| 固化温度和后处理温度对EP/碳布复合材料弯曲性能的影响 |
| |
| 引用本文： | 王志远,陈刚,郑志才,吴忠泉,崇琳,王忠,于倩倩,王启芬.固化温度和后处理温度对EP/碳布复合材料弯曲性能的影响[J].工程塑料应用,2011,39(4):22-25. |
| |
| 作者姓名： | 王志远 陈刚 郑志才 吴忠泉 崇琳 王忠 于倩倩 王启芬 |
| |
| 作者单位： | 中国兵器工业集团第五三研究所,济南,250031 |
| |
| 摘 要： | 采用热压罐成型法制备了EP/碳布复合材料,研究了固化温度和后处理温度对复合材料弯曲性能的影响.结果表明,180℃固化的复合材料的弯曲强度和弯曲弹性模量高于120、150℃固化的复合材料;以180℃作为最高固化温度时,与不进行后处理相比,在180℃处理1 h后复合材料的弯曲强度得到大幅度的提高;较优的固化工艺参数为固化温...
|
| 关 键 词： | 环氧树脂 碳布 固化 后处理 |
EFFECTS OF CURING TEMPERATURE AND POST-TREATMENT TEMPERATURE ON FLEXURAL PROPERTIES OF EPOXY RESIN/CARBON-CLOTH COMPOSITES |
| |
| Wang Zhiyuan,Chen Gang,Zheng Zhicai,Wu Zhongquan,Chong Lin,Wang Zhong,Yu Qianqian,Wang Qifen.EFFECTS OF CURING TEMPERATURE AND POST-TREATMENT TEMPERATURE ON FLEXURAL PROPERTIES OF EPOXY RESIN/CARBON-CLOTH COMPOSITES[J].Engineering Plastics Application,2011,39(4):22-25. |
| |
| Authors: | Wang Zhiyuan Chen Gang Zheng Zhicai Wu Zhongquan Chong Lin Wang Zhong Yu Qianqian Wang Qifen |
| |
| Affiliation: | (CNGC Institute 53,Jinan 250031,China) |
| |
| Abstract: | The epoxy resin/carbon-cloth composite were manufactured by autoclave molding,and the effect of curing temperature and post-treatment temperature on the flexural properties of the composite was studied.The results showed that the flexural strength and modulus of the composite cured in 180℃ were higher than that cured in 120℃ and 150℃.When 180℃ was adopted as the highest curing tempwrature,comparing with non post-treatment,flexural strength of the composite with post-treatment process of 180℃ and 1 h greatly increased.The best curing process parameters were that curing temperature was 180℃,post-treatment temperature was 180℃ and post-treatment time was 1 h. |
| |
| Keywords: | epoxy resin carbon-cloth curing post-treatment |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
