首页 | 本学科首页   官方微博 | 高级检索  
     

径向多齿轮流量变送器测量系统设计
引用本文:卫国海,张军,李宪华.径向多齿轮流量变送器测量系统设计[J].液压气动与密封,2006(4):44-46.
作者姓名:卫国海  张军  李宪华
作者单位:1. 安徽理工大学机械系,安徽淮南,232001
2. 安徽理工大学机械系,安徽淮南,232001;中国矿业大学(北京)机电学院,北京,100083
基金项目:安徽省教育厅自然科学基金
摘    要:基于非接触式齿轮速度传感器检测原理,设计了一种径向多齿轮流量变送器测量系统。该变送器的流量脉动只有单片普通齿轮变送器脉动的1/16,可用来测量高压液压系统动态流量。先将被测流体的流量信号转换为转速信号,再用GTS系列的非接触式齿轮速度传感器检测出齿轮的转速,经过AT89S52单片机的容积/脉冲换算和处理,最终确定被测系统的动态流量。该流量计具有测量范围大、精度高、可靠性好等优点。

关 键 词:径向多齿轮动态流量计  高压液压系统  流量检测  单片机
文章编号:1008-0813(2006)04-0044-03
修稿时间:2006年4月16日

Design of a flow detection system of radial multi-gear flow-meter
WEI Guo-hai,ZHANG Jun,LI Xian-hua.Design of a flow detection system of radial multi-gear flow-meter[J].Hydraulics Pneumatics & Seals,2006(4):44-46.
Authors:WEI Guo-hai  ZHANG Jun  LI Xian-hua
Abstract:Based on the method of non-contact pick-off detection of gear tooth, the detection system of a radial multi- gear flow was designed. The flow pulse of the flowmeter has a 1/16 pulse of single gear to measure dynamic flow of a high-pressure hydraulic system. At first, the system changes the flow signal to a rotary signal, secondly measures the wheel rotation by two non-contact pick-offs, then converts and treats volume/pulse by AT89S52, finally the dynamic flow of the measuring system is measured. The flow--meter has the following characteristics: wide measuring, high accuracy and good reliability.
Keywords:redial multi gear dynamic flow-meter  high pressure hydraulic system  flow detection  MCU
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号