基于WebGL的3D立库可视化系统设计与实现

针对当前扩大化和普及化的仓储物流,提出了一种3D自动化立体仓库可视化系统的实现方案,用以解决仓储系统中遇到的数据不直观的问题。该系统采用JavaScript编程语言,以Three.js引擎为基础,构建了基于WebGL的三维自动化立体仓库的可视化系统,该系统能有效直观的进行仓储管理,适合现代化仓储企业的管理需求。     

3S技术应用现状与发展趋势

3S技术出现至今,已在诸多领域成功运用并产生了巨大的价值。文章简单介绍了3S三大组成部分:GIS、RS、GNSS的基本概念,分析了3S技术目前在农业、生态环境监测、土地资源管理以及智慧城市方面的应用现状以及对其在该方面未来的发展趋势进行展望。最后对目前3S在应用中遇到的一些问题进行了探讨,给未来3S技术的发展提供一些参考。     

Analysis based on EU Regulation No 517/2014 of new HFC/HFO mixtures as alternatives of high GWP refrigerants in refrigeration and HVAC systems

The EU Regulation No 517/2014 is going to phase-out most of the refrigerants commonly used in refrigeration and air conditioning systems (R134a, R404A and R410A) because of their extended use and their high GWP values. There are very different options to replace them; however, no refrigerant has yet imposed. In this paper we review and analyze the different mixtures proposed by the AHRI as alternative refrigerants to those employed currently. These mixtures are composed by HFC refrigerants: R32, R125, R152a and R134a; and HFO refrigerants: R1234yf and R1234ze(E). It is concluded, from the theoretical analysis, that most of the new HFO/HFC mixtures perform under the HFC analyzed (although some experimental studies show the contrary) and, in most cases, do not meet the GWP restrictions approved by the European normative. Furthermore, some of the mixtures proposed would have problems due to their flammability.     

An experimental investigation of refrigerant mixture R32/R290 as drop-in replacement for HFC410A in household air conditioners

In the present paper, the refrigerant mixture R32/R290 (68%/32% by weight) is investigated as the drop-in replacement for R410A in household air conditioners. The GWP of it is only 22% of that of R410A. Theoretical and experimental investigations are conducted on the performance of the air conditioners working with both R32/R290 and R410A. Experimental results show that the refrigerant charge amount of R32/R290 is reduced by 30.0%–35.0%; the cooling and heating capacities are increased by 14.0%–23.7%. For further reducing charge amount and flammability, the micro-channel heat exchanger (condenser) is employed to replace the finned tube one. Compared with the R32/R290 system using finned tube heat exchanger, the R32/R290 charge amount and the power consumption are reduced by 34.1% and 0.4%, respectively; the cooling capacity and the COP are increased by 6.4% and 6.8%, respectively.     

Refrigerant charge reduction in vapor compression refrigeration cycles via liquid-to-suction heat exchange

This short communication reports a study of the potential for refrigerant charge reduction in vapor compression refrigeration systems by means of a liquid-to-suction heat exchanger. The analysis was carried out on purely thermodynamic grounds for refrigerants of current interest, such as R134a, R22, R290, R600a and R717, assuming the cooling capacity as a constraint so that the evaporating pressure is free to vary. It was found that the minimum amount of refrigerant can be reduced depending on the thermophysical properties of the refrigerant, the working conditions, and the charge inventory.     

Development and validation of a micro-fin tubes evaporator model using R134a and R1234yf as working fluids

This paper presents a model of shell and tube evaporator with micro-fin tubes using R1234yf and R134a. The model developed for this evaporator uses the ε-NTU method to predict the evaporating pressure, the refrigerant outlet enthalpy and the outlet temperature of the secondary fluid. The model accuracy is evaluated using different two-phase flow boiling correlations for micro-fin tubes and comparing predicted and experimental data. The experimental tests were carried out for a wide range of operating conditions using R134a and R1234yf as working fluids. The predicted parameter with maximum deviations, between the predicted and experimental data, is the evaporating pressure. The correlation of Akhavan– Behabadi et al. was used to predict flow boiling heat transfer, with an error on cooling capacity prediction below 5%. Simulations, carried out with this validated model, show that the overall heat transfer coefficient of R1234yf has a maximum decrease of 10% compared with R134a.     

Regenerated air cycle potentials in heat pump applications

Air (reversed Brayton) cycle has been utilized in the area of refrigeration and cryogenics for several decades, but its potentials in heat pump applications were longtime underestimated. In this paper, a thermodynamic model for the regenerated air heat pump cycle with practical compressor, expander and regenerated heat exchanger was developed. Based on the model, the relations between the system performance and the operating parameters were analyzed. The optimal heating COP (coefficient of performance) and the corresponding pressure ratio were derived. Then, air heat pump cycles (regenerated cycle and basic cycle) and vapor-compression heat pump cycles (CO₂ trans-critical cycle and R410A subcritical cycle) were numerically compared. The results indicated that the regenerated air heat pump cycle not only gets the heating capacity in line with the heating load under different operating conditions but also achieves higher COP over trans-critical CO₂ heat pump cycle in applications of large temperature difference.     

Maldistribution in air–water heat pump evaporators. Part 1: Effects on evaporator,heat pump and system level

This paper presents an approach to quantify the effect of evaporator maldistribution on operating costs of air–water heat pumps. In the proposed simulation model maldistribution is induced by two parameters describing refrigerant phase and air flow distribution. Annual operating costs are calculated based on heat pump performance at distinct operating conditions. Results show that percentage increase of operating costs is similar for the three considered climate zones, even though the effect of maldistribution on heat pump performance varies with operating conditions. Differences in terms of absolute cost increase for the climate zones arise mainly due to a varying number of operating hours. Absolute cost increase is considerable in the average and especially colder climate zone and can only partly be reduced by enlarging the evaporator.     

Experimental study on the heat transfer and flow characteristics of nanorefrigerants inside a corrugated tube

The heat transfer and flow characteristics of MWCNT-R141b nanorefrigerant with different mass fractions have been studied through experiments. Experimental results were compared with existing correlations. A two-step method was used to prepare the nanorefrigerants. Span-80 was used as surfactant with an average particle diameter of 20 nm. Transmittance method was used to evaluate the stability of nanorefrigerants. Results showed that the stability of MWCNT-R141b nanorefrigerant, which is the added dispersant, was good during the experiments. The 0.3 wt% MWCNT-R141b nanorefrigerants had optimal heat transfer enhancement effects compared with pure refrigerants. The maximum Nusselt number increased by 40%. The specific pressure drop of nanorefrigerant increased as the Reynolds number (Re) increased, and the specific pressure drop of the pure refrigerant was minimum, which is similar to R141b.     

航空物探遥感地质资料定密工作初探与实践

在地质调查信息化与地质资料社会化服务工作不断发展的背景下,航空物探遥感地质资料的开发利用与保密管理工作矛盾日益凸显。本文以航空物探遥感资料定密为研究重点,总结了地质、测绘地理信息、海洋等工作领域的定密工作情况,基于对航空物探遥感地质资料分类结果提取了共性资料涉密要素/事项,根据保密法规的相关规定与要求,初步建立了以比例尺/空间精度、测绘地理信息要素、航空物探遥感专业要素为主的定密判定要素集,提出了航空物探遥感地质资料的定密工作原则与参考准则,以期为航空物探遥感地质信息共享服务提供必要的工作支撑。