激光脉冲编码抗有源干扰效果研究

激光脉冲编码是激光制导武器的抗干扰措施之一。角度欺骗式干扰和高重频干扰是目前半主动激光制导武器的主要有源干扰来源。为研究不同激光脉冲编码方式对激光半主动制导武器抗这两种干扰性能的影响,本文针对敌方激光告警机的识别算法与我方导引头的解码过程,提出自相关函数与归一化互相关函数评价方法,并对目前主要编码方式进行仿真,仿真结果表明:激光脉冲编码的抗角度欺骗式干扰能力受编码序列周期性与脉冲间隔随机性的影响；抗高重频激光干扰能力受编码序列脉冲间隔随机性的影响；LFSR状态码的抗角度欺骗式干扰与抗高重频干扰效果均优于其他编码方式。     

一种低信噪比环境下的语音端点检测算法

端点检测技术是语音信号处理的关键技术之一，为提高低信噪比环境下端点检测的准确率和稳健性，提出了一种非平稳噪声抑制和调制域谱减结合功率归一化倒谱距离的端点检测算法。该算法首先通过抑制非平稳噪声再采用调制域谱减消除残余噪声来提升信噪比，减少语音失真。然后再提取每帧信号的功率归一化倒谱系数，计算每帧信号与背景噪声的功率归一化倒谱距离。最后将该倒谱距离作为检测参数，采用双门限判决方法进行端点检测。实验结果表明，该端点检测算法对语音帧和噪声帧具有较好的区分性。此外，在低信噪比环境下，所提出的算法对于不同类型的噪声都具有较好的稳健性。     

汉江上游干支流沉积物细菌群落多样性和影响因素

为了解汉江上游干支流沉积物细菌多样性以及确定性过程和随机性过程在沉积物细菌群落构建过程中的相对重要性,基于Illumina高通量测序技术,分析了环境因子对细菌群落组成的影响,采用非度量多维尺度(NMDS)排序探究了季节之间沉积物细菌群落的差异,并结合中性群落模型和标准化随机率量化了确定性过程和随机过程对群落构建的影响。结果表明:汉江上游及其支流细菌群落主要由变形菌门(Proteobacteria)、拟杆菌门(Bacteroidetes)、蓝藻门(Cyanophyta)、浮霉菌门(Planctomycetes)和酸杆菌门(Acidobacteria)等组成；细菌群落在不同季节有显著差异；地理距离和环境因子对细菌群落结构影响较小,确定性过程并未在细菌群落组成中起到主导作用；随机过程很大程度上影响了群落在秋季和春季的组成,是沉积物细菌群落构建的主导因素。     

基于修正关口-太田模型的归一化#br# 变形量开挖边坡失稳判据

由于普通土体本构模型不能反应土体初始应力状态及开挖应力路径,在进行有限元计算时得到的特征点位移也会与工程实际有偏差。选用可以对开挖前边坡土体的初始K0应力状态以及开挖应力路径进行合理描述的修正关口太田模型,对开挖边坡进行有限元计算。根据位移突变判据,采用单因素敏感性分析,对54例简单边坡进行有限元计算,得出与边坡位移量呈正、负关联的基本参量。利用灰色关联分析方法,首次同时考虑了土坡几何参数、物理参数、本构模型等基本参数,将边坡的变形量进行归一化处理,构建以变形量为基础的归一化失稳判据Fu及警戒位移值U′1,从而可以通过实时监控边坡位移及时给出滑坡体的安全性评价。     

土体热传导性能及其热导率模型研究

为研究不同土体的热传导特性变化规律,利用热探针测试了南京地区典型土体在不同含水量和干密度状态下的热阻系数,分析了含水量、干密度、饱和度以及矿物成分等因素对土体热阻系数的影响,研究了不同状态下土体热导率的预测模型,提出了适用于不同地区土体热阻系数估算的修正系数.结果表明:南京地区典型土体的热阻系数随含水量和干密度增加而减小,当含水量超过一定范围后,热阻系数趋于稳定;热阻系数与饱和度之间的关系表现出与其含水量之间相似的变化规律;土颗粒的热传导特性由其矿物成分决定,石英含量对土颗粒热传导特性有着显著影响;提出了可用于非饱和土热导率估算的修正归一化模型,该模型对于粗粒土具有较高的预测精度,细粒土则需考虑区域差别进行修正.     

