| Al/SiC复合材料激光快速成形的研究 |
| |
| 引用本文： | 程晶,张永忠,高士友,石力开,席明哲.Al/SiC复合材料激光快速成形的研究[J].稀有金属,2002,26(3):179-182. |
| |
| 作者姓名： | 程晶 张永忠 高士友 石力开 席明哲 |
| |
| 作者单位： | 北京有色金属研究总院,北京,100088 |
| |
| 基金项目： | 国家”973”计划资助项目 (G2 0 0 0 0 672 0 5 1) |
| |
| 摘 要： | 激光快速成形技术制备Al/SiC复合材料基于快速成形原理，通过激光熔化同轴输送的Al/SiC复合粉末，在基板上直接成形出薄壁样品。鉴于Al/SiC复合粉末的特点，采用基板预热并预涂覆吸光涂层以降低所需的激光功率，避免铝的过度熔化和SiC的分解。所制得的Al/SiC复合材料组织均匀、细小，SiC分解量很少且分布均匀，有少量的Al4C3,Al4SiC4及单质硅生成。
|
| 关 键 词： | Al／SiC 复合材料 激光快速成形 铝碳化硅 组织性能 |
| 文章编号： | 0258-7076(2002)03-0179-04 |
| 修稿时间： | 2001年9月18日 |
Al/SiC Composite Made by Laser Direct Deposition |
| |
| Cheng Jing,Zhang Yongzhong,Gao Shiyou,Shi Likai and Xi Mingzhe.Al/SiC Composite Made by Laser Direct Deposition[J].Chinese Journal of Rare Metals,2002,26(3):179-182. |
| |
| Authors: | Cheng Jing Zhang Yongzhong Gao Shiyou Shi Likai and Xi Mingzhe |
| |
| Abstract: | Al/SiC composite was produced by laser direct deposition. The thin wall composite was directly obtained by laser melting the Al/SiC powder which were evenly mixed and delivered coaxially. On account of the characteristics of the Al/SiC powder, the Al alloy substrate was pre heated and coated with light absorption material to reduce the required laser power which will prevent the excessive melting of Al and the decomposition of SiC. The microstructure of obtained Al/SiC composite is fine. SiC particles are distributed evenly with little decomposition, and a small quantity of Al 4SiC 4,Al 4C 3 and Si are formed. |
| |
| Keywords: | Laser direct deposition Composite Al SiC Microstructure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
