Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Bioinspired Triboelectric Soft Robot Driven by Mechanical Energy

A sustainable power source is a key technical challenge for practical applications of electrically responsive soft robots, especially the required voltage is over several thousand volts. Here, a practicable new technology, triboelectric soft robot (TESR) system with the primary characteristics of power source from mechanical energy, is developed. At its heart is TESR with bioinspired architectures made of soft-deformable body and two triboelectric adhesion feet, which is driven and accurately controlled through triboelectric effect, while reaching maximum crawling speeds of 14.9 mm s⁻¹ on the acrylic surface. The characteristics of the TESR, including displacement and force, are tested and simulated under the power of a rotary freestanding triboelectric nanogenerator (RF-TENG). Crawling of TESR is successfully realized on different materials surfaces and different angle slopes under the driven of RF-TENG. Furthermore, a real-time visual monitoring platform, in which TESR carries a micro camera to transmit images in a long narrow tunnel, is also achieved successfully, indicating that it can be used for fast diagnosis in an area inaccessible to human beings in the future. This study offers a new insight into the sustainable power source technologies suitable for electrically responsive soft robots and contributes to expanding the applicability of TENGs.     

Challenges in supply chain redesign for the Circular Economy: a literature review and a multiple case study

Despite companies face several challenges when redesigning their supply chain for the Circular Economy, the literature lacks a systematisation of such challenges and of the ways to overcome them. Through a systematic literature review, this paper identifies and systematises 24 challenges that may hamper a supply chain redesign for the Circular Economy. Sixteen among these challenges are well known from research in related topics. On the contrary, the remaining eight are relatively new or take a different relevance within the Circular Economy context. A multiple case study in the household appliance supply chain is carried out, to explore how these challenges appear in practice and how companies may tackle them. The cases analysed involve actors at different supply chain levels, and findings suggest that a great degree of vertical integration by one actor in the supply chain is not a necessary condition for Circular Economy implementation. The empirical study, in conjunction with the literature analysis, leads to the development of a framework linking the challenges to specific levers that companies may pursue to overcome them. The framework can be seen as a reference for managers undertaking the path towards Circular Economy.     

The circular economy of agro and post-consumer residues as raw materials for sustainable ceramics

The circular economy in the area of waste management implies their re-use as a raw material in different production cycles. Both the qualitative and quantitative characteristics of the residues from the agro sector and those of the products of the ceramics sector make possible to think of a feasible application. This review will illustrate some examples of recycling of residues deriving from animal and vegetable sectors (and two post consume products, spent coffee grounds, and packaging glass cullet), studied by the authors, falling within the concept of urban and agricultural sustainable development. Not only the most traditional products such as glass-ceramics, glazes, bricks, but also the most innovative lightweight aggregates for plant structures or in and out soil cultivation, as well as additives such as deflocculants for ceramic suspensions, which will be illustrated from the design/production, characterization, and comparison with commercial products.     

公民水素养评价表征因素模型构建与分析

针对我国水资源紧缺、水生态损害、水环境污染等相关水问题,以提升全民爱水惜水节水护水的意识和能力为目标,从水素养概念出发,通过扎根理论质性研究方法对公民水素养评价的表征因素进行筛选和提炼,最终得出包含水知识、水态度、水行为为主范畴的10个表征因素并运用解释结构模型(ISM)深入剖析各因素之间的内在联系。在此基础上建立了3级多层次递阶结构模型,进一步精确描述系统各要素两两之间的直接关系。结果表明:公民水素养评价的表征因素自上而下形成了表象层、中间层和根源层等3个层级,可直观、清晰地反映表征因素之间的递阶、层级关系;水态度在各表征因素中具有调节作用以及各表征因素之间存在内在逻辑关系。研究成果为提高公民水素养水平提供一定的科学依据和政策参考。     

覆岩隔离注浆充填技术在新义矿业的应用研究

为解决新义矿业地表村庄压煤问题，对该矿11090工作面实施覆岩隔离注浆填充不迁村技术。通过对注浆减沉原理进行分析，结合矿井地质条件，对相关参数进行预计，在对方案可行性、适用性进行判断的基础上，设计了完善的注浆填充技术方案，并对工程效果进行了预计。该技术可有效改善地表沉降现象，避免村庄的迁移，同时解放压煤资源，实现矿区可持续发展。     

基于亲生物理论的医疗空间色彩设计研究

人类在漫长的进化过程中形成了对自然的本能需求,亲生物设计从生物进化的角度以更系统和更合理的方法将自然重新融入现代建筑环境,构建人与场所之间的积极交互。源于光、水、风、植物、动物等自然元素的亲生物色彩设计具有令人愉悦的艺术感染力,动态的视觉效果暗示着蓬勃的生命力,能够系统、清晰地传递复杂的环境信息,引发观者的情感共鸣和情感依恋。从环境疗愈的角度看,具有亲生物特征的色彩设计对改善患者在医疗空间中的体验,激发患者的自我康复能力具有重要意义。亲生物设计是可持续发展设计中不可或缺的一环,两者的结合有助于创造兼具低环境影响和高情感联系的设计,以实现真正和持久的可持续性发展。     

Robust optimisation of sustainable food grain transportation with uncertain supply and intentional disruptions

The proliferating need for sustainability intervention in food grain transportation planning is anchoring the attention of researchers in the interests of stakeholders and environment at large. Uncertainty associated with food grain supply further intensifies the problem steering the need for designing robust, cost-efficient and sustainable models. In line with this, this paper aims to develop a robust and sustainable intermodal transportation model to facilitate single type of food grain commodity shipments while considering procurement uncertainty, greenhouse gas emissions, and intentional hub disruption. The problem is designed as a mixed integer non-linear robust optimisation model on a hub and spoke network for evaluating near optimal shipment quantity, route selection and hub location decisions. The robust optimisation approach considers minimisation of total relative regret associated with total cost subject to several real-time constraints. A version of Particle Swarm Optimisation with Differential Evolution is proposed to tackle the resulting NP-hard problem. The model is tested with two other state-of the art meta-heuristics for small, medium, and large datasets subject to different procurement scenarios inspired from real time food grain operations in Indian context. Finally, the solution is evaluated with respect to total cost, model and solution robustness for all instances.     

基于物联网的智慧林业可持续发展策略研究

随着我国科技的不断进步,在“互联网+”大数据的背景下,林业的智慧化发展是必经之路。虽然我国智慧林业的发展已经取得了一定的突破,但是仍然存在着许多问题。基于此,文章在物联网技术的基础上,对智慧林业的可持续发展策略进行探讨。