| 扫描喷射电沉积制备多孔金属镍 |
| |
| 引用本文： | 曹银风,黄因慧,田宗军,刘志东,杨成博. 扫描喷射电沉积制备多孔金属镍[J]. 电镀与环保, 2010, 30(3): 17-20 |
| |
| 作者姓名： | 曹银风 黄因慧 田宗军 刘志东 杨成博 |
| |
| 作者单位： | 南京航空航天大学机电学院,江苏,南京,210016;南京航空航天大学机电学院,江苏,南京,210016;南京航空航天大学机电学院,江苏,南京,210016;南京航空航天大学机电学院,江苏,南京,210016;南京航空航天大学机电学院,江苏,南京,210016 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 采用扫描喷射电沉积制备具有一定厚度、孔隙率较高、组织较均匀的多孔金属镍;并研究了在不同扫描速率、喷嘴高度等实验条件下,多孔金属镍电沉积生长的行为特性;最后应用图形处理软件Image J对多孔金属镍的孔隙率和相对密度进行分析,得到了最佳实验参数.结果表明:采用扫描速率为4 mm/s时,孔隙结构相当完善;当喷嘴高度为6 mm时,孔隙率和相对密度比较适中.
|
| 关 键 词： | 喷射电沉积 多孔金属镍 扫描速率 孔隙率 |
Preparation of Porous Metal Nickel by Scanning Jet-Electrodeposition |
| |
| CAO Yin-feng,HUANG Yin-hui,TIAN Zong-jun,LIU Zhi-dong,YANG Cheng-bo. Preparation of Porous Metal Nickel by Scanning Jet-Electrodeposition[J]. Electroplating & Pollution Control, 2010, 30(3): 17-20 |
| |
| Authors: | CAO Yin-feng HUANG Yin-hui TIAN Zong-jun LIU Zhi-dong YANG Cheng-bo |
| |
| Affiliation: | CAO Yin-feng,HUANG Yin-hui,TIAN Zong-jun,LIU Zhi-dong,YANG Cheng-bo(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China) |
| |
| Abstract: | A porous metal nickel with certain thickness,high porosity and uniform structure was prepared by jet-electrodeposition.The behavior characteristics of the electrodeposition growth of porous metal nickel were investigated under the conditions of different scanning speeds and nozzle heights.At last,the porosity and relative density of the porous nickel were analyzed by using software Image J,and the best test parameters were found out.The results show that the pore structure is quite perfect when the scanning... |
| |
| Keywords: | Jet-electrodeposition porous metal nickel scanning speed porosity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
