| 考虑馈线负荷分布的10kV配电线路合环电流计算 |
| |
| 引用本文： | 张荣安,;彭显刚,;翁奕珊,;李向楠,;裴星宇.考虑馈线负荷分布的10kV配电线路合环电流计算[J].广东电力,2014(7):111-115. |
| |
| 作者姓名： | 张荣安 ;彭显刚 ;翁奕珊 ;李向楠 ;裴星宇 |
| |
| 作者单位： | [1]广东工业大学自动化学院,广东广州510006; [2]广东电网公司珠海供电局,广东珠海519000 |
| |
| 基金项目： | 中国南方电网有限责任公司科技项目（ K-GD-2014-0891 ） |
| |
| 摘 要： | 由于10 kV馈线负荷数据多且分散,研究中往往将馈线负荷集中分布在一点进行考虑。通过建立递增、递减、均匀分布3个典型负荷模型,推导出3种模型对合环开关两侧电压的影响,然后通过叠加原理计算出合环电流,并与负荷集中分布在一点的计算结果进行比较。通过对广东某地区4个合环算例进行计算分析,说明在合环电流计算过程中,考虑馈线负荷分布对合环开关两侧电压的影响是十分必要的,可以提高合环电流计算的准确性。
|
| 关 键 词： | kV馈线负荷 典型负荷模型 开关两侧电压 合环电流 |
Calculation on Loop Current of 10 kV Distribution Line Considering Feeder Load Distribution |
| |
| Affiliation: | ZHANG Rongan, PENG Xiangang, WENG Yishan, LI Xiangnan, PEI Xingyu (1. Faculty of Automation, Guangdong University of Technology, Guangzhou, Guangdong 510006, China; 2. Zhuhai Power Supply Buraeu of Guangdong Power Grid Corporation, Zhuhai, Guangdong 51900, China) |
| |
| Abstract: | For reason of mass and dispersive data of 1 0 kV feeder load,it often centralizes feeder load on one point for stud-y.By establishing three typical load models including progressive increase load model,progressive decrease load model and u-niformly distributed load model,impact on loop switchgear side voltage by these three models was deduced.Based on super-position principle,loop current was calculated and the calculating result was compared with that of load centralization.By calculation analysis on four loop examples in some area in Guangdong province,it showed that in loop current calculation progress,it was very necessary to consider impact of feeder load distribution on loop switchgear side voltage which was able to improve veracity of calculation on loop current. |
| |
| Keywords: | 1 0 kV feeder load typical load model switchgear side voltage loop current |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
