The stability of α-Sn grown on CdTe by molecular beam epitaxy

We have examined the effect of the substrate orientation, thickness, growth rate, substrate temperature and inclusion of small amounts of Ge on the transition temperature of α-Sn films grown on CdTe. The transition temperature from α-Sn to β-Sn was determined by optical microscopy to be as high as 132° C. CdTe(ll0) is a somewhat better orientation than CdTe(100), and CdTe(lll)B appears to be totally unacceptable. The transition temperature from α-Sn to β-Sn depends on the film thickness; thinner films have a somewhat higher transition temperature than thicker films. The film quality can be increased by lowering the growth rate and raising the growth temperature to about 75° C. Since the transition from α-Sn to β-Sn starts at defects in the film, improving the film quality by lowering the growth rate and raising the growth temperature raises the transition temperature. Also by adding small amounts of Ge (∼2%) the transition temperature of films grown on CdTe can be significantly increased.