Green Measurements for Software Product Based on Sustainability Dimensions

Software is a central component in the modern world and vastly affects the environment’s sustainability. The demand for energy and resource requirements is rising when producing hardware and software units. Literature study reveals that many studies focused on green hardware; however, limited efforts were made in the greenness of software products. Green software products are necessary to solve the issues and problems related to the long-term use of software, especially from a sustainability perspective. Without a proper mechanism for measuring the greenness of a particular software product executed in a specific environment, the mentioned benefits will not be attained. Currently, there are not enough works to address this problem, and the green status of software products is uncertain and unsure. This paper aims to identify the green measurements based on sustainable dimensions in a software product. The second objective is to reveal the relationships between the elements and measurements through empirical study. The study is conducted in two phases. The first phase is the theoretical phase, where the main components, measurements and practices that influence the sustainability of a software product are identified. The second phase is the empirical study that involved 103 respondents in Malaysia investigating current practices of green software in the industrial environment and further identifying the main sustainability dimensions and measurements and their impact on achieving green software products. This study has revealed seven green measurements of software product: Productivity, Usability, Cost Reduction, Employee Support, Energy Efficiency, Resource Efficiency and Tool Support. The relationships are statistically significant, with a significance level of less than 0.01 (p = 0.000). Thus, the hypothesised relationships were all accepted. The contributions of this study revolve around the research perspectives of the measurements to attain a green software product.     

Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

旗袍三围规格的优化设计研究

旗袍需要拥有合身的廓形,贴体程度要求高且强调人体曲线美感,而旗袍的松量设计直接影响其外观造型的优美程度及穿着舒适感。文章首先采用正交实验法针对相同款式旗袍设计了9种不同水平组合的三围松量设置方案,并制作成相同款式不同三围规格的旗袍样衣;然后利用心理学标尺,对9件旗袍样衣的静态造型和穿着舒适感分别进行主观评价,并利用直观分析法和方差分析法综合分析主观评价结果;最后对分析结果进行验证,最终找出外观造型优美程度高和穿着舒适感佳的三围松量水平组合,为旗袍三围规格的优化设计提供理论依据。     

Theoretical and experimental studies of a new aniline derivative corrosion inhibitor for mild steel in acid medium

4-Chloro-N-(pyridin-2-ylmethyl)aniline (CPYA) was synthesized by a simple and inexpensive method and tested as a corrosion inhibitor in acid medium for mild steel by using gravimetric studies and electrochemical measurements. An average maximum efficiency of 96.0% was achieved at 4.59 mmol/L. Corrosion kinetic and thermodynamic parameters were also analyzed. Surface analyses (atomic force microscopy and scanning electron microscopy) show that protection is enabled by adsorption on the metal, forming a film. Quantum chemical calculations were performed to access information regarding the molecular structure in the corrosive medium and to support interpretation of the results obtained by experimental methods.     

Optical spectroscopic and electrochemical characterization of oxide films on a ferritic stainless steel

Colored oxide films that form on ferritic stainless steel in a high-temperature, oxidizing environment and correspond to different chemical compositions can cause a deterioration of pitting resistance and corrosion performance. Herein, optical spectroscopic and electrochemical techniques have been used to reveal the relationship between color, chemical composition, and corrosion resistance of oxide films formed in the temperature range from 400°C to 800°C for 30 min and at 800°C for 10, 20, 30, and 60 min. The substrate with a thin and dense passivation film leads to a low pitting potential but high corrosion resistance. Oxide films of yellowish or brownish color formed below 600°C are mainly iron oxides, which correspond to low corrosion resistance. No passivation characteristics can be observed for polarization curves of oxide films formed at 500°C and 600°C. The color of oxide films varies from blue to dark gray with the increase of oxidation time at 800°C. Corrosion resistance changes with different proportions of Fe₃O₄, Cr₂O₃, and FeCr₂O₄. The gray oxide films formed at 800°C for 30 min exhibit the lowest pitting susceptibility and the highest corrosion resistance.     

超临界CO2环境中温度和流速对N80碳钢腐蚀行为的影响

目的研究超临界CO2环境中温度和流速对N80碳钢腐蚀行为的影响,探讨N80碳钢在超临界CO2环境中的腐蚀机制。方法利用高压釜进行失重和电化学测试,同时利用扫描电子显微镜(SEM)和X射线衍射仪(XRD)进行腐蚀形貌观察和腐蚀产物成分分析。结果当温度为40℃时,腐蚀速率最小,电化学阻抗随时间延长持续减小,此条件下并没形成FeCO3保护膜。升高温度导致腐蚀初期的腐蚀速率明显增大,然而腐蚀某个时刻后,电化学阻抗突然增大,意味着FeCO3保护膜的形成。温度越高,腐蚀24 h后的阻抗越大,产物膜越致密,保护性越好。另外,腐蚀失重速率随流速的增加而增大,电化学测试也表明流速越大,阻抗越小,腐蚀电流密度越大。SEM形貌分析表明,流体流动破坏了FeCO3膜的致密度,降低了其对N80碳钢基体的保护作用。结论尽管升高温度加速了N80碳钢的腐蚀,但却有利于保护性FeCO3膜的形成。温度越高,FeCO3膜越致密。流体流动破坏了保护性FeCO3膜的致密性,加速了N80碳钢腐蚀。