| 弧面凸轮工作廓面高频淬火工艺的研究 |
| |
| 引用本文： | 郑昊,曹西京,周瑞,李杰.弧面凸轮工作廓面高频淬火工艺的研究[J].机械设计与制造,2011(5). |
| |
| 作者姓名： | 郑昊 曹西京 周瑞 李杰 |
| |
| 作者单位： | 陕西科技大学,西安,710021 |
| |
| 摘 要： | 通过对弧面凸轮工作环境和状态的研究,分析国内外目前弧面凸轮常用热处理方法优缺点,提出采用高频感应加热淬火的方法对弧面凸轮进行淬火加热.并在研究弧面凸轮加工方法、加工原理及高频淬火工艺的基础上,结合对孤面凸轮运动规律曲线、位移方程及感应加热原理的分析,利用三维制图软件Pro/E绘出弧面凸轮与感应线圈的位置关系及弧面凸轮从动件运动曲线,提出通过控制感应线圈模拟凸轮从动件的运动轨迹,达到对弧面凸轮工作廓面淬火的目的.
|
| 关 键 词： | 弧面凸轮 工作廓面 高频淬火 |
Study on high-frequency quenching process for working profile of the roller gear cam |
| |
| ZHENG Hao,CAO Xi-jing,ZHOU Rui,LI Jie.Study on high-frequency quenching process for working profile of the roller gear cam[J].Machinery Design & Manufacture,2011(5). |
| |
| Authors: | ZHENG Hao CAO Xi-jing ZHOU Rui LI Jie |
| |
| Affiliation: | ZHENG Hao,CAO Xi-jing,ZHOU Rui,LI Jie(Shaanxi University of Science and Technology,Xi'an 710021,China) |
| |
| Abstract: | Through researching of the working state and environment of the roller gear cam,advantages and disadvantages of the roller gear cam heat treating methods available both home and abroad are analyzed.Then high frequency induction heating method is proposed for quenching the roller gear cam.Basing on the researching of the processing way,the processing principles of the roller gear cam and high-frequency quenching process,combining with the analysis of motion curve of the roller gear cam,the displacement equat... |
| |
| Keywords: | Roller gear cam Working profile High-frequency quenching |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