Postflashover fires — an overview of the research at the national research council of Canada (NRCC), 1970–1985

The NRCC model of fully developed compartment fires is discussed. Although the mathematics involved is quite simple, it allows a rather comprehensive simulation of the fire process. The model offers an explanation for the findings that ventilation control is related to the pyrolysis mechanism and is not a result of scarcity of air in the fire compartment, and that thermal feedback is of secondary importance in the burning (pyrolysis) of cellulosic fuels. Another feature of the model is the introduction of the normalized heat load concept. The normalized heat load is a scalar quantity that depends on the total heat absorbed by the compartment boundaries during the fire incident, and is practically independent of the temperature history of the fire. A simple explicit formula has been proposed and proved experimentally to describe the normalized heat load for real-world fires with fair accuracy. The normalized heat load concept offers a simple means for converting fire severities into fire resistance requirements, and makes it possible to design buildings for prescribed levels of structural fire safety. The potential of fires to spread by convection and the expected characteristics of fires of noncharring plastics are also discussed. Reference: T. Z. Harmathy, Postflashover Fires—An Overview of the Research at the National Research Council of Canada (NRCC), 1970–1985,Fire Technology, Vol. 22, No. 3, August 1986, p. 210.     

静态环境下基于分段变步长NLMS 的收发隔离技术

收发隔离是干扰机系统中的关键问题,若隔离度不够,轻则削弱干扰机效率,重则造成自激使干扰机不能正常工作。传统的最小均方(LMS)算法应用到基于自适应系统辨识的收发隔离中时,由于精度不够,隔离性能并不理想。针对该问题,提出一种分段变步长归一化LMS(NLMS)算法。该算法利用迭代系数状态因子对迭代系数与真实系数逼近状态进行分段,当迭代系数状态因子处于不同的区间时,采用不同的变步长方案。理论分析和仿真证明:与基于其他LMS 算法的隔离方案相比,基于分段变步长NLMS 算法的收发隔离方案隔离性能有较大的改善。     

基于ANMF和非线性映射距离扩展目标检测

针对距离扩展目标的检测问题,提出一种自适应归一化匹配滤波（ANMF）、非线性映射和高阶互相关积累（HOCC）相结合的目标检测方法。首先将距离像按慢时间进行脉冲维划分,得到若干脉冲子区间,再对每个脉冲子区间进行自适应归一化匹配滤波,然后利用非线性函数对滤波的输出进行非线性映射处理,最后将非线性映射的输出进行高阶互相关积累,从而获得检测统计量。仿真实验结果表明,在检测概率为80％时,所述方法比传统 ANMF 方法所需的信杂比低1 dB 左右,性能较为优越。     

论红外光学系统消热差技术中的归一化系数

温度变化对透镜成像效果的影响称为热差.为了使透镜在一定温度范围内具有稳定的成像质量,通常需要通过采取某些补偿措施来实现消热差.归一化系数是消热差数学模型的重要组成部分.讨论了归一化系数的概念及其在消热差技术中的应用情况.基于国内相关文献资料,介绍了红外光学系统消热差技术的发展思路与动态.     

Simple image intensity compensation (SIMIC) method prior to application of distortion correction algorithms in brain diffusion Tensor Magnetic Resonance Imaging: Validation test for two cost functions of distortion correction algorithms

The purpose of this study is to design a simple image intensity compensation (SIMIC) method prior to the application of a variety of cost functions for distortion correction in diffusion tensor imaging (DTI). The synthetic dataset consists of each direction of diffusion weighted imaging (DWI) made by multiplication of nondiffusion weighted image (b = 0 image) and tensor matrices. We added the effects of patient motion and eddy current distortion using translation, rotation, scaling and shearing matrices. We calculated the b = 0 image of each direction from original DTI, inversely. A co‐registration method was applied to the extracted b = 0 images of each direction based on the original b = 0 image and then, the transformation matrices were generated and the original DTI were transformed using this transformation matrix. For the DTI distortion correction, two kinds of cost functions, normalized mutual information (NMI) and normalized cross‐correlation (NCC), were used. Visual assessments and quantitative measurements were used to evaluate the results. When using the NMI as a cost function, the quantitative results showed no significant differences between NMI and NMI with SIMIC method. However, there are significant differences compared with using the NCC as a cost function. Our study showed cost function for image distortion correction with SIMIC method improved the results both quantitatively and in terms of qualitative accuracy. This method may be helpful for DTI analysis and helpful for increasing accuracy. © 2015 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 25, 328–33, 2015