Stem Photosynthesis—A Key Element of Grass Pea (Lathyrus sativus L.) Acclimatisation to Salinity

Grass pea (Lathyrus sativus) is a leguminous plant of outstanding tolerance to abiotic stress. The aim of the presented study was to describe the mechanism of grass pea (Lathyrus sativus L.) photosynthetic apparatus acclimatisation strategies to salinity stress. The seedlings were cultivated in a hydroponic system in media containing various concentrations of NaCl (0, 50, and 100 mM), imitating none, moderate, and severe salinity, respectively, for three weeks. In order to characterise the function and structure of the photosynthetic apparatus, Chl a fluorescence, gas exchange measurements, proteome analysis, and Fourier-transform infrared spectroscopy (FT-IR) analysis were done inter alia. Significant differences in the response of the leaf and stem photosynthetic apparatus to severe salt stress were observed. Leaves became the place of harmful ion (Na⁺) accumulation, and the efficiency of their carboxylation decreased sharply. In turn, in stems, the reconstruction of the photosynthetic apparatus (antenna and photosystem complexes) activated alternative electron transport pathways, leading to effective ATP synthesis, which is required for the efficient translocation of Na⁺ to leaves. These changes enabled efficient stem carboxylation and made them the main source of assimilates. The observed changes indicate the high plasticity of grass pea photosynthetic apparatus, providing an effective mechanism of tolerance to salinity stress.     

鸭骨骼肌肌钙蛋白I单克隆抗体的制备及其特性

提取鸭骨骼肌肌钙蛋白I（skeletal muscle troponin I，sTnI）用于制备单克隆抗体，并对抗体性能进行 评价。将鸭骨骼肌提取后经十二烷基硫酸钠-聚丙烯酰胺凝胶电泳（sodium dodecyl sulfate polyacrylamide gel electropheresis，SDS-PAGE）测定，取凝胶条带免疫小鼠，融合后经筛选获得分泌抗鸭sTnI的杂交瘤细胞株，用 酶联免疫吸附测定法检测抗体效价、亚型及特异性等特性。结果表明：鸭骨骼肌提取物经SDS-PAGE后出现2 条 颜色较深的条带，取分子质量24 kDa条带用于免疫；筛选后获得2 株单克隆抗体，其中3E7特异性较好，效价在 1∶1.0×105以上，为IgG1亚型，亲和常数（Ka）为5.9×105 L/mol；免疫印迹结果显示，抗体3E7能与鸭骨骼肌提取 物反应，与牛、羊、鸡、鱼骨骼肌提取物无明显反应。     

The Impact of the ‘Mis-Peptidome’ on HLA Class I-Mediated Diseases: Contribution of ERAP1 and ERAP2 and Effects on the Immune Response

The strong association with the Major Histocompatibility Complex (MHC) class I genes represents a shared trait for a group of autoimmune/autoinflammatory disorders having in common immunopathogenetic basis as well as clinical features. Accordingly, the main risk factors for Ankylosing Spondylitis (AS), prototype of the Spondyloarthropathies (SpA), the Behçet’s disease (BD), the Psoriasis (Ps) and the Birdshot Chorioretinopathy (BSCR) are HLA-B*27, HLA-B*51, HLA-C*06:02 and HLA-A*29:02, respectively. Despite the strength of the association, the HLA pathogenetic role in these diseases is far from being thoroughly understood. Furthermore, Genome-Wide Association Studies (GWAS) have highlighted other important susceptibility factors such as Endoplasmic Reticulum Aminopeptidase (ERAP) 1 and, less frequently, ERAP2 that refine the peptidome presented by HLA class I molecules to CD8⁺ T cells. Mass spectrometry analysis provided considerable knowledge of HLA-B*27, HLA-B*51, HLA-C*06:02 and HLA-A*29:02 immunopeptidome. However, the combined effect of several ERAP1 and ERAP2 allelic variants could generate an altered pool of peptides accounting for the “mis-immunopeptidome” that ranges from suboptimal to pathogenetic/harmful peptides able to induce non-canonical or autoreactive CD8⁺ T responses, activation of NK cells and/or garbling the classical functions of the HLA class I molecules. This review will focus on this class of epitopes as possible elicitors of atypical/harmful immune responses which can contribute to the pathogenesis of chronic inflammatory diseases.     

聚乙烯醇/牛I型胶原支架材料的制备及评价

研究了一种聚乙烯醇(PVA)和胶原(COL)复合支架材料的制备方法。采用氨基硅烷对PVA海绵表面进行了氨基化修饰后，通过戊二醛溶液交联牛Ⅰ型胶原(COL)，最后通过赖氨酸溶液封闭，获得一种PVA/COL复合支架材料。采用扫描电镜(SEM)、X光电子能谱仪(XPS)、傅里叶红外光谱(FT-IR)等手段对支架材料的理化性能进行表征，并通过细胞实验对支架材料的生物学性能进行评价。结果表明，经过COL修饰的PVA孔隙率为21.33%，平均孔径为168.68 ?m且均匀分布，支架材料接触角为20.03°。对支架材料的生物学评价结果表明C3A细胞在复合材料上黏附良好，优于PVA组；CCK-8增殖检测结果表明细胞在复合材料上呈增殖生长趋势，与对照组PVA相比差异显著(P?0.01)。将PVA和COL复合制备得到的支架材料具有良好的理化及生物学特性，具有广阔的应用前景。     

Application of adhesively bonded single lap joints for fracture assessment of adhesive materials

In this study, a method has been proposed to obtain the failure envelope of brittle adhesives using the experimental failure loads of precracked single lap joints (SLJs). The proposed technique is based on the principles of linear elastic fracture mechanics (LEFM), on J-integral relations, and on results of a numerical analysis. Compared to the previous approaches, the introduced experimental method has some advantages such as low manufacturing costs and simpler test procedure. The proposed method can also provide a wide range of mode mix ratios without the need of an additional apparatus. The fracture envelope obtained from the proposed method was then verified by performing some fracture tests including double cantilever beam (DCB), end-notched flexure (ENF), and single leg bending (SLB) specimens. Good correlation was seen between the fracture envelopes of the proposed method and the ones obtained from the fracture mechanics experiments.     

