| 川渝气田FF-NL级采气井口阀门腐蚀失效分析 |
| |
| 引用本文： | 江晶晶,张强,常宏岗,蔡忠明,张昌会,袁曦,张东岳,莫林.川渝气田FF-NL级采气井口阀门腐蚀失效分析[J].石油与天然气化工,2016,45(3):76-81. |
| |
| 作者姓名： | 江晶晶 张强 常宏岗 蔡忠明 张昌会 袁曦 张东岳 莫林 |
| |
| 作者单位： | 中国石油西南油气田公司天然气研究院;国家能源高含硫气藏开采研发中心 ;中国石油天然气集团公司高含硫气藏开采先导试验基地,中国石油西南油气田公司天然气研究院;国家能源高含硫气藏开采研发中心 ;中国石油天然气集团公司高含硫气藏开采先导试验基地,中国石油西南油气田公司天然气研究院;国家能源高含硫气藏开采研发中心 ;中国石油天然气集团公司高含硫气藏开采先导试验基地,中国石油西南油气田公司川中油气矿,中国石油西南油气田公司川中油气矿,中国石油西南油气田公司天然气研究院;国家能源高含硫气藏开采研发中心 ;中国石油天然气集团公司高含硫气藏开采先导试验基地,中国石油西南油气田公司天然气研究院;国家能源高含硫气藏开采研发中心 ;中国石油天然气集团公司高含硫气藏开采先导试验基地,中国石油西南油气田公司天然气研究院;国家能源高含硫气藏开采研发中心 ;中国石油天然气集团公司高含硫气藏开采先导试验基地 |
| |
| 摘 要： | 以川渝气田某FF-NL级采气井口阀门为例,对阀门进行机械切割分析。发现由阀体、阀板、阀座组成的流体介质通道处于井口高温高压高流速的气液混输腐蚀环境中,通道内表面容易受到电化学腐蚀和机械冲蚀的双重作用,冲刷腐蚀及点蚀现象比较明显。阀杆和阀板因选择材料不同,表现出电偶腐蚀特征,密封失效。轴承组件受力部位在腐蚀介质作用下,出现压应力诱导腐蚀。此外,阀座和阀体贴合面具备产生缝隙腐蚀的条件。室内模拟腐蚀评价实验结果表明,阀门主体材质12Cr13在模拟现场工况下腐蚀严重,与718镍基合金形成电偶后腐蚀速率明显增加。
|
| 关 键 词： | 含硫气田 腐蚀 阀门 电偶腐蚀 |
| 收稿时间： | 2015/9/10 0:00:00 |
Corrosion failure analysis of FF-NL level gas wellhead valves in Sichuan and Chongqing gas field |
| |
| Jiang Jingjing,Zhang Qiang,Chang Honggang,Cai Zhongming,Zhang Changhui,Yuan Xi,Zhang Dongyue and Mo Lin.Corrosion failure analysis of FF-NL level gas wellhead valves in Sichuan and Chongqing gas field[J].Chemical Engineering of Oil and Gas,2016,45(3):76-81. |
| |
| Authors: | Jiang Jingjing Zhang Qiang Chang Honggang Cai Zhongming Zhang Changhui Yuan Xi Zhang Dongyue and Mo Lin |
| |
| Affiliation: | Research Institute of Natural Gas Technology, PetroChina Southwest Oil and Gasfield Company, Chengdu 610213, China;National Energy R&D Center of High Sulfur Gas Exploitation, Chengdu 610000, China;High Sulfur Gas Exploitation Pilot Test Center, CNPC, Chengdu 610213, China,Research Institute of Natural Gas Technology, PetroChina Southwest Oil and Gasfield Company, Chengdu 610213, China;National Energy R&D Center of High Sulfur Gas Exploitation, Chengdu 610000, China;High Sulfur Gas Exploitation Pilot Test Center, CNPC, Chengdu 610213, China,Research Institute of Natural Gas Technology, PetroChina Southwest Oil and Gasfield Company, Chengdu 610213, China;National Energy R&D Center of High Sulfur Gas Exploitation, Chengdu 610000, China;High Sulfur Gas Exploitation Pilot Test Center, CNPC, Chengdu 610213, China,Central Sichuan Oil and Gas District, PetroChina Southwest Oil and Gasfield Company, Suining 629000, China,Central Sichuan Oil and Gas District, PetroChina Southwest Oil and Gasfield Company, Suining 629000, China,Research Institute of Natural Gas Technology, PetroChina Southwest Oil and Gasfield Company, Chengdu 610213, China;National Energy R&D Center of High Sulfur Gas Exploitation, Chengdu 610000, China;High Sulfur Gas Exploitation Pilot Test Center, CNPC, Chengdu 610213, China,Research Institute of Natural Gas Technology, PetroChina Southwest Oil and Gasfield Company, Chengdu 610213, China;National Energy R&D Center of High Sulfur Gas Exploitation, Chengdu 610000, China;High Sulfur Gas Exploitation Pilot Test Center, CNPC, Chengdu 610213, China and Research Institute of Natural Gas Technology, PetroChina Southwest Oil and Gasfield Company, Chengdu 610213, China;National Energy R&D Center of High Sulfur Gas Exploitation, Chengdu 610000, China;High Sulfur Gas Exploitation Pilot Test Center, CNPC, Chengdu 610213, China |
| |
| Abstract: | This paper focuses on the analysis of machine cutting on some FF-NL level valves used in wellheads in Sichuan and Chongqing gas field. Through analysis it is found out that the fluid medium channel, composed of valve, valve plate and valve base, is in corrosive and gas-liquid multiphase environment with high temperature, high pressure and high velocity, and the inner surface of the channel tends to be influenced by both of electrochemical and mechanical impact-corrosion, so the erosion and pitting corrosion relatively stand out. Because of the difference in material selection, valve rod and valve plate show the feature of galvanic corrosion and sealing failure. While in corrosive environment, bearing assemblies tend to show stress-induced corrosion. Furthermore, the binding face between valve base and body is qualified for crevice corrosion. The indoor results of simulated corrosion indicate that the main material 12Cr13 of valve has more severe corrosion in simulated working condition. After forming the galvanic couple by 12Cr13 and 718 nickel base alloy, the corrosion rate increases obviously. |
| |
| Keywords: | sour gas field corrosion valve galvanic corrosion |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《石油与天然气化工》浏览原始摘要信息 |
|
点击此处可从《石油与天然气化工》下载全文 |
|
