饱和块状混合回填土地基的一维固结分析

用块状渣土置换软弱地基和回填低洼谷地等是处置工程渣土的有效途径。为了分析饱和块状混合回填土地基的固结性状，运用混合物理论建立了其一维固结模型。首先，假定块状土固相和充填土固相之间满足等应变条件，获得了饱和块状混合回填土中各相应变与块状土孔隙变形和充填土孔隙变形的关系式。其次，在小应变条件下，根据自由能势函数方程建立了饱和块状混合回填土的一维线弹性本构方程，再结合达西定律和应力平衡方程获得了一维固结控制方程。再次，利用分离变量法得到一维固结解析解，通过退化本文模型与已有模型进行对比，验证了本文模型的正确性。最后，基于所得解析解，分析了充填土孔隙渗透系数、块状土孔隙渗透系数以及流体交换参数等因素对饱和块状混合回填土地基固结性状的影响。分析结果表明：充填土孔隙渗透系数对饱和块状混合回填土地基整体固结性状起主导作用；在固结初期，块状土超孔压会有一定程度的上升，且3个参数具有相似的作用机理。     

Analytical Modeling for Translating Statistical Changes to Circuit Variability by Ultra-Deep Submicron Digital Circuit Design

This paper presents a physics-based compact gate delay model that includes all short-channel phenomena prevalent at the ultra-deep submicron technology node of 32 nm. To simplify calculations, the proposed model is connected to a compact α-power law-based (Sakurai-Newton) model. The model has been tested on a wide range of supply voltages. The model accurately predicts nominal delays and the delays under process variations. It has been shown that at lower technology nodes, the delay is more sensitive to threshold voltage variations, specifically at the sub-threshold operating region as compared with effective channel length variations above the threshold region.     

Human DDX17 Unwinds Rift Valley Fever Virus Non-Coding RNAs

Rift Valley fever virus (RVFV) is a mosquito-transmitted virus from the Bunyaviridae family that causes high rates of mortality and morbidity in humans and ruminant animals. Previous studies indicated that DEAD-box helicase 17 (DDX17) restricts RVFV replication by recognizing two primary non-coding RNAs in the S-segment of the genome: the intergenic region (IGR) and 5′ non-coding region (NCR). However, we lack molecular insights into the direct binding of DDX17 with RVFV non-coding RNAs and information on the unwinding of both non-coding RNAs by DDX17. Therefore, we performed an extensive biophysical analysis of the DDX17 helicase domain (DDX17_135–555) and RVFV non-coding RNAs, IGR and 5’ NCR. The homogeneity studies using analytical ultracentrifugation indicated that DDX17_135–555, IGR, and 5’ NCR are pure. Next, we performed small-angle X-ray scattering (SAXS) experiments, which suggested that DDX17 and both RNAs are homogenous as well. SAXS analysis also demonstrated that DDX17 is globular to an extent, whereas the RNAs adopt an extended conformation in solution. Subsequently, microscale thermophoresis (MST) experiments were performed to investigate the direct binding of DDX17 to the non-coding RNAs. The MST experiments demonstrated that DDX17 binds with the IGR and 5’ NCR with a dissociation constant of 5.77 ± 0.15 µM and 9.85 ± 0.11 µM, respectively. As DDX17_135–555 is an RNA helicase, we next determined if it could unwind IGR and NCR. We developed a helicase assay using MST and fluorescently-labeled oligos, which suggested DDX17_135–555 can unwind both RNAs. Overall, our study provides direct evidence of DDX17_135–555 interacting with and unwinding RVFV non-coding regions.     

计及RSC控制的DFIG短路电流直流分量解析表达

现有文献针对计及转子变流器(RSC)控制的双馈感应风电机组(DFIG)定子短路电流解析表达,将定子磁链当作一阶直流衰减分量或忽略功率外环控制。基于DFIG电压、磁链和RSC控制方程,得到定子电流关于定子电压和定子功率的传递函数,提出定子电流的精确解析表达式。基于RSC内、外环PI参数关系,推导直流分量衰减时间常数和角频率关于PI参数的表达式。分析了RSC内外环PI参数对定子电流直流衰减分量的影响。仿真结果验证了解析表达式的准确性,为PI参数选取和保护装置测量、整定提供依据。     

带权决策表的属性约简

属性约简是粗糙集理论的重要应用。考虑将决策表中的每行都作为一条决策规则时，若把表中出现相同决策规则的次数作为权，可得到带权决策表。提出了关于带权决策表的正域约简相应的辨识矩阵并给出了证明，从而得到了约简算法。相比于决策表中的正域约简时发现，通过将决策表转化为带权决策表后，再利用算法1进行约简时，其在一定程度上优于前者。提出了近似分类精度约简相应的辨识矩阵并给出了证明。对于2个算法，在选取的UCI数据集上进行了实验验证。通过实验进一步说明了所提出算法的可行性和有效性。     

南极磷虾中氟的赋存形态及分析方法研究进展

南极磷虾资源储量巨大,营养价值丰富,但富氟问题是其在食品开发利用领域的"瓶颈"。如何选取合适的前处理方法以及快速、准确检测南极磷虾中的不同形态的氟含量成为亟需解决的关键问题。该文系统阐述国内外文献报道的南极磷虾及其产品中氟的赋存形态、氟的前处理方式、氟的分析检测方法,旨在为开发高精密度、高灵敏度的南极磷虾中氟化物的检测技术法提供参考价值。     

压裂水平井产能预测方法研究进展

水平井压裂技术在低渗透及非常规储层中得到了广泛应用,压裂后水平井的产能预测关系到油田开发方案的制定,因此,国内外学者对压后渗流模型的建立和求解方法做出了不懈的努力。本文详细回顾了国内外学者所建压裂水平井产能预测模型及求解方法,指出了不同模型和求解方法的优缺点,并展望了压裂水平井产能模型的发展方向。     

基于大数据分析的分布式MOLAP技术研究

在计算机系统运行以及研究环节中,会存在大量的规模效应,此类状况难以避免,要想有效解决此类问题,就需要利用分布式的处理方式,开展对文件系统的分析。文章对分布式多维联机分析过程(MOLAP)的数据模型进行了分析,从维编码的算法、映射归约(MapReduce)算法的实现、分析维的遍历算法等方面作深入探讨。     

Value stream mapping approach and analytical network process to identify and prioritize production system’s Mudas (case study: natural fibre clothing manufacturing company)

The current research has been done to identify and prioritize the Mudas of the production line of a natural fibre clothing manufacturing company; in this way, value stream mapping has been used to identify the Mudas, then analytical hierarchy method has been used to screen the Mudas. In the first step, necessary information to design value stream of production process has been obtained by observation, measurement and interview; afterward, according to the obtained information and by forming a focus group, Mudas in the production line have been identified and prioritized according to seven categories of Mudas. In order to prioritizing the Mudas by the usage of analytical hierarchy method, the Super Decision software has been applied. Then, according to the obtained priorities, suggested map of the future value system has been drawn and some suggestions have been presented to eliminate Mudas and move towards the lean manufacturing.