|
|||||
|
|
| 灰口铸铁多层熔覆Ni基合金工艺试验与应用 | |
| 引用本文： | 骆芳,陆超,姚建华. 灰口铸铁多层熔覆Ni基合金工艺试验与应用[J]. 应用激光, 2005, 25(1): 35-37 |
| 作者姓名： | 骆芳 陆超 姚建华 |
| 作者单位： | 1. 浙江工业大学之江学院 2. 浙江巨化电石有限公司 3. 浙江工业大学机电学院 |
| 摘 要： | 采用灰口铸铁作为基体材料,在不预热情况下通过增加Ni25过渡合金熔覆层,再用Ni45合金进行熔覆实验;由于过渡合金熔覆层中的Ni提高了奥氏体的稳定性,缓解了组织内产生的残余应力,减缓硬度梯度,多次堆焊加热使其热应力在该区域得到缓释,消除裂纹产生。同时又由于Ni45熔覆层中的高Cr使钢的共析成分点左移,同时产生Cr19Fe7Ni11金属化合物,因此提高了修复层的硬度,熔覆层厚度6mm。经修复后的罗茨鼓风机转鼓,加工后能满足机械装配精度及设备厂性能,耐磨性大大提高。 |
| 关 键 词： | 灰铁 过渡合金层 组织性能 抗裂性 |
The Influence of Ni-base Alloy Layer on Microstructure Properties of Laser Multi-layer Bead Welding |
|
| Luo Fang,Lu Chao,YAO Jianhua. The Influence of Ni-base Alloy Layer on Microstructure Properties of Laser Multi-layer Bead Welding[J]. Applied Laser, 2005, 25(1): 35-37 | |
| Authors: | Luo Fang Lu Chao YAO Jianhua |
| Abstract: | Used Grey Iron as bulk material, the laser bead welding experiment was proceeded by adding Ni25 transition alloy welding layer and choosing Ni45 alloy welding in the case of no pro-heating. The Ni added alloying agents changed the percentage of Austenite in the laser cladding layer, so increased the plasticity and ductility of the matrix and bead welding layer, and then depressed the cracks. Meanwhile, high level of Cr of nickel-base alloy can made eutectoid point left shift, and engender metallic compound Cr19Fe7Ni11,so the hardness of bead welding layer was increased. after rebuilt rotating clrum of blast engin, wear-resisting property was increase |
| Keywords: | Grey Iron transition alloy layer structure and performance crack resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |