| 固溶处理对T-250马氏体时效钢的组织及力学性能的影响 |
| |
| 引用本文： | 张强,王明鉴,张立武,余大兵,杨延涛,吴军. 固溶处理对T-250马氏体时效钢的组织及力学性能的影响[J]. 材料热处理学报, 2004, 25(6): 30-34 |
| |
| 作者姓名： | 张强 王明鉴 张立武 余大兵 杨延涛 吴军 |
| |
| 作者单位： | 西安航天动力机械厂,陕西,西安,710025;西北工业大学航天学院,陕西,西安,710072 |
| |
| 摘 要： | 通过透射电镜(TEM)研究T-250马氏体时效钢组织变化，结合断口扫描电镜(SEM)观察，研究固溶温度和保温时间对T-250马氏体时效钢的组织及力学性能的影响。结果表明，T-250马氏体时效钢固溶态的硬度在280～292HB之间，几乎不受固溶温度和保温时间的影响；T-250马氏体时效钢中的马氏体形貌为板条状，且板条形貌不随固溶温度的升高和保温时间的延长而变化；固溶温度和保温时间对固溶态T-250马氏体时效钢的拉伸性能和冲击韧性的影响不大，固溶态T-250马氏体时效钢具有良好塑性和韧性。
|
| 关 键 词： | T-250马氏体时效钢 固溶处理 力学性能 |
| 文章编号： | 1009-6264(2004)06-0030-05 |
Effect of Solution Treatment on Mechanical Properties and Microstructure of T-250 Maraging Steel |
| |
| ZHANG Qiang WANG Ming-jian,ZHANG Li-wu,YU Da-bing,YANG Yan-tao,WU Jun. Effect of Solution Treatment on Mechanical Properties and Microstructure of T-250 Maraging Steel[J]. Transactions of Materials and Heat Treatment, 2004, 25(6): 30-34 |
| |
| Authors: | ZHANG Qiang WANG Ming-jian ZHANG Li-wu YU Da-bing YANG Yan-tao WU Jun |
| |
| Affiliation: | ZHANG Qiang1 WANG Ming-jian2,ZHANG Li-wu1,YU Da-bing1,YANG Yan-tao1,WU Jun1 |
| |
| Abstract: | The influence of temperature and time of solution treatment on mechanical properties and microstructure of T-250 maraging steel has been investigated by TEM and SEM.The results show that the hardness of T-250 maraging steel varies between 280HB and 292HB and is independent of solution temperature and solution time. Microstructure of the maraging steel treated by solid solution is lath martensite and the steel has good toughness and its mechanical properties is independent of solution treatment. |
| |
| Keywords: | T-250 maraging steel solution treatment mechanical properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
