomers have been determined with IR and NMR spectroscopy data. Gel permeation chromatography, differential scanning calorimetry, and X‐ray analyses of the synthesized oligomers have been carried out. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3243–3252, 2007     

Enzyme‐catalyzed hydrolysis of poly(ethylene terephthalate) cyclic trimer

Oligoesters present in poly(ethylene terephthalate) fibers are commonly extracted from the fiber during processing, such as aqueous‐based dyeing. Aqueous, insoluble oligoesters, particularly cyclic trimers that precipitate on processing machinery and on the fiber surface are difficult to remove under benign conditions. Reported is a new method for the efficient removal of cyclic trimer by enzyme‐catalyzed hydrolysis. Almost complete hydrolysis of trimer was accomplished at pH 8 and 60°C. Effects of time, agitation, surfactant, and enzyme and trimer concentrations on the efficiency of hydrolysis are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2545–2552, 2003     

Properties and crystallization kinetics of poly(ether ether ketone)‐co‐poly(ether ether ketone ketone) block copolymers

A series of block copolymers composed of poly(ether ether ketone) (PEEK) and poly(ether ether ketone ketone) (PEEKK) components were prepared from their corresponding oligomers via a nucleophlilic aromatic substitution reaction. Various properties of the copolymers were investigated with differential scanning calorimetry (DSC) and a tensile testing machine. The results show that the copolymers exhibited no phase separation and that the relationship between the glass‐transition temperature (T_g) and the compositions of the copolymers approximately followed the formula T_g = T_g1X₁ + T_g2X₂, where T_g1 and T_g2 are the glass‐transition‐temperature values of PEEK and PEEKK, respectively, and X₁ and X₂ are the corresponding molar fractions of the PEEK and PEEKK segments in the copolymers, respectively. These copolymers showed good tensile properties. The crystallization kinetics of the copolymers were studied. The Avrami equation was used to describe the isothermal crystallization process. The nonisothermal crystallization was described by modified Avrami analysis by Jeziorny and by a combination of the Avrami and Ozawa equations. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1652–1658, 2005     

One‐step synthesis and ring‐opening polymerization of novel macrocyclic(arylene multisulfide) oligomers

A series of macrocyclic(arylene multisulfide) oligomers were synthesized under high dilution conditions by reacting diphenyl ether/diphenyl/diphenyl disulfide/diphenyl methane with dichloro disulfide in the presence of a trace amount of iron powder by a one‐step reaction. From MALDI‐TOF mass spectra, it was established that the repeating units of the cyclization ranged from two to seven and the unit of macrocyclic(arylene multisulfide) oligomers had one to seven sulfur atoms. The macrocyclic oligomers readily underwent ring‐opening polymerization in the melt, resulting in linear, high molecular weight polymultisulfides. DSC thermograms demonstrated that the four polymultisulfides, derived from the macrocyclic(arylene multisulfide) oligomers, are amorphous in nature. The macrocyclic(arylene multisulfide) oligomers and polymers were analyzed by MALDI‐TOF‐MS, IR, HPLC, NMR, DSC, and TGA methods. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 735–741, 2004     

Oligomer and Polymer Formation in Hexamethylcyclotrisiloxane (D<Subscript>3</Subscript>) – Hydrosilane Systems Under Catalysis by tris(pentafluorophenyl)borane

Summary Reactions of hexamethylcyclotrisiloxane, D₃, with 1,1,3,3-tetramethyldisiloxane, ^HMM^H, 1,1,1,3,3-pentamethyldisiloxane, ^HMM, phenyldimethylsilane and phenylmethylsilane catalyzed by tris(pentafluorophenyl)borane were studied. These reactions lead to ring opening of D₃ by the SiH reactant producing open chain oligomers with hydrosilane functionality at one or both chain ends. The reactivity of the hydrosilanes toward D₃ decreases in the series: PhMeSiH₂ > ^HMM^H > PhMe₂SiH > ^HMM. Competitive self-oligomerization of ^HMM^H and ^HMM also occurs. Primary products of these processes are able to enter into reactions with the SiH and D₃ reactants; some also undergo cyclization. Thus, consecutive and competitive processes lead to a series of various oligohomologues. Gas chromatography in conjunction with chemical ionization mass spectroscopy permitted identification of structure and determination of the basic directions of these oligomerization processes. Polysiloxanes of higher molecular weight may be also formed in some of these systems. The reactions, which occur in the systems studied, are rationalized on the basis of the mechanism involving the hydride transfer from silicon to trivalent boron. This includes the transient formation of tertiary trisilyloxonium borate which decomposes by the hydride transfer to one of the silicon atoms of the trisilyloxonium center. Footnote: This paper is dedicated to Professor Ian Manners in recognition of his significant contributions to the field of organometallic polymers.     

Radical styrene polymerization in the presence of trace levels of sulfonic acids

The bulk polymerization of styrene in the presence of the vinyl functional sulfonic acid 2‐sulfoethylmethacrylate (SEM) was found to have utility for making polystyrenes with narrow polydispersity, bimodal polydispersity, and ultrahigh molecular weight at fast polymerization rates. Narrow polydispersity polymers were made by the addition of SEM to nitroxide‐mediated polymerizations. Bimodal polydispersity polymers were made by the ultrahigh molecular weight component being made in the presence of SEM in the absence of an initiator and the low molecular weight component being made in the presence of an initiator and/or chain‐transfer agent. Ultrahigh molecular weight monomodal polystyrenes were prepared at much faster polymerization rates than possible via spontaneous polymerization in the absence of SEM. SEM was found to be more effective, by an order of magnitude, than camphor sulfonic acid on a weight basis and, because it is copolymerized into the polymer chain, should not lead to corrosion problems during fabrication of the polymer. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 869–875, 2003