|
|||||
|
|
| 机械诱发自蔓延反应合成Ti(C,N)粉体的固态相变 | |
| 引用本文： | 袁泉,郑勇,吴鹏,余海州. 机械诱发自蔓延反应合成Ti(C,N)粉体的固态相变[J]. 材料科学与工程学报, 2011, 0(3) |
| 作者姓名： | 袁泉 郑勇 吴鹏 余海州 |
| 作者单位： | 南京航空航天大学材料科学与技术学院; |
| 基金项目： | 国家自然科学基金资助项目(50674057) |
| 摘 要： | 利用机械合金化方法以Ti粉、石墨粉和高纯氮气为原料,制备出Ti(C,N)粉体。利用X射线衍射、正电子湮灭寿命谱、X光电子能谱以及扫描电镜等分析手段,研究了球磨过程中混合粉的相组成、缺陷类型、粉体形貌及尺寸的变化。实验结果表明:Ti(C,N)粉体的合成遵循机械诱发自蔓延反应机制,中间相TiN的出现是导致反应进行的关键阶段。 |
| 关 键 词： | 机械合金化 Ti(C N) 固态相变 |
Preparation of Ti(C,N) Powders by Mechanically Induced Self-propagation Reaction |
|
| YUAN Quan,ZHENG Yong,WU Peng,YU Hai-zhou. Preparation of Ti(C,N) Powders by Mechanically Induced Self-propagation Reaction[J]. Journal of Materials Science and Engineering, 2011, 0(3) | |
| Authors: | YUAN Quan ZHENG Yong WU Peng YU Hai-zhou |
| Affiliation: | YUAN Quan,ZHENG Yong,WU Peng,YU Hai-zhou(College of Materials Science & Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China) |
| Abstract: | Ti(C,N) powders had been synthesized by mechanical alloying from the mixture of pure titanium and graphite in nitrogen atmosphere.The phase composition,defect type and the size and morphology of mixture milled for different times were analyzed by using X-ray diffractometry(XRD),X-ray photoelectron spectroscopy(XPS),positron annihilation lifetime spectroscopy(PALS) and scanning electron microscopy(SEM).The results showed that mechanism of synthesizing Ti(C,N) powders was mechanically induced self propagating... |
| Keywords: | mechanical alloying Ti(C N) solid-state phase transformation |
| 本文献已被 CNKI 等数据库收录！ | |