Investigation on the mechanism of charge generation in organic heterojunctions: Analysis of I–V and C–V characteristics

The charge generation mechanism of organic heterojunction (OHJ) consisted of 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile (HAT-CN) and different hole transporting materials (HTMs) are studied systematically by current-voltage (I–V) and capacitance-voltage measurements. The analysis of I–V characteristics of the devices based on OHJs at forward and reverse voltages by comparing the thickness of HTM layers finds that a forward and reverse symmetrical I–V curve is observed at thin HTM layers and the forward current becomes larger than the reverse current with the increase of HTM thickness, fully illustrating the effectiveness of OHJ charge generation. Moreover, the I–V characteristics at different temperatures indicate that the efficient charge generation is originated from electron tunneling rather than diffusion. And the C–V and capacitance-frequency (C–F)characteristics further illustrate the highly efficient charge generation ability of OHJs so that the charge density is as high as 4.5 × 10¹⁷ cm⁻³, guaranteeing the high conductivity of OHJs, which is very beneficial to developing highly efficient OLEDs using OHJs as charge injector and generator.     

Utilization of coordinating green solvents for high quality methylammonium bismuth iodide thin films for photovoltaic applications

Photovoltaic performances of the bismuth-based solar cells are profoundly affected by the thin film quality of the photoactive layer. Herein, we report on various green solvent system to obtain the highly crystalline, pinhole free and homogeneously methylammonium bismuth iodide (MBI) active layer. The MBI structure prepared with tetrahydrofuran:2-ethoxy-ethanol (THF-2ETO) solvent system was found to have the best film quality. Adding 0.05 M 2ETO as the co-solvent is sufficient to produce high quality BiI₃ and MBI thin films. According to the X-ray photoelectron spectroscopy (XPS) analyzes, we have demonstrated that there is an interaction between BiI₃ and 2ETO according to the concentration of 2ETO added to the main THF. Our study clarifies the importance of THF-2ETO solvent system that can accelerate the evolution of the Bi-based solar cells by creating high-quality BiI₃ or MBI thin films.     

Prediction of mode I fracture toughness of rock using linear multiple regression and gene expression programming

Prediction of mode I fracture toughness (K_IC) of rock is of significant importance in rock engineering analyses. In this study, linear multiple regression (LMR) and gene expression programming (GEP) methods were used to provide a reliable relationship to determine mode I fracture toughness of rock. The presented model was developed based on 60 datasets taken from the previous literature. To predict fracture parameters, three mechanical parameters of rock mass including uniaxial compressive strength (UCS), Brazilian tensile strength (BTS), and elastic modulus (E) have been selected as the input parameters. A cluster of data was collected and divided into two random groups of training and testing datasets. Then, different statistical linear and artificial intelligence based nonlinear analyses were conducted on the training data to provide a reliable prediction model of K_IC. These two predictive methods were then evaluated based on the testing data. To evaluate the efficiency of the proposed models for predicting the mode I fracture toughness of rock, various statistical indices including coefficient of determination (R²), root mean square error (RMSE), and mean absolute error (MAE) were utilized herein. In the case of testing datasets, the values of R², RMSE, and MAE for the GEP model were 0.87, 0.188, and 0.156, respectively, while they were 0.74, 0.473, and 0.223, respectively, for the LMR model. The results indicated that the selected GEP model delivered superior performance with a higher R² value and lower errors.     

Controllable Image‐Based Transfer of Flow Phenomena

Modelling flow phenomena and their related weathering effects is often cumbersome due their dependence on the environment, materials and geometric properties of objects in the scene. Example‐based modelling provides many advantages for reproducing real textures, but little effort has been devoted to reproducing and transferring complex phenomena. In order to produce realistic flow effects, it is possible to take advantage of the widespread availability of flow images on the Internet, which can be used to gather key information about the flow. In this paper, we present a technique that allows the transfer of flow phenomena between photographs, adapting the flow to the target image and giving the user flexibility and control through specifically tailored parameters. This is done through two types of control curves: a fitted theoretical curve to control the mass of deposited material, and an extended colour map for properly adapting to the target appearance. In addition, our method filters and warps the input flow in order to account for the geometric details of the target surface. This leads to a fast and intuitive approach to easily transfer phenomena between images, providing a set of simple and intuitive parameters to control the process.     

Copper(I) selenophene-2-carboxylate (CuSC) promoted C–S cross-coupling reaction of thiols with aryl iodides

We reported the synthesis of copper (I)-selenophene-2-carboxylate (CuSC) and application as new catalyst in the cross-coupling reactions of thiols with aryl iodide to afford the corresponding unsymmetrical thioethers. The optimized reaction conditions were applied to thiols and aryl iodides having a wide range of functional groups, including electron rich and electron poor substrates. The chemoselectivity of the reaction with 4-iodobromobenzene and 2-aminothiophenol derivatives was briefly examined through the competitive iodine versus bromine and thiol versus nitrogen cross-coupling.