Corrosion behavior of 2205 stainless steel in simulated flue gas condensate with different chloride concentrations in a waste incineration power plant

The effect of Cl^? on the initial corrosion behavior of 2205 duplex stainless steel (2205 DSS) in simulated flue gas condensate from a waste incineration power plant was investigated using Mott–Schottky plot, micro-area electrochemical methods, and microscopic surface morphology observation. The results show that at 150°C, the carrier concentration of the 2205 DSS passive film was maintained at a small value and changed little when the Cl^? concentration is less than 25 g/L, indicating that it has good pitting resistance. When the Cl^? concentration reaches 30 g/L and above, the carrier concentration of the passive film increases remarkably, and pitting corrosion appears on the 2205 DSS surface. At 180°C, there is no obvious pitting on the surface when the Cl^? concentration is not more than 15 g/L. When the Cl^? concentration is 20 g/L or above, the carrier concentration of the passive film significantly increases, and pitting corrosion appears on the surface. When the Cl^? concentration reaches 30 g/L, the carrier concentration of the passive film increases sharply. The passive film on a 2205 DSS surface is seriously damaged and accompanied by the occurrence of uniform corrosion.