A stabilized foam formulation using FTP-SDS surfactants for wettability alteration and flow diversion in carbonate fractured oil reservoirs

Foam injection contributes to improved oil recovery through flow diversion, reduction of interfacial tension (IFT), and wettability alteration of the rock while its stability is an issue. In this article, nitrogen-foam was optimally formulated using fluorocarbon tubiguard protect (FTP) surfactant stabilized with sodium dodecyl sulfate (SDS) co-surfactant that was later experimentally considered for oil recovery in a fractured carbonate rock taken from an oil field in the Middle East. The results showed that the 5:1 volume ratio of fluorocarbon surfactant and SDS (FS51) generates a stable foaming agent with ability of changing the wettability of the carbonate rock surfaces to an intermediate gas-wet state. A series of core-flood experiments at HPHT conditions were also carried out and designed to properly represent matrix-fracture media using both a horizontally and vertically oriented setup. The oil saturated cores were flooded with nitrogen gas first followed by foam injection. It was concluded that foam can divert the gas to flow from fractures to the matrix blocks and result in a significant oil recovery. The contact angle tests that performed after core-flood experiments revealed the wettability changes of fracture surfaces from an oil-wet to a gas-wet state. This allows gas to be imbibed into the matrix blocks by capillary force and results in enhancement of ultimate oil recovery. This study revealed that trapped oil in matrixes blocks that had not been drained during the gas injection process could be produced by designing a stable foam that sustainably diverts injected fluid from fractures to matrix zone.