首页 | 本学科首页   官方微博 | 高级检索  
     

高压流体过冷流动沸腾的数值模拟
引用本文:孙霖,姜勇,周爱民,陈剑. 高压流体过冷流动沸腾的数值模拟[J]. 化学工程, 2011, 39(10): 92-95
作者姓名:孙霖  姜勇  周爱民  陈剑
作者单位:1. 海军驻719所军事代表室,湖北武汉,430064
2. 武汉第二船舶设计研究所,湖北武汉,430064
摘    要:在二流体模型基础上,采用RPI模型计算加热壁面的相间质量传输,对竖直圆管内高压流体过冷沸腾流动过程进行数值模拟.研究发现:壁面温度沿流动方向有明显拐点.根据壁温变化趋势可以判断,转折点位置即为过冷沸腾起始点;管内流体速度的增长曲线并不是简单单调递增的过程,而是速度增长由刚开始的缓慢上升到急剧上升,与空泡份额的分布曲线相...

关 键 词:过冷沸腾  二流体模型  空泡份额  数值模拟

Numerical simulation for subcooled boiling process of high pressure liquid
SUN Lin,JIANG Yong,ZHOU Ai-min,CHEN Jian. Numerical simulation for subcooled boiling process of high pressure liquid[J]. Chemical Engineering, 2011, 39(10): 92-95
Authors:SUN Lin  JIANG Yong  ZHOU Ai-min  CHEN Jian
Affiliation:SUN Lin1,JIANG Yong2,ZHOU Ai-min2,CHEN Jian2(1.Naval Military Commissary Unit of 719 Research Institute,Wuhan 430064,Hubei Province,China,2.Wuhan 2nd Ship Design and Research Institute,China)
Abstract:A numerical study was performed for subcooled boiling process of high pressure liquid on the basis of two-fluid model,the RPI model was used to calculate the mass transfer on the heating wall between two phases.The results show that there is an obvious turning point of wall temperature along with flow direction,which demonstrates the onset point of subcooled boiling according to the variation of wall temperature.The fluid velocity is not in linear increase,which increases gradually at first and then increas...
Keywords:subcooled boiling  two-fluid model  void fraction  numerical simulation  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号