| 涂层硬质合金刀具铣削粉末冶金高温合金的切削性能研究 |
| |
| 引用本文： | 乔阳,艾兴,刘战强,赵军. 涂层硬质合金刀具铣削粉末冶金高温合金的切削性能研究[J]. 四川大学学报(工程科学版), 2010, 42(3): 206-210 |
| |
| 作者姓名： | 乔阳 艾兴 刘战强 赵军 |
| |
| 作者单位： | 山东大学,机械工程学院,高效洁净机械制造教育部重点实验室,山东,济南,250061 |
| |
| 基金项目： | 国家重点基础研究发展计划资助项目(2009CB724402) |
| |
| 摘 要： | 针对粉末冶金高温合金材料的铣削特性,选择了合理的铣刀盘和刀片材质.通过刀具磨损与寿命对比试验优选出了最佳的刀片几何参数,并给出了铣削过程中硬质合金铣刀片的典型磨、破损形态.研究结果表明:TiAlN-TiN涂层硬质合金刀片适于精铣粉末冶金高温合金,在30～70 m/min的铣削速度范围内,刀具寿命可达20～108 min.由于材料切削温度高和机械冲击严重,涂层刀具的主要失效形式为:崩刃和前刀面的剥落,其主要机理为高温条件下磨粒磨损、粘结磨损、扩散磨损和疲劳损坏的综合作用.
|
| 关 键 词： | 粉末冶金高温合金 涂层硬质合金 切削性能 磨损机理 刀具破损 |
| 收稿时间： | 2009-06-14 |
| 修稿时间： | 2009-08-25 |
Study on Cutting Performance of Coated Carbide Tools in Milling of Powder Metallurgy Superalloy |
| |
| Qiao Yang,Ai Xing,Liu Zhanqiang and Zhao Jun. Study on Cutting Performance of Coated Carbide Tools in Milling of Powder Metallurgy Superalloy[J]. Journal of Sichuan University (Engineering Science Edition), 2010, 42(3): 206-210 |
| |
| Authors: | Qiao Yang Ai Xing Liu Zhanqiang Zhao Jun |
| |
| Affiliation: | QIAO Yang,AI Xing,LIU Zhan-qiang,ZHAO Jun (College of Mechanical Eng.,Sh,ong Univ.,Key Lab.of High Efficiency , Clean Mechanical Manufacture,Ministry of Education,Jinan 250061,China) |
| |
| Abstract: | Based on the analysis of milling characteristic,reasonable geometric parameters of milling cutler and coated carbide grade were selected.Reasonable geometric parameters of insert were also selected through contrast experiment of tool wear resistance and tool life,and typical wear and failure form of coated carbide tools during the milling process were presented.It was shown that TiAlN-TiN coated carbide is the proper tool material for the milling process of powder metallurgy superalloy,and the cutting tool ... |
| |
| Keywords: | powder metallurgy superalloy coated carbide tool cutting performance wear mechanism failure |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《四川大学学报(工程科学版)》浏览原始摘要信息 |
|
点击此处可从《四川大学学报(工程科学版)》下载全文 |
|